Art Anderson Posted April 24, 2017 Share Posted April 24, 2017 I spent quite a bit of time chatting with Tapani and Juha Airio of Airtrax, who flew all the way from Helsinki Finland with a couple of trunk loads of goodies--this one REALLY grabbed my attention on the Factory Stock table at NNL-East: 1941 Lincoln Zephyr Coupe! They had just the one builtup on display (I placed my paid order at their table!), and frankly, I think it's plum gorgeous! (Fits the Monogram '41 Lincoln Continental kt) ARt Quote Link to comment Share on other sites More sharing options...
misterNNL Posted April 24, 2017 Share Posted April 24, 2017 Thanks Art!Very slick and beautifully built. Quote Link to comment Share on other sites More sharing options...
mike 51 Posted April 24, 2017 Share Posted April 24, 2017 (edited) I saw one of those bodies this weekend....the conversion is well done for the most part.. but it is a very thick casting and wil require quite a bit of work to look as nice as the one pictured.A friend of mine is "fixing" it thinning the inside of the roof, filling sinks in the body sides and redoing the window openings/frames. Perhaps a new casting could be made to save others all that work.The proportions are nearly perfect so it's well worth fixing the few short comings... Edited April 25, 2017 by mike 51 Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted April 25, 2017 Share Posted April 25, 2017 How about that Aston Martin DBS is in the background? Is that a Juha Ario scratch built also? Quote Link to comment Share on other sites More sharing options...
socal76 Posted April 25, 2017 Share Posted April 25, 2017 Art, are the side skirts molded on or separate? I am not really a fan of the skirts on many car bodies. Quote Link to comment Share on other sites More sharing options...
Art Anderson Posted April 25, 2017 Author Share Posted April 25, 2017 Art, are the side skirts molded on or separate? I am not really a fan of the skirts on many car bodies.Like the Continental, those Lincoln Zephyrs were (and still are) almost NEVER seen without fender skirts.Art Quote Link to comment Share on other sites More sharing options...
dimaxion Posted April 25, 2017 Share Posted April 25, 2017 All I can say is wow ! Beautiful .. Thanx .. Quote Link to comment Share on other sites More sharing options...
W-409 Posted April 25, 2017 Share Posted April 25, 2017 Wow, I've seen that build at a local Model Car Show around here and I was quietly hoping that some day we'll see a resin kit of this! Now this is some great news! Usually AirTrax is selling some damaged bodies at local show in side of selling the complete kits, so if I see a Lincoln body in there I'll be sure to buy one. I see a Lead Sled coming... Quote Link to comment Share on other sites More sharing options...
ChrisBcritter Posted April 26, 2017 Share Posted April 26, 2017 Nice work (I agree the windows need a little finessing) - and Monogram should have done this long ago. Quote Link to comment Share on other sites More sharing options...
dublin boy Posted April 26, 2017 Share Posted April 26, 2017 Looks gorgeous, but what's the story on the Aston DBS? Quote Link to comment Share on other sites More sharing options...
Tumbe Posted April 27, 2017 Share Posted April 27, 2017 (edited) Aston-Martin DBS is also Air-Trax kit mastered and build by Tapani Rauramo as is the Lincoln Zephyr. Edited April 27, 2017 by Tumbe Quote Link to comment Share on other sites More sharing options...
Zoom Zoom Posted April 27, 2017 Share Posted April 27, 2017 I almost sprung for the Air-Trax Renault Fuego! The model has to be better than the real car, right? Decided the budget had been already blown to smithereens earlier in the day... Quote Link to comment Share on other sites More sharing options...
dublin boy Posted April 28, 2017 Share Posted April 28, 2017 (edited) Thanks for the information Tuomas. Edited April 28, 2017 by dublin boy Quote Link to comment Share on other sites More sharing options...
Eshaver Posted April 28, 2017 Share Posted April 28, 2017 I dunno bout y'all but Monogram's 1941 Lincoln has become sorta hard to find .... I would like to do one of these as coupes and sedans were much more prevalent than a convertible during this era . Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted April 28, 2017 Share Posted April 28, 2017 I have one Air-Trax kit in my resin stash, the '69 Mercury Marauder X-100...pretty sweet, lots of parts and detail. They make nice stuff. Quote Link to comment Share on other sites More sharing options...
djflyer Posted May 9, 2017 Share Posted May 9, 2017 I can hear my wallet emptying. Where can I find AirTrax and order somethings? Quote Link to comment Share on other sites More sharing options...
Eric Macleod Posted May 9, 2017 Share Posted May 9, 2017 I have had one of these for about 5-7 years. Never got it finished so I need to dust it off and get it doine.l wonder, did the just clean up Bill Atchinson's tribute car or start over from scratch? Quote Link to comment Share on other sites More sharing options...
KevinMoparFord Posted May 9, 2017 Share Posted May 9, 2017 I can hear my wallet emptying. Where can I find AirTrax and order somethings? email raurata@yahoo.com Quote Link to comment Share on other sites More sharing options...
PhilX Posted May 10, 2017 Share Posted May 10, 2017 You say that Airtrax 1941 Lincoln Zephyr Coupe fits the Monogram '41 Lincoln Continental kit.I'm surprised because I thought the Continental wheelbase was longer than the Zephyr wheelbase.So, how can it fit ?Or perhaps, am I wrong ? Quote Link to comment Share on other sites More sharing options...
Tapani Posted May 10, 2017 Share Posted May 10, 2017 You say that Airtrax 1941 Lincoln Zephyr Coupe fits the Monogram '41 Lincoln Continental kit. I'm surprised because I thought the Continental wheelbase was longer than the Zephyr wheelbase. So, how can it fit ? Or perhaps, am I wrong ? Maybe you are wrong PhilX... 1941 Continental 125in, 1941 Zephyr 125in. The first generation Zephyr may have had 3in shorter wb, but as the Conti was based on Zephyr, they used the same chassis. However, you are not totally wrong, because the Conti had longer hood and front fenders. It also was lower, achieved by slicing a piece away at waist line. So, they also moved the windshield back, lowered the seats and used the same steering wheel shaft, that automatically moved rearwards, as it was tilted into a lower angle. This is what I reckon they did anyway to achieve the "Mustangesque" proportions nearly 25 years before Mustang. Quote Link to comment Share on other sites More sharing options...
Tapani Posted May 10, 2017 Share Posted May 10, 2017 I dunno bout y'all but Monogram's 1941 Lincoln has become sorta hard to find .... I would like to do one of these as coupes and sedans were much more prevalent than a convertible during this era . Don't you all have a couple of unbuilt or kid built Monogram Continentals in the closet? Quote Link to comment Share on other sites More sharing options...
Tapani Posted May 10, 2017 Share Posted May 10, 2017 I saw one of those bodies this weekend....the conversion is well done for the most part.. but it is a very thick casting and wil require quite a bit of work to look as nice as the one pictured.A friend of mine is "fixing" it thinning the inside of the roof, filling sinks in the body sides and redoing the window openings/frames. Perhaps a new casting could be made to save others all that work.The proportions are nearly perfect so it's well worth fixing the few short comings... The thick part of the casting will be hidden in the trunk... I didn't make it any thinner in my build. It's hiding in there... I admit, I can't cast Lego-style click-click-quality stuff, but I am trying my best. And is that even the idea, really? Must leave something for the builder to fix to keep it interesting, huh? Anyway, Thank you all for your nice comments! Quote Link to comment Share on other sites More sharing options...
PhilX Posted May 10, 2017 Share Posted May 10, 2017 Maybe you are wrong PhilX... 1941 Continental 125in, 1941 Zephyr 125in. The first generation Zephyr may have had 3in shorter wb, but as the Conti was based on Zephyr, they used the same chassis. However, you are not totally wrong, because the Conti had longer hood and front fenders. It also was lower, achieved by slicing a piece away at waist line. So, they also moved the windshield back, lowered the seats and used the same steering wheel shaft, that automatically moved rearwards, as it was tilted into a lower angle. This is what I reckon they did anyway to achieve the "Mustangesque" proportions nearly 25 years before Mustang. Thank you for these very clear explanations Tapani. As I have an unbuilt Continental kit, perhaps I will buy the Zephyr body if available. Another question : wich car is it on the left of the second picture (dark red roadster) ? Quote Link to comment Share on other sites More sharing options...
JTalmage Posted May 10, 2017 Share Posted May 10, 2017 Yep.... I WANT ONE! Quote Link to comment Share on other sites More sharing options...
stevez Posted May 19, 2017 Share Posted May 19, 2017 would the much better revel/mono '40 ford be a donor for the zephyr ??? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.