502 Posted February 2, 2018 Author Share Posted February 2, 2018 Still plugging away at this rearend. I’m using the tires from the monogram 41 lincoln. Instead of grafting centers into the stock wheels I decided to add a strip to the wheels from the revell 29 roadster. They fit pretty good aside from a gap on the back side so I made a plate to cover it. I then made some mounts for the spring on my quick change. I’m using the spring and cross member from the amt mod rod. Quote Link to comment Share on other sites More sharing options...
Dogfish_7 Posted February 2, 2018 Share Posted February 2, 2018 Lovin this build. Quote Link to comment Share on other sites More sharing options...
modelfink Posted February 2, 2018 Share Posted February 2, 2018 Very cool. That's a good tip regarding the Lincoln tires and wheels from the Revell 29. Nice spring hangers too. The tweedy Pie kit has some nice spring hangers too. Quote Link to comment Share on other sites More sharing options...
502 Posted March 22, 2018 Author Share Posted March 22, 2018 (edited) I made a more stock appearing floor pan for the rear. I wanted to add some detail to it but I tried a couple things on a test panel and nothing really turned out quite like I wanted. I decided to use the olds rocket motor so I went ahead and made some engine mounts for it. Edited March 22, 2018 by 502 Quote Link to comment Share on other sites More sharing options...
502 Posted March 23, 2018 Author Share Posted March 23, 2018 (edited) I think all the body work is done, I need to shoot another coat of primer but I believe it’s good to go. This is the final ride height as well. I’m gonna start on the front sheet metal tomorrow. Also added the cowl vent. Edited March 23, 2018 by 502 Quote Link to comment Share on other sites More sharing options...
alan barton Posted March 23, 2018 Share Posted March 23, 2018 I'm really enjoying your methodical approach to the design of this coupe Justin. It will probably look so good in primer that you won't want to paint it! I know that a lot of people are going for track noses on 32 and 34 coupes these days but in my opinion you did the right thing leaving the 32 grille on it. I have a decent collection of really old rod magazines and frankly, most of them ran stock or filled grilles rather than full custom efforts. I think you are on the money with this one. I do admire your craftsmanship on the window reveals after your chop. I have quite a few unfinished chops on the bench simply because I can't seem to achieve the neatness around those mouldings that you display here Cheers Alan Quote Link to comment Share on other sites More sharing options...
Spex84 Posted March 23, 2018 Share Posted March 23, 2018 Nicely done with the '29 wheels adapted to the '41 Lincoln tires! I'm liking those engine mounts too. Quote Link to comment Share on other sites More sharing options...
502 Posted March 23, 2018 Author Share Posted March 23, 2018 Thanks for the comments guys. I started on the hood sides today and I have to say it really helped the looked of this car in my opinion. Quote Link to comment Share on other sites More sharing options...
afx Posted March 23, 2018 Share Posted March 23, 2018 Impressive work thus far. Quote Link to comment Share on other sites More sharing options...
502 Posted March 26, 2018 Author Share Posted March 26, 2018 I added a small strip to the bottom of the hood side. That body line just flows so much better now. Quote Link to comment Share on other sites More sharing options...
502 Posted April 2, 2018 Author Share Posted April 2, 2018 Couldn’t bring myself to use the stock k member so I built a new one. Quote Link to comment Share on other sites More sharing options...
502 Posted June 13, 2018 Author Share Posted June 13, 2018 Back on the bench with this one. Hoping to finish it up for a show next month. Let me tell ya, wiring up this rocket motor was a massive headache! I think it was worth the work though. Quote Link to comment Share on other sites More sharing options...
Spex84 Posted June 13, 2018 Share Posted June 13, 2018 Loving the updates! The new hood side flow is perfect, and the Olds looks killer in the engine bay. Nice wiring job. I like the new '40-style X-member and the spring hangars too. Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted June 13, 2018 Share Posted June 13, 2018 Glad to see this one back on your bench. The Olds looks great, wiring it is definitely worth it with the unique way the wires run through that loom on the real ones, you pulled it off here Quote Link to comment Share on other sites More sharing options...
tim boyd Posted June 15, 2018 Share Posted June 15, 2018 Justin: Sharp, sharp, sharp! Good luck and best wishes bringing this one home! TIM Quote Link to comment Share on other sites More sharing options...
502 Posted June 17, 2018 Author Share Posted June 17, 2018 (edited) Thanks for the comments. I was hoping to have the body work finished up but ran into a few small issues. I sprayed some krylon primer and it seems to have had a bad reaction with the plastic or something. The surface was smooth as glass but after spraying it bubbled up. Edit: after looking at it some more I took my exacto and barely scraped the surface. The flaw only exist on the surface of the paint. Anyone have any info on this? I’m going to try a different paint. Edited June 17, 2018 by 502 Quote Link to comment Share on other sites More sharing options...
gman Posted June 17, 2018 Share Posted June 17, 2018 3 hours ago, 502 said: Thanks for the comments. I was hoping to have the body work finished up but ran into a few small issues. I sprayed some krylon primer and it seems to have had a bad reaction with the plastic or something. The surface was smooth as glass but after spraying it bubbled up. Edit: after looking at it some more I took my exacto and barely scraped the surface. The flaw only exist on the surface of the paint. Anyone have any info on this? I’m going to try a different paint. The solvents in the last coat probably got into the previous coats just enough to lift them where your bodywork is. It can happen with lacquer primers and color coats as the solvent in the last coat tries to melt into and chemically bond with the previous coats. Knock what you can down with sandpaper around the edges, and try to use something like Comet Cleanser on a toothbrush- this should level the surface enough to re-primer without detracting from the louvers. Depending on what you plan to use for top coat, you may be able to get Tamiya Fine Surface primer to lay down over top of previous coats without raising and ghosting the bodywork again...I wouldn't do it unless you are using a relatively "cool" paint as a color coat, but it is really good stuff. If the plan is to use automotive lacquer for final color, decanting the Krylon (or other automotive) primer into an air brush and building up light mist coats with lots of flash time between coats will help. Quote Link to comment Share on other sites More sharing options...
Spex84 Posted June 17, 2018 Share Posted June 17, 2018 I've been having problems with Krylon doing this for the last year and a half or so. It seems to be much "hotter" than it used to be, so I can no longer lay wet coats straight from a spray can without it wrinkling the plastic or primer underneath. Quote Link to comment Share on other sites More sharing options...
dino246gt Posted June 18, 2018 Share Posted June 18, 2018 Cool hot rod, love all the mods! Quote Link to comment Share on other sites More sharing options...
502 Posted June 20, 2018 Author Share Posted June 20, 2018 I’ve finished the suspension but still need to build the cowl steering setup. As soon as I finish that, the frame should be ready for paint. The radius rods for the rear aren’t quite what I wanted. Ideally I’d like them to sit a little further to the outside of the axle. I just modified the stock ones from the kit and that’s what I ended up with. It’ll work fine for this build, the exhaust will exit out the side so no clearance issues to worry about there. Quote Link to comment Share on other sites More sharing options...
geewhiz Posted June 20, 2018 Share Posted June 20, 2018 Sweet hot rod, Justin!!! The craftsmanship in this car is awesome and it shows in such a very perfect looking deuce!!! Looking forward to seeing more and good luck at the show with it!!!????????? Quote Link to comment Share on other sites More sharing options...
502 Posted June 20, 2018 Author Share Posted June 20, 2018 Most of the steering components are done, I still have a few little things to do once I start assembly. Quote Link to comment Share on other sites More sharing options...
502 Posted July 1, 2018 Author Share Posted July 1, 2018 Cleaned the desk up, now we’re ready for paint and assembly. Quote Link to comment Share on other sites More sharing options...
misterNNL Posted July 2, 2018 Share Posted July 2, 2018 Outstanding work. The suspension finishes are spot on. Looking forward to more updates. Quote Link to comment Share on other sites More sharing options...
502 Posted July 3, 2018 Author Share Posted July 3, 2018 The painting continues! I’ve decided to name this car “Hell’s Belle” after a b24 bomber from WWII. It was part of the 494th bombing group so this car will be numbered 494c. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.