leafsprings Posted December 25, 2016 Share Posted December 25, 2016 (edited) Plans are to build a 3 axle gas job tractor, similar to photo, not sure what grill to use yet, '57,'58 or '59. Luckily, Frontier resins offers this style but front end needed a little reworking. Had to add plastic stock strip to front end, square out the fenders and add bottom cab corners. Specs for truck in photo: 534 V8 gas Spicer 6352 5 spd trans. Spicer 8341 4 spd aux. trans. Timken FE900 11K front axle, Eaton 38D 38K tandem 175 WB , Full Air, 10.00x20 Tires and Budd 10 Stud DIsc. Edited November 17, 2018 by leafsprings Quote Link to comment Share on other sites More sharing options...
SergeB Posted December 25, 2016 Share Posted December 25, 2016 Hey, Tommy!Very interesting project. And a very interesting track!A tank for him to be? How about a photo?What you get as a basis? From a truck frame?Good luck! Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted December 25, 2016 Share Posted December 25, 2016 Looks to be an interesting and ambitious project! Be Well Gator Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted February 11, 2017 Share Posted February 11, 2017 Nice work so far...........a great truck too! Quote Link to comment Share on other sites More sharing options...
leafsprings Posted February 12, 2017 Author Share Posted February 12, 2017 (edited) Thanks for the positive comments! These high end series Fords share many common features with diesel trucks, except they are gas powered. So I just pirated an older amt Peterbilt frame for the backbone, but a non air bag set up would be more accurate. Did a little sanding to the cab and added some evergreen strip around the fender lip. Found the main trans an auxiliary trans in resin. Edited February 12, 2017 by leafsprings Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted February 13, 2017 Share Posted February 13, 2017 Nice work !! watching this ford develop Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted February 13, 2017 Share Posted February 13, 2017 Looking good! This is one build that I would like to see more of! Quote Link to comment Share on other sites More sharing options...
Tesla Posted February 13, 2017 Share Posted February 13, 2017 The bodywork looks great! Quote Link to comment Share on other sites More sharing options...
leafsprings Posted February 19, 2018 Author Share Posted February 19, 2018 (edited) Update to the slow build. Most of the frame completed. The 2nd generation 359 frame used for mock up was replaced with a donor Louisville Dump frame, with Hendrickson suspension. 534, Spicer main and aux trans, Timken 11K front axle, 38K DP rear axles, full air and 10x20 tires and Budd wheels are in place. Dodge L 700 gas tanks used. May have to fab an air cleaner or something. Now for more body work and paint. Edited February 19, 2018 by leafsprings Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted February 19, 2018 Share Posted February 19, 2018 That's a great looking truck Quote Link to comment Share on other sites More sharing options...
landman Posted February 19, 2018 Share Posted February 19, 2018 Very nice Tommy. in the early pictures the hood appears to be a different color and texture. was it part of the Frontier item? Quote Link to comment Share on other sites More sharing options...
Mercuryman54 Posted February 20, 2018 Share Posted February 20, 2018 Love the 57-60 Ford trucks! Dennis Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted February 24, 2018 Share Posted February 24, 2018 Looking good ! Be Well Gator Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted February 24, 2018 Share Posted February 24, 2018 Nice build I’ve always wanted to see one of these old Fords from Frontier built. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted February 24, 2018 Share Posted February 24, 2018 Fine looking progress. I love old heavy trucks (though I know very little about them), so this is a real treat for me to see come together. Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted February 25, 2018 Share Posted February 25, 2018 Glad to see this project back again! Great work! Looking forward to seeing more!! Quote Link to comment Share on other sites More sharing options...
leafsprings Posted February 26, 2018 Author Share Posted February 26, 2018 On 2/19/2018 at 3:24 PM, landman said: Very nice Tommy. in the early pictures the hood appears to be a different color and texture. was it part of the Frontier item? Yes, same hood that came with kit, only difference is the primer. Will fabricate side hood emblem spears and front emblem with bare metal foil Quote Link to comment Share on other sites More sharing options...
leafsprings Posted February 26, 2018 Author Share Posted February 26, 2018 (edited) These trucks came with a hood scoop that connected to the air cleaner via air duct. Tried to duplicate the real one from factory photo. May just end up being a dump since its already on a Louisville dump frame. Edited April 28, 2018 by leafsprings Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted March 6, 2018 Share Posted March 6, 2018 Looks awesome, gonna check in on this one. Quote Link to comment Share on other sites More sharing options...
Sergey Posted March 22, 2018 Share Posted March 22, 2018 (edited) Nice work! I love this model too! I guess hood lid needs some more work to minimise the gaps. Have you bended it in hot water for leveling (I saw some Frontier resin)? Though upper panel lines looks not parallel anyway. May be the better way is to sand them off and make your own one? Edited March 22, 2018 by Sergey Quote Link to comment Share on other sites More sharing options...
leafsprings Posted March 25, 2018 Author Share Posted March 25, 2018 The real reason its taking so long, the body literally needs a lot of work. I would say its not a crisp casting, it was rather rough and lacks some detail. The front fenders had to be re shaped and the hood was a bad fit. However, it is getting closer. The hoods lower front lip was flat, had to be beveled upward and side hood body line had to be cleaned up. These are small details that most people may not notice, unless they compare to a photograph of the real thing. Next is working on the grill. Quote Link to comment Share on other sites More sharing options...
leafsprings Posted July 8, 2018 Author Share Posted July 8, 2018 (edited) Grill just about done, decided to go with the '59-'60 grill, needed a little reworking from what came with kit. Cab is now in primer sealer. Edited November 3, 2018 by leafsprings Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted July 9, 2018 Share Posted July 9, 2018 Glad to see this one again! Looks great! Quote Link to comment Share on other sites More sharing options...
Pete68 Posted July 9, 2018 Share Posted July 9, 2018 Always like these big job fords Quote Link to comment Share on other sites More sharing options...
leafsprings Posted November 3, 2018 Author Share Posted November 3, 2018 (edited) Construction yellow paint finally on cab, grill and bumper off white. Interior just about done Edited November 4, 2018 by leafsprings Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.