Vande Posted May 28, 2016 Share Posted May 28, 2016 I have been gone for a while, had a deployment, then retirement, and now I am starting to work on some kits again. I have been reading through many of the threads here, and one in particular gave me a huge amount of inspiration to go way outside my comfort zone, and do a completely non-stock build. I also enjoyed reading many of the back stories, so I decided to give it a go. So in the theme of post-apocalypse wrenching, I present the beginning of the story. So while driving there wrecker through the new world, the engine started to give out. While looking to find somewhere to hole up, they found an old big rig garage, and decided to change the engine out of the truck, sorta. I have already done some additional work, will take photos once I get progress. I am thinking of changing the wheels/tires over to offroad, and I think I may keep the GMC frame, and mount it in a way that looks like they cut the front clip off, and lowered it on to the shortened truck frame. One question, does anyone have photos or a link to any builds showing a "stock" peterbilt 359 conventional engine? I have never built one, but would like to keep some realism to the build....oh who am I kidding, I am trying to Cranky on this build...or somewhere between Cranky and Ira.... Quote Link to comment Share on other sites More sharing options...
kilrathy10 Posted May 29, 2016 Share Posted May 29, 2016 (edited) This is actually, a really good idea.....I'd like to see you work this one, my friend.....Looks pretty cool....Kinda gives me an idea, too.... Edited May 29, 2016 by kilrathy10 Quote Link to comment Share on other sites More sharing options...
Vande Posted May 29, 2016 Author Share Posted May 29, 2016 Thank you. I am working on it slowly, I primed the front bumpers after joining them, and I am working on re-doing the radiator using the zip tie trick I saw on here, not sure how it will turn out, but I am gonna try! Quote Link to comment Share on other sites More sharing options...
Vande Posted May 29, 2016 Author Share Posted May 29, 2016 Some updates, not a lot, I need to re-do the radiator, it did not go according to plan... I started on the front bumper, I drilled out the lights, glued in a couple of shoe rivets, and will run recovery chains or something similar through them later on. I tried to see how steady my hands were with the two lights, I can see I am not steady at all anymore. Quote Link to comment Share on other sites More sharing options...
Vande Posted May 29, 2016 Author Share Posted May 29, 2016 Did some work on the radiator, hopefully it will look good once it is done. Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted May 29, 2016 Share Posted May 29, 2016 Very interesting subject ! This should be a very interesting build to follow. Be Well Gator Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted May 30, 2016 Share Posted May 30, 2016 Very interesting! My kind of build! What are you using for the radiator? Are those zip ties? Quote Link to comment Share on other sites More sharing options...
Vande Posted May 30, 2016 Author Share Posted May 30, 2016 Yes, small zip ties, I saw it on someone's build on here, thought I would give it a try, a thin strip of styrene was used to mount them, then a spray of satin plastic fusion, and a silver dry brush Quote Link to comment Share on other sites More sharing options...
Vande Posted June 9, 2016 Author Share Posted June 9, 2016 Finally a little progress! I have been working on it slowly but surely, on to the photos Long ways to go, this was my first attempt at using the salt technique, it wasn't too bad, but it is a challenge to not overdo it. Quote Link to comment Share on other sites More sharing options...
Vande Posted June 26, 2016 Author Share Posted June 26, 2016 I have made a little progress, I am slowly working through the wrecker portion of the truck, hope to make some more progress today! Salted the grill: Salting the wrecker frame: Catch all shot: Rims sprayed with camo black: Assorted parts I need to work on: Have to finish cleaning the grille up from the salting: Wrecker bed is almost done: Wrecker frame, still needs a few areas hand painted and some more muck/mud: Comments/criticisms are always welcome! Quote Link to comment Share on other sites More sharing options...
Vande Posted June 26, 2016 Author Share Posted June 26, 2016 Got the majority of the semi frame together and painted today, a couple pictures: Going to paint the other two tanks a different color to break everything up, my thought is someone doing this sort of work would spray everything in flat colors and make sure there was nothing shiny on the truck to attract attention, as though the entire thing wouldn't attract attention! Will do a brown wash on it tomorrow to give it the dirty appearance it deserves. Quote Link to comment Share on other sites More sharing options...
Vande Posted July 9, 2016 Author Share Posted July 9, 2016 Got a little more done on this one, here are a few pictures: I had an issue with the primer I used as a base coat, it dried as it was spraying, but with the overall look, it looks like there was dirt on the hood and roof when the truck was painted, so I decided to leave it. I now some may not like it, I just thought it was unique, and didn't clean it off. Haven't seen many comments, but still slowly plugging away on this one. Quote Link to comment Share on other sites More sharing options...
dieseldawg142 Posted July 9, 2016 Share Posted July 9, 2016 (edited) .... Edited May 10, 2018 by dieseldawg142 Quote Link to comment Share on other sites More sharing options...
Vande Posted July 9, 2016 Author Share Posted July 9, 2016 I had thought about doing something like that, actually I had built a tank out of a large pill bottle to put between the bed and cab, but after I looked at it, this struck me as something different to do. Hopefully when I get a little further along, it will look more like what I have in mind, I hope. Quote Link to comment Share on other sites More sharing options...
David G. Posted July 11, 2016 Share Posted July 11, 2016 Very interesting project. I'm curious to see how it turns out.David G, Quote Link to comment Share on other sites More sharing options...
Vande Posted July 22, 2016 Author Share Posted July 22, 2016 I have been working on this as time permits, I just keep forgetting to update. I bought some washes and started trying to learn how to use them. For some reason I can't get the washes to flow into just the right spots, I have had to brush it over the area and go back after it is dry with some brush cleaner on a qtip, and it cleans right off. Once I thought the washes looked good, I cleared it with a matte coat to even everything out. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.