W-409 Posted October 31, 2017 Share Posted October 31, 2017 After a long break I finally sat down on my workbench and did something with model cars! Last spring and summer went pretty much with Drag Racing our Stock Eliminator car, plus that now in the autumn I've been busy in the garage with my 1:1 '62 Chevy II. But now I felt like I wanted to work with plastic a bit, and instead of continuing older projects I decided to start a new one which might be a bit easier, Monogram's 1/32 scale '78 Malibu. The kit doesn't have too many parts, but the few parts that are attached to the parts trees are actually surprisingly good. Even the body looks great even though grill, lights and that kind of parts are molded as one piece to the body... It was clear right away when I got this kit that I'm not building it as a Cop Car. Since several of these G-Body Malibus were sold as new here in Finland, I want to build this to look like something that could have been cruising on Finnish roads when it was new. And because the American Cars around here back then were usually pretty poor models (four door, small engine and very few options), the 4D Sedan body style is actually a good thing. First thing was to fill the holes from kit's roof. They were meant for the emergency lights. Also those "high spots" or whatever they're called right next to the drip rail had to be removed as well... Next step was the wheels and tires. Kit comes GM steel wheels and Good Year tires with raised letters. Those raised letters just didn't fit to the original look, so I sanded them away. But then I noticed a set of AirTrax resin wheels and tires that looked just right size for this Malibu. Also those wheels were the basic steel wheels that I'm a huge fan of... So I decided to go with those instead. But how to make those AirTrax wheels fit to the kit axles? Well, I cut the piece where kit axle goes in from the original kit wheels and glued that piece to backside of the AirTrax wheel... Simple. And then the seats... I wanted to have a bench seat, but the kit comes with buckets... Well, I cut the center console away and made a rough basis for the 3rd person to sit in. I guess the final shape will be done with Bondo and sanding... Quote Link to comment Share on other sites More sharing options...
R. Thorne Posted October 31, 2017 Share Posted October 31, 2017 Welcome back, Niko. I always enjoy your builds. Quote Link to comment Share on other sites More sharing options...
1972coronet Posted November 1, 2017 Share Posted November 1, 2017 I really , REALLY wish that those GM A/G ( A-Special ? G-Special ? ) were done in 25th scale .Certainly , I'm not alone in this .As many of those as I built as a kid , this is the first time that I can recall seeing the Mount Prospect 'P1' livery ! Wonder if Monogram was capitalising on the Blues Brothers ? Quote Link to comment Share on other sites More sharing options...
W-409 Posted November 9, 2017 Author Share Posted November 9, 2017 Thanks, I appreciate the kind words! And I'd definitely like to have this G-Body Malibu in 1/25. I'd find use for several of them immediately as this body style has potential for several different builds... And if for example '78 Malibu was done as a kit, it wouldn't be tricky to modify into other G-Body models either (Resin Transkits?)... Anyway, the bench seat is slowly coming together. I had to build a rear "wall" for the seat from sheet styrene. Then I started smoothing everything out with putty. Usually I've used the same putty that I use on 1:1 cars, but because this part is a bit tricky to sand smooth, I used Green Putty this time as it's much easier to sand. I'm sure there are still some minor sanding required, but probably I'll shoot a coat of primer next to see how much more work it needs... Quote Link to comment Share on other sites More sharing options...
W-409 Posted November 27, 2017 Author Share Posted November 27, 2017 Something minor has happened since my last update, the front seat was sprayed with a coat of filler spray to smooth out all of those minor flaws at once. Then after a bit of sanding I brush painted it with a Humbrol color. Not perfect, but good enough to be hidden inside the car... Some filler was also applied to the roof as well. And at the same time I also removed the spotlight hole from driver's door and smoothed that out with putty. And the chassis was painted too. Everything is done with a brush and that required some very careful painting in some areas (And some trial and error!) as everything was molded as one piece. But luckily it turned out decent in the end. Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted November 27, 2017 Share Posted November 27, 2017 Nice job, I have never seen one of these done. So far pretty awesome work, keep it going now I want to see it done. Quote Link to comment Share on other sites More sharing options...
W-409 Posted December 11, 2017 Author Share Posted December 11, 2017 Thanks Dan! I haven't seen any of these built either, so I have no clue either how this kit looks when it's done. After a bit of sanding and scribing the panel lines a bit deeper the body was ready to be shot with Primer. But before that I had to mask off the molded in grille and tail lights, as otherwise some of the molded in details could be hidden under paint. My plan is to BMF those when the body is painted, clear coated and polished... After the first coat of Primer the body looked surprisingly good. Usually at this point I find a couple of small errors that need to be fixed before painting, but it looks like this time I can spray some color on it next. And last here's a picture of the interior tub that got some color on it as well. The floor is Revell's Flat Black and backseat and door panels are painted with the same stuff as I used with the front seat. Of course I need to add some details to the door panels before I can install anything on place... Quote Link to comment Share on other sites More sharing options...
Reuhkapelti Posted December 11, 2017 Share Posted December 11, 2017 Great to see progress on this Malibu again. It's gonna look so sharp when finished. Thanks for the info regarding the FCMA forum, I noticed that new address too, but this morning though. Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted December 11, 2017 Share Posted December 11, 2017 Very cool indeed !!! Quote Link to comment Share on other sites More sharing options...
W-409 Posted December 12, 2017 Author Share Posted December 12, 2017 Thanks Gents! The first attempt at painting the body didn't turn out quite as good as I hoped. It's not a disaster, but I guess somehow the paint reacted with the primer creating a horrible looking finish. I'm hoping that once I let it dry for a few days, light sanding and repainting would fix it... The body looks better in the pictures than it really is, if it was that good I wouldn't have to repaint it. Quote Link to comment Share on other sites More sharing options...
randyc Posted December 12, 2017 Share Posted December 12, 2017 LIke it! Nice. Quote Link to comment Share on other sites More sharing options...
W-409 Posted December 18, 2017 Author Share Posted December 18, 2017 Thanks Randy! I'm happy to say that I got the paint job fixed. After it was completely dry, I sanded it with 1,000 grit hoping that I won't go through the paint as then I would have to start all over again. Luckily that didn't happen so when the paint job looked smoother, I went back to the garage and sprayed another light coat of gold on the body. This time the result looks much better, so now I'll let it dry and then I'll shoot some clear on it... Quote Link to comment Share on other sites More sharing options...
Sledsel Posted December 20, 2017 Share Posted December 20, 2017 Lookin good... Nice color. Quote Link to comment Share on other sites More sharing options...
moparfarmer Posted December 20, 2017 Share Posted December 20, 2017 Keep this progress coming..Lookin' real good so far.. Quote Link to comment Share on other sites More sharing options...
W-409 Posted December 29, 2017 Author Share Posted December 29, 2017 Thanks Andy and Wayne! Somehow I've always liked this (or something close anyway) color the best on these G-Bodies. So I just had to paint mine that way. Now I decided that the body had dried enough so that I could clear coat it. I sprayed two light coats, one kind of "almost-wet-coat" and then one wet coat of clear on it. I'm not sure if that's enough to be polished, but I need to try as I can't spray any more clear on the body or otherwise some of the smaller details and chrome trim will be hidden under the paint... And of course as I finished shooting the clear, a couple pieces of dust landed to the hood and roof... Luckily polishing should take care of them. Quote Link to comment Share on other sites More sharing options...
geewhiz Posted December 29, 2017 Share Posted December 29, 2017 I remember when this kit was in the hobby shops years ago but I never bought one of them. I wish I would have now. Niko, this build is absolutely fantastic!!! I look forward to seeing more progress!!! ????????? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.