Posted July 26, 2016 Tim......absolutley Amazing......your skills are just mind blowing......WOW!!!! Share this post Link to post Share on other sites
Posted July 26, 2016 Extraordinary work, Tim... I'm loving it! Share this post Link to post Share on other sites
Posted July 26, 2016 Holy geez Tim. Impressive, very impressive. And to think you're doing this without any aid from a computer. Share this post Link to post Share on other sites
Posted July 26, 2016 Tim! Very impressive work! It never stops with the amazement factor Share this post Link to post Share on other sites
Posted July 28, 2016 (edited) 40 hours in the pair of these between the research, even with Dave's info that he shared, drawings and actual machining but I can move on. Cheers, tim Edited January 14 by Codi Share this post Link to post Share on other sites
Posted July 28, 2016 That's looking real good, Tim. Share this post Link to post Share on other sites
Posted July 28, 2016 That's way beyond good. Fantastic work. Share this post Link to post Share on other sites
Posted July 28, 2016 i gotta say......it's almost sinful that you're going to cover this engine with a body! are you sure you don't want to build a nostalgia top fuel car? hehe. just kiddin' tim. this thing is SWEEEET!!! Share this post Link to post Share on other sites
Posted July 28, 2016 It is artfully beautiful. Just gorgeous! Share this post Link to post Share on other sites
Posted July 28, 2016 When I saw there was an update, I said, "Oh Boy!! Oh Boy!! Oh Boy!!" I stand by that statement.My name is Joe Goss and I approve this update. Share this post Link to post Share on other sites
Posted July 29, 2016 Tim..... Holy Cow.... There you go again pulling out that Giant Penny.... That right there is some awesome machining work on those valve covers and it sure shows. Now all you need to do is polish those bad boys up and then you will need to wear your at night...lol . Every update this build gets better. I am simply amazed by it and still can't quite grasp that it is 1/25th, Major props to ya. Share this post Link to post Share on other sites
Posted August 1, 2016 (edited) The new girdle and the valve covers are just over the top my friend!!!!! Beautiful to watch someone work to such a high standard. Randy Edited August 1, 2016 by Randy D Share this post Link to post Share on other sites
Posted August 1, 2016 It's always great to see your updates, and this one is no exception. That engine is looking fantastic so far. I can't wait to see more updates on this one. Share this post Link to post Share on other sites
Posted August 2, 2016 (edited) Ray, Manfred, Dave & Dave, Marlowe, Joe, Chris, Randy and Niko......guys, you're very loyal followers and for that I'm very grateful. Sometimes the little things eat up time but it was my choice. I started the valve cover breathers today and have only the base part to do. What you see here are 2 separate parts drilled and pinned together. The length of the top part of the breather is 3.8mm and width is 2.0mm. I used a 1/32" corner rounding end mill to do the 4 sides of the top portion (yes Dave, I am truly nuts). After I get the base done I'm doing the water necks for the front of the heads, which are very convoluted...........then I have to get to some paint and body work on a couple of other builds. One to finish and one to kick-start. cheers, tim btw, Dave (comp1839) thanks for the FED dragster suggestion. I am SERIOUSLY considering it as I want this engine and rear end front and center......did a bunch of research over the weekend..........really intriguing notion I assure you. Also got the some pieces of the block finally assembled AND the ribs (22) put into the crank girdle. Edited January 14 by Codi Share this post Link to post Share on other sites
Posted August 2, 2016 WHAT, No Valves or Rockers!!?? Codi this thing is a piece of Jewelry that just keeps coming together. Share this post Link to post Share on other sites
Posted August 2, 2016 Great googly moogly that is so sick. I'd wear that around my neck to any function. Share this post Link to post Share on other sites
Posted August 2, 2016 That engine is really nice. Beautiful work. Share this post Link to post Share on other sites
Posted August 2, 2016 I'm not sure it was necessary to single Dave out for thinking you're nuts........We all do.They may be small, but I'll bet they are heavy breathers.That's 2 Bazinga's, one for each pair. Share this post Link to post Share on other sites
Posted August 2, 2016 I cant even keep the plastic ones on the bench....let alone make my own out of metal! Share this post Link to post Share on other sites
Posted August 3, 2016 Masterful work, Tim. So, so beautiful. I think Dave's got an excellent point about keeping this piece of art exposed rather than covered up with a body. Share this post Link to post Share on other sites
Posted August 3, 2016 (edited) Thank you fellas and Joe, appreciate the giggles as always. Love your sense of humor. Davewilly, trust me I was scouring the floor more than once picking up pieces making these things. I DID find them thankfully. Today I added the base plates to them. Took some PE pieces that I found from some firm in the UK and stacked them 3 high, re-shaped them a bit with the dremel and then assembled them. These things in real aluminum look pretty sharp in person I must say and I consider it time well spent for what it adds to the engine. Cheers everyone! tim The valve covers are only resting in place on the heads at this point. I'm going to give the v. covers a high polished finish and add the necessary bolts that secure them. Edited January 14 by Codi Share this post Link to post Share on other sites
Posted August 3, 2016 (edited) Tim, Tim, Tim...every descriptive adjective under the sun has already been used to describe this fine piece of manual engineering. If this had been programmed into a CNC, I'd still be very impressed but this was done by hand. Instead of CNC, I think this should be referred to as TNC (Tim Numeric Control). Outstanding!!What are your plans for polishing? Do you have a secret compound or might you be looking for suggestions? I have a number of compounds in various grades of abrasion that I use on my vintage Airstream that will polish it out to a mirror shine. Edited August 3, 2016 by gasser59 Share this post Link to post Share on other sites
Posted August 3, 2016 Tim, wow, I haven't seen the thread in a while and I missed so much! Still amazing! Share this post Link to post Share on other sites
Posted August 3, 2016 o.k......you no longer have an option......F.E.D. ....F.E.D....F.E.D.....F.E.D. and those valve covers........they are gonna blind people if you polish them. please post a warning before your next post!!!!!! Share this post Link to post Share on other sites
