peekay Posted January 12, 2017 Share Posted January 12, 2017 Thanks Peter. BTW, if the New Zealander is looking for Old Zealand, he's nearly there; it's farther north near Denmark. David G. Yes, Zealand is a Danish island. But New Zealand was originally named by the dutch explorer Abel Tasman after Zeeland, a province of Holland. Captain Cook later anglicised it to New Zealand. I wish it was still called Aotearoa, as the Maori people called it for hundreds of years before europeans "discovered" it. Aotearoa means "land of the long white cloud". Quote Link to comment Share on other sites More sharing options...
David G. Posted January 12, 2017 Author Share Posted January 12, 2017 Yes, Zealand is a Danish island. But New Zealand was originally named by the dutch explorer Abel Tasman after Zeeland, a province of Holland. Captain Cook later anglicised it to New Zealand. I wish it was still called Aotearoa, as the Maori people called it for hundreds of years before europeans "discovered" it. Aotearoa means "land of the long white cloud". Wow, thanks for the clarification. David G. Quote Link to comment Share on other sites More sharing options...
Dann Tier Posted January 13, 2017 Share Posted January 13, 2017 Totally looks real!!!!, outstanding job!! -still looks VERY tough in stock form! Quote Link to comment Share on other sites More sharing options...
David G. Posted January 13, 2017 Author Share Posted January 13, 2017 Totally looks real!!!!, outstanding job!! -still looks VERY tough in stock form!Thank you Dann.David G. Quote Link to comment Share on other sites More sharing options...
David G. Posted January 15, 2017 Author Share Posted January 15, 2017 (edited) I meant to send out a special thanks to Paul Gardner who was nice enough to send me a replacement steering wheel for this model when mine went missing. I couldn't have finished this without you Paul. Thanks. By the way, I was cleaning up my paint area after I finished finished the build and something caught my eye. I looked down and on the floor in front of my right foot. Laying there, as if placed intentionally for my discovery, was this- The only thing I can imagine is that somehow it became stuck to the tarp that I cover my paint bench with. The same tarp that I removed and replaced at least ten times during the building of this kit. Then when everything is done and I'm cleaning up for the final time on this project... Bing! Like magic it appears. Gotta Love it! Thanks again Paul, David G. Edited October 1, 2021 by David G. Photo Restored Quote Link to comment Share on other sites More sharing options...
Janne Herajärvi Posted January 15, 2017 Share Posted January 15, 2017 WoW, shiny.. Me likes.. Quote Link to comment Share on other sites More sharing options...
High octane Posted January 15, 2017 Share Posted January 15, 2017 Great job on that Plymouth David, and excellent photos too! I just love dem Mopars! Quote Link to comment Share on other sites More sharing options...
David G. Posted January 16, 2017 Author Share Posted January 16, 2017 WoW, shiny.. Me likes.. Thanks Janne, I'm glad you like it. Great job on that Plymouth David, and excellent photos too! I just love dem Mopars! Thank you Nick, I'm very happy with the way the paint turned out on this one. David G. Quote Link to comment Share on other sites More sharing options...
geetee66 Posted January 16, 2017 Share Posted January 16, 2017 Super buildvery crisp and clean Quote Link to comment Share on other sites More sharing options...
David G. Posted January 17, 2017 Author Share Posted January 17, 2017 Super buildvery crisp and clean Thank you Guy.David G. Quote Link to comment Share on other sites More sharing options...
David G. Posted July 18, 2021 Author Share Posted July 18, 2021 I've gone in and reedited the old photos to hopefully make them a bit more eye friendly and uploaded them to the topic once again. This should be the last time I have to rescue this topic from the PhotoBucket Monster. Regards, David G. Quote Link to comment Share on other sites More sharing options...
espo Posted July 18, 2021 Share Posted July 18, 2021 Nice to see this one again. I always liked how you made such a nice stock looking model and again the front end that seems to be the big stumbling block on this one. Quote Link to comment Share on other sites More sharing options...
David G. Posted July 19, 2021 Author Share Posted July 19, 2021 21 hours ago, espo said: Nice to see this one again. I always liked how you made such a nice stock looking model and again the front end that seems to be the big stumbling block on this one. Thanks David, knowing your level and quality of work, that means a lot to me. The way AMT chose to divide the mold does create a challenge and is a prime example of the age-old conflict between designers and engineers. Every design feature on the car draws the eye to the front end as the main design feature. To the automotive designer, it's like the prow of a ship with angel wings. The kit engineer sees it as a great place to split the mold. I think leaving the front apron in tact and dividing the mold by casting the front fenders separately would have been a better choice. But I'm a funeral director not a model kit engineer. Thanks again, David G. Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 29, 2021 Share Posted September 29, 2021 Nice pics Dave. Just bought this kit. It has a nice looking front grille. Can't remember what automaker said, "when you see our cars coming down the street you'll know who made it by the front grille." Big grilles and Big fins were the thing back in the day. Quote Link to comment Share on other sites More sharing options...
carbuilder1950 Posted September 29, 2021 Share Posted September 29, 2021 What a beautiful, cleanly built car. Your paint and foil work are immaculate. Yes, as someone here said earlier, WE NEED MORE STOCKERS. Quote Link to comment Share on other sites More sharing options...
David G. Posted September 30, 2021 Author Share Posted September 30, 2021 22 hours ago, Zippi said: Nice pics Dave. Just bought this kit. It has a nice looking front grille. Can't remember what automaker said, "when you see our cars coming down the street you'll know who made it by the front grille." Big grilles and Big fins were the thing back in the day. Thank you Bob. Just a head's up, this kit did give me a little trouble when it came to fitting the body and chassis together. As I remember, I could get either the front or rear of the body to settle completely over the chassis but not both at the same time. I chose the front and left the rear of the body up off the chassis by about 2mm. I never did figure out why it wouldn't sit all the way down, maybe you'll have better luck with that. I also had to do a bit of body work to blend the front panel into the body. Other than those two points, it's a great kit and I had a lot of fun building it. You may have seen it already but here is a link to the WIP I posted for this model. It may come in handy when the time comes to build yours. I do remember the Edsel slogan, "The thrill starts with the grille. And never seems to end." 18 hours ago, carbuilder1950 said: What a beautiful, cleanly built car. Your paint and foil work are immaculate. Yes, as someone here said earlier, WE NEED MORE STOCKERS. Thank you David, it's kind of you to take the time to say so. I build stock whenever I can, just the way God and Detroit meant them. David G. 1 Quote Link to comment Share on other sites More sharing options...
misterNNL Posted September 30, 2021 Share Posted September 30, 2021 I have often wondered how that front end would look if the grille was turned down-side-up.🤔 Quote Link to comment Share on other sites More sharing options...
Zippi Posted September 30, 2021 Share Posted September 30, 2021 Whenever I get around to building mine it will be stock. Quote Link to comment Share on other sites More sharing options...
David G. Posted October 1, 2021 Author Share Posted October 1, 2021 19 hours ago, misterNNL said: I have often wondered how that front end would look if the grille was turned down-side-up.🤔 Which one, the Edsel or the Plymouth? 18 hours ago, Zippi said: Whenever I get around to building mine it will be stock. I look forward to seeing it Bob. David G. Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted October 1, 2021 Share Posted October 1, 2021 Very nice build, David - I can't remember if I ever saw this model built stock. Quote Link to comment Share on other sites More sharing options...
David G. Posted October 1, 2021 Author Share Posted October 1, 2021 24 minutes ago, 1959scudetto said: Very nice build, David - I can't remember if I ever saw this model built stock. Thank you Helmut. This car has such a beautiful design that I thought it best to build it stock. David G. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted October 2, 2021 Share Posted October 2, 2021 14 hours ago, David G. said: Which one, the Edsel or the Plymouth? I look forward to seeing it Bob. David G. My intended grille inversion would be on the Plymouth. The Edsel's grille was and still is IMO butt ugly. Quote Link to comment Share on other sites More sharing options...
Dominik Posted October 2, 2021 Share Posted October 2, 2021 On 1/11/2017 at 5:58 AM, StevenGuthmiller said: Terrific! We don't see nearly enough of these built stock. Steve What Steve said. Exactly. Quote Link to comment Share on other sites More sharing options...
David G. Posted October 2, 2021 Author Share Posted October 2, 2021 10 hours ago, misterNNL said: My intended grille inversion would be on the Plymouth. The Edsel's grille was and still is IMO butt ugly. That would be an interesting project Tom. Well, I've always liked Edsels, I even built one. Until recently, I had no idea how much of a hot-button topic this car could be with some folks. During the time I was building the one pictured above, I was chatting with one of the associates at my LHS and and mentioned what I was working on. Another customer overheard the conversation and glared at me as he growled "Why in God's name would you do that?!" This man seemed really upset, like he wanted to punch me or something. "I'm sorry....?" I asked in puzzlement. "Build one of those... those things?!" "Um, it's just a model kit." I answered. The man appeared to be so upset that one would think Edsel Ford had personally beat up and robbed his grandmother or something. He harrumphed and stomped away leaving the sales associate and me thoroughly puzzled. I'm not saying I read your response in that way Tom, it's just the firmness of your opinion that reminded me of the event. 4 hours ago, Dominik said: What Steve said. Exactly. Thank you Dominik. Regards, David G. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted October 2, 2021 Share Posted October 2, 2021 3 hours ago, David G. said: That would be an interesting project Tom. Well, I've always liked Edsels, I even built one. Until recently, I had no idea how much of a hot-button topic this car could be with some folks. During the time I was building the one pictured above, I was chatting with one of the associates at my LHS and and mentioned what I was working on. Another customer overheard the conversation and glared at me as he growled "Why in God's name would you do that?!" This man seemed really upset, like he wanted to punch me or something. "I'm sorry....?" I asked in puzzlement. "Build one of those... those things?!" "Um, it's just a model kit." I answered. The man appeared to be so upset that one would think Edsel Ford had personally beat up and robbed his grandmother or something. He harrumphed and stomped away leaving the sales associate and me thoroughly puzzled. I'm not saying I read your response in that way Tom, it's just the firmness of your opinion that reminded me of the event. Thank you Dominik. Regards, David G. Actually one of the girls in my class in high school drove a brand new '59 Edsel to school some times and it was maybe too different for my blue bowtie tastes. Her dad worked for an area Ford dealer. In the this period only the "rich" kids ever drove to school. We all rode the school bus. Those years I personality the Chevy designs. No glaring or malicious intent in my statement was intended. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.