Jump to content
Model Cars Magazine Forum

1/16 scale paint question


Recommended Posts

Greetings,

I have a goal of doing one of those miles deep black paint jobs on a 1/16 scale kit and was wondering about opinions on whether to use airbrush or spray can. My thinking is with the spray can the coverage would be more consistent on this scale. Would love to know opinions.

Thanks,

Russ

Link to comment
Share on other sites

Getting a "miles deep" black paint job really isn't dependent on the spray medium you use.

Rattlecans or an airbrush or an automotive touchup gun or even a full-scale spray gun (with a 1.4 tip, the material turned way down, and a narrow fan) can all produce outstanding results.

The bad rap black has is due in large part to a simple misunderstanding. Black is actually rather an easy color to shoot, and usually covers very well.

BUT...because a slick black paint job is as reflective as a mirror, it WILL show every slight wave or divot or minor surface imperfection, and orange peel really stands out.

To get a "miles deep" black job, you need to remember these things:

1) Get your bodywork PERFECT. 

2) After you shoot your paint, at least 3 coats and probably better 5, you're going to need to "colorsand" the paint with progressively finer and finer grit papers (I go up to 12,000), and then polish very carefully.

3) Straight black lacquer (Duplicolor sprays really nice straight out of the can and covers VERY well), sanded and polished correctly, will be spectacular. BUT...if you want it to look even deeper, colorsand with 600 to get the last coat dead smooth, and top it off with 3 or more coats of clear. Sand and polish that, and you have a show-winner (if you do it right).

Link to comment
Share on other sites

As with any type of finish, be it a paint job, a chrome plating job, bluing or nickel plating on a firearm, or the refinishing of a fine piece of furniture, the actual application of the finish is secondary to the results. It is the preparation UNDER that finish that is number 1, 2 AND 3 in importance. As Bill said above, once you have PERFECT bodywork, then you can proceed from there, and he nails it perfectly.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...