StevenGuthmiller Posted June 25, 2016 Share Posted June 25, 2016 I just got back my re-plating order from the guys at Kustom Khrome & all I can say is.....WOW!! This stuff is better than the best kit chrome you've ever seen, no kidding! With all of the parts you see, I found maybe 2 indiscreet, tiny specks of dust under the chrome. Otherwise, it's as smooth and shiny as you will ever see!! The biggest complaint I've had about "Chrome Tech" as of late is their under coating. Most of the chrome I had them do years ago was absolutely beautiful, but in the past few years, they've been spraying their undercoat way too heavy, leading to a few problems with adhesion & detail hide. Price wise, it's a little more expensive than Chrome Tech, but then again, I always used to mount my own parts which is not an option with Kustom Khrome. Chrome Tech offers a mounting service as well, so when you factor in that price, it's pretty much a wash. One of the best parts is turn around. I shipped my parts on May 31st. I received my parts today, June 24th. Right around 4 weeks. I can't remember ever receiving my parts in less than 6 weeks with Chrome Tech. So, in a nut shell, if you're looking to have some parts re-plated, these are the guys to do it! Believe me, you will not be disappointed! Steve Quote Link to comment Share on other sites More sharing options...
Kris Morgan Posted June 25, 2016 Share Posted June 25, 2016 You will not find nicer guys to deal with. Quote Link to comment Share on other sites More sharing options...
Ben Posted June 25, 2016 Share Posted June 25, 2016 They mount the parts for you? How much do they charge and where are they located? Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted June 25, 2016 Share Posted June 25, 2016 I assume YOU strip it and do your parting-line removal and whatever repairs are necessary first, correct?What kind of repair material can they plate over, and what grit sanding is required in worked areas? Quote Link to comment Share on other sites More sharing options...
Ben Posted June 25, 2016 Share Posted June 25, 2016 (edited) Also, will they plate resin parts or parts with body filler? Edited June 25, 2016 by Ben Quote Link to comment Share on other sites More sharing options...
Snake45 Posted June 25, 2016 Share Posted June 25, 2016 Is it wrong that when I read this thread title, I heard it in Scarlett Johanssen's voice? Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 They mount the parts for you? How much do they charge and where are they located?Yes, they prefer to do the mounting.Prices depend on the size of the part.Bumpers are $4.00, wheel sets are $2.00 etc.I spent a little over $120.00 to chrome these parts for 9 kits. (about &13.00 per kit)They are located in New Berlin Wisconsin. I assume YOU strip it and do your parting-line removal and whatever repairs are necessary first, correct?What kind of repair material can they plate over, and what grit sanding is required in worked areas?Yes Bill, I do all of my own prep work prior to shipping, including a good washing.I had a few very small areas that needed a little filler, but they were very small.I just used "Squadron Green" in the repairs I did.They do recommend a clear coat over filler, but my repairs were so small I took a chance & was not disappointed.They recommend no sanding or filling of course, as all of these platers do, but they know you're going to do it, so they ask that you use at least 1000 grit, or buff with ultra fine steel wool. Also, will they plate resin parts or parts with body filler?Yes, they will do resin parts, but it states explicitly in their flyer that they will not guarantee results of resin parts. I had 2 resin bumpers done & I will say that they did not turn out as nicely as the rest, but they're not bad either. Steve Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 Is it wrong that when I read this thread title, I heard it in Scarlett Johanssen's voice? I guess whatever floats your boat Snake. Steve Quote Link to comment Share on other sites More sharing options...
Xingu Posted June 25, 2016 Share Posted June 25, 2016 OK, you did everything but put up a webpage and/or phone number.They look good, can't wait to see you put them to use. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 OK, you did everything but put up a webpage and/or phone number.They look good, can't wait to see you put them to use.No web page.They deal through e-mail or phone.When I started my first order, they were having issues with their e-mail accounts.Not sure if they have resolved that issue or not but you can try e-mailing Bob @ bobspaintetc@gmail.com Or Rick @ shepinski@yahoo.com But basically Bob just told me to prep the parts, pack them, include an inventory & a check & mail it to them.They would take it from there.Trying to email them for price lists & full instructions would probably be the best place to start though. Steve Quote Link to comment Share on other sites More sharing options...
High octane Posted June 25, 2016 Share Posted June 25, 2016 Bob from Bob's Paint offers Kustom Khrome and I'm happy with the pieces he had done for me recently. Lots of guys also love his paints, and Bob is a great guy to know and deal with. Quote Link to comment Share on other sites More sharing options...
Roadrunner Posted June 25, 2016 Share Posted June 25, 2016 Wow, this stuff looks excellent. I'll have to remember them. Quote Link to comment Share on other sites More sharing options...
Ben Posted June 25, 2016 Share Posted June 25, 2016 Thanks for the info Steve! I have a bunch of parts I need plated and was gun shy to send them out after I got my last batch back from The Little Motor Kar Company! Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 Thanks for the info Steve! I have a bunch of parts I need plated and was gun shy to send them out after I got my last batch back from The Little Motor Kar Company!Did you have problems with LMK?I had always heard good things about them.Never tried them though.I think you'll be very happy with Kustom Khrome.Best stuff I've seen in a long time! Steve Quote Link to comment Share on other sites More sharing options...
Snake45 Posted June 25, 2016 Share Posted June 25, 2016 I guess whatever floats your boat Snake. Steve https://www.youtube.com/watch?v=Phgh-MUlBGE Quote Link to comment Share on other sites More sharing options...
Ben Posted June 25, 2016 Share Posted June 25, 2016 Yes, I sent six full racks to them and only half the parts turned out good. Most had lots of areas with no plating, like they were rushed! Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 https://www.youtube.com/watch?v=Phgh-MUlBGEThat's hilarious!Pretty sure I saw that sketch when it was new, but I had forgotten about it. Steve Quote Link to comment Share on other sites More sharing options...
slusher Posted June 25, 2016 Share Posted June 25, 2016 https://www.youtube.com/watch?v=Phgh-MUlBGE That's funny Snake... Quote Link to comment Share on other sites More sharing options...
Snake45 Posted June 25, 2016 Share Posted June 25, 2016 That's hilarious!Pretty sure I saw that sketch when it was new, but I had forgotten about it. SteveThey've also done marble columns and chandeliers, but I couldn't find those on youtube. NBC is pretty anal about controlling their stuff. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted June 25, 2016 Author Share Posted June 25, 2016 They've also done marble columns and chandeliers, but I couldn't find those on youtube. NBC is pretty anal about controlling their stuff. Actually, the marble columns one is the one I remember! Steve Quote Link to comment Share on other sites More sharing options...
Muncie Posted June 25, 2016 Share Posted June 25, 2016 Steve, thank you for posting your parts and the information for Kustom Khrome. The parts you had plated look great - Good to know Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.