Jump to content
Model Cars Magazine Forum

37 Chevy Gasser - Hand Painted Artwork


Recommended Posts

This was my first time to try hand-painting letters and artwork directly on the body of a model car, which turns out, is a whole lot harder than drawing on a piece of paper laying flat on the table, but it was a fun experiment! I’m gonna be trying more of this on more projects soon! This is my tribute to those crazy fellas from the 50’s and 60’s who lived to drag race with whatever they could get their hands on….probably built in their Dad’s garage…the big blown souped-up motor was the most important thing. Winning on Saturday night was all they could think about all week long. And maybe safety wasn’t exactly first on their mind--just winning with the craziest fastest car out there! This is the excellent 1/25 AMT ’37 Chevy kit that comes with the option to build one of three ways, and I chose to build a mad gasser in honor of those drag racing pioneers. The body was primed with Krylon Gray Ultra-Flat primer and allowed to dry outside for about an hour while I took my oil pastel sticks and scraped 5 colors into powder with an Xacto on a piece of wax paper…Orange Rust, Yellow, Light Blue and Brown. I used cotton swabs to mix those powder colors together a bit, and then rubbed the body down to appear severely weathered, like it was finally rescued from the junkyard. I sprayed Testor’s Dullcote over the body to protect all that weathering work, and to prep for the task of hand-painting the lettering and ball-and-chain artwork -- the lettering was done with acrylic paint markers, and the ball & chain was done with the edge corners of the pastel sticks that I made the powders from earlier. Then a second coat of the dulcote to protect the artwork. The chassis was painted Krylon Red Oxide and set aside. I added a few of my own touches to the beastly 427 powerplant -- like the MOROSO valve covers, some CRAZY PIPES from a Miss Deal funny car kit, velocity stacks made from Evergreen Styrene tube, a parts-box blower, and I made the fuel pump tubing from some clear plastic bead string stuff I found at Michael’s that I painted with Tamiya Clear Yellow acrylic to appear full of gasoline - then hooked up to the kit-supplied fuel pump. The rear tires are the most excellent pad-printed M&H dragmaster piecrust slicks from AMT parts pack--the Cragars are lightly coated with Tamiya Light Gunmetal to bring the kit chrome shine down a bit. Seatbelts were made from masking tape painted the same Light Gunmetal, and P/E buckle hardware was added. Finally, I used Tamiya Weathermaster Orange rust to give the door handles and headlight bezels that neglected look like it was just dug out from years in the junkyard. I also increased the ride height in front and rear from kit specs by adding cut / stacked & painted pieces of balsa wood blocks. This was a BLAST to build! Thank you AMT.

July 2016 011.JPG

July 2016 024.JPG

July 2016 028.JPG

July 2016 035.JPG

Edited by 62 Parts
Link to comment
Share on other sites

Love the spirit of this build. Very nice weathering. My only suggestion for a future build would be to detail those velocity stacks a bit by adding the injectors at the base with fuel lines. I'm not an expert on these engines but something seems a little off about that stack/scoop set up.

Overall it looks very cool.

1d409f65efe6c005c8bd54e3e7714e58-1.jpg

Edited by modelfink
Link to comment
Share on other sites

I hear ya Travis - good point....matter of fact I can re-work this one I think.  Thank you sir!

The scoop my not reach above the hood, which always looks cool, but the motor would need to be raised to achieve that i'm afraid. Super tall stacks with out a scoop would look awesome too

Link to comment
Share on other sites

Thank you fellas - I've got a second identical kit of this car I'm gonna be doin' up with good paint and Slixx decals to go with the kit decals ...and I'm gonna dig all the way through my parts boxes and find some more goodies for this one too.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...