kpnuts Posted June 18, 2016 Share Posted June 18, 2016 Hi all well thanks to the generosity of michu (from another forum I am on) I have this kit to build. I will be doing it oob to try and regain some confidence. It is a massive kit (which again I thank him so very much for) my intention (assuming I don't ruin another kit) is when finished to take it apart and add more detail (given the size of this kit that should be more than possible) provided of course I don't ruin it. So wish me luck mates. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 18, 2016 Author Share Posted June 18, 2016 Hi all well here's the start, I've put a 1/24 car (a big one in real life next to the engine just to give an idea of size) Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 19, 2016 Author Share Posted June 19, 2016 Oh well I wish I'd done a bit of research before I painted the engine it's a 61 series pontiac v8 and revells call out for engine colour is yellow(which as we all know is one of the weakest pigments) so after struggling to get a solid colour, I've discovered it should be light blue, now I have to strip it and re do it light blue (not too upset as I didn't like the yellow anyway. Quote Link to comment Share on other sites More sharing options...
LaughingIndian Posted June 19, 2016 Share Posted June 19, 2016 You're not going with a flathead?i just finished my "in-betweener" 1/12 on my way back to 1/8 scale, and going with the deuce as well ... Thanks kp Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 19, 2016 Author Share Posted June 19, 2016 Hi all well i like this colour better than the yellow. Hi Mike I'm going with what's supplied in the kit, I don't know much about these big American engines only that I love the sound of them. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 20, 2016 Author Share Posted June 20, 2016 Hi all, enjoying this engine, sticking strictly to oob but there is so much potential for detailing up. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 22, 2016 Author Share Posted June 22, 2016 Hi all here's the next update.I've put a large 1/24 car along side it for comparison Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 23, 2016 Author Share Posted June 23, 2016 Hi all tonight's bit, according to the instructions the engine is finished and there are no missing gaps in the spures, and the list of parts dosent list it but I'm sure there should be a fan blade ? I no nothing about these big American engines but every other car engine I've seen has one, also I've chosen the chrome exhausts, I wonder do they go blue like bike exhausts. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 25, 2016 Author Share Posted June 25, 2016 Hi all I've decided, as I used to customise bikes in my youth I would do a custom paint job on this I've started the background sky, I'm intending to do dragons and stuff on it, I've done it matt so I can draw and paint on it then in the end I will gloss it. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted June 25, 2016 Share Posted June 25, 2016 Looking good so far. Curious to see what you do with the paint Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 26, 2016 Author Share Posted June 26, 2016 Hi all made a start on the paint. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted June 26, 2016 Share Posted June 26, 2016 Nice dragon. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted June 26, 2016 Share Posted June 26, 2016 Very nice artwork. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 28, 2016 Author Share Posted June 28, 2016 HI all here is the next dragon going on. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted June 28, 2016 Share Posted June 28, 2016 What technique did you use for the mural? Really looks great. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 28, 2016 Author Share Posted June 28, 2016 It's artists acrylics thinned to try and remove brush marks, after a few coats of gloss and some sanding, hopefully the brush strokes won't show, I have to say in my bike customising days I sprayed cellulose paint in the cap and used that with a brush, that was soo much easier than acrylics, or maybe I've forgotten the techniques over the years since Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 29, 2016 Author Share Posted June 29, 2016 Hi all another little update. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 1, 2016 Author Share Posted July 1, 2016 Hi all another update, my customising days are obviously behind me, I used to be good at this, still the advantage is I can always respray with another job, and I'm already thinking of something Involving black and gold. Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted July 1, 2016 Share Posted July 1, 2016 Looks good to me. Hope you decide to go with it. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 2, 2016 Author Share Posted July 2, 2016 Hi all here is the next update, I really am enjoying this (I know the paint job ain't the greatest but I've not ruined the kit, the way I've painted it, it's easily over sprayed and none of it will show) this is a great kit, I was going to build this oob but I'm sorely tempted to add lots of detail, I'm just worried if I do i may end up ruining another one, I seem to be in a catch 22 at the moment, I want to do more but I'm worried if I do i will ruin it. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 5, 2016 Author Share Posted July 5, 2016 Hi all here is the next update, this has working steering, it's a very nice kit to put together. Quote Link to comment Share on other sites More sharing options...
blunc Posted July 5, 2016 Share Posted July 5, 2016 These vinyl tires large scale kits tend to have sagging/flattening issues after being on the shelf for a while. Have you put anything "inside" the tires to reduce this problem? There is also the problem of the vinyl tire material attacking/melting the wheel plastic unless a "non-styrene barrier is added. That's cool if you are not concerned with any of these issues. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 6, 2016 Author Share Posted July 6, 2016 Hi all another update on this one. Quote Link to comment Share on other sites More sharing options...
TarheelRick Posted July 7, 2016 Share Posted July 7, 2016 Really like where you are going with this one. That artwork is beautiful, I can't draw a straight line with a ruler. To answer a couple of your earlier questions about the engine: 1. yes there should be a fan on this engine, 2. If you ever crank the engine, those chrome headers will discolor. I had one of these but decided I had no place to display it and was also intimidated by the thought of how much detail it could take, so I sold it for quite a good profit. Keep those updates coming. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 7, 2016 Author Share Posted July 7, 2016 Hi all here is tonight's bit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.