Claes Ericsson Posted March 24, 2018 Share Posted March 24, 2018 In the Mopar world, a better detailed grille for the 68-9 MPC Coronets would be nice. But I guess the market would be extremely limited.... Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted March 24, 2018 Share Posted March 24, 2018 On 16/03/2018 at 5:16 AM, camaro69 said: Hello again, thank you all for your confidence. Hope the parts came out like you wanted them. An important advice for anybody who hasn´t worked with Frosted Detail parts from shapeways yet. Please be very careful at seperating the parts because this material is brittle and the structures are very thin because of details. Hope this wasn´t too late... Because of Bobby G´s request I´ve done the ´69 GTX grill too. Greets, Rico now that's a 69' GTX grill ! Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted March 24, 2018 Share Posted March 24, 2018 10 hours ago, Mr mopar said: now that's a 69' GTX grill ! Having owned several 1/1 1969 GTX's . IMO the center needs to be ever so slightly deeper inset Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted March 24, 2018 Share Posted March 24, 2018 1 hour ago, gtx6970 said: Having owned several 1/1 1969 GTX's . IMO the center needs to be ever so slightly deeper inset I agree with you! Quote Link to comment Share on other sites More sharing options...
camaro69 Posted March 25, 2018 Share Posted March 25, 2018 First of all thanks you guys again. Every suggestion to make these parts better is much appreciated. @gtx6970: The plan is to offer the whole trunk lid with seperate reflecting parts because this makes the conversion much easier. At the 69 grille the emblem is deeper than the rest. Don´t know how it turns out because for myself I have no print already. But two pieces are sold and maybe the buyer takes some pics so I can post them. @VRM: Great idea with the interior. But this will really take some time. I do all of this in my free time after work and all other howeworks. @Claes Ericsson: If you want the grille for the MPC Coronets please feel free to send me a PM. For me the limitation is not relevant. Rico Quote Link to comment Share on other sites More sharing options...
BobbyG Posted March 28, 2018 Share Posted March 28, 2018 Rico: I just received the 68 RR and GTX grills, all I can say is WOW! The detail is spot on and now I can't wait for the other Mopar RR/GTX pieces to come. Great product. Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted April 5, 2018 Share Posted April 5, 2018 Got my grills in a few days ago. preliminary ck out they look perfect Thanks Quote Link to comment Share on other sites More sharing options...
Mike Chernecki Posted April 6, 2018 Share Posted April 6, 2018 How about a grille for the "69 'cuda? The grille in the amt/mpc kit is awful. Quote Link to comment Share on other sites More sharing options...
camaro69 Posted April 7, 2018 Share Posted April 7, 2018 On 6.4.2018 at 3:35 PM, Mike Chernecki said: How about a grille for the "69 'cuda? The grille in the amt/mpc kit is awful. Will come... Quote Link to comment Share on other sites More sharing options...
dan_a Posted April 16, 2018 Share Posted April 16, 2018 Just received my grill, looks great! Very fast service through shapeways...maybe 7 or 8 days from the day I ordered. Quote Link to comment Share on other sites More sharing options...
camaro69 Posted May 18, 2018 Share Posted May 18, 2018 Hi there, thank you all for your support. After a very busy time I yesterday cut out the trunk lid of my 69 GTX to test fit the 68 one. There are still some issues. The openings for the reflecting parts have tomove down a little bit and the center of the front had to be sanded in shape. Also the top of the lid could be thicker in comparision of the kit plastic thickness. Anyway I´m pleased with the result till now. Will correct the issues in the near future to make this part ready to use. Here are some pics so you can tell me what you think. I want to do the taillights as a complete part set with the seperated rear fender areas. What you think about that? Rico Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted May 18, 2018 Share Posted May 18, 2018 (edited) Looks pretty good so far. And I agree, tightening up the spacing ( but not much ) between upper and lower horizontal bars would improve it a tad more. If I remember right there is about an inch or inch and half of decklid showing above the trunk applique before it rolls over to the top Also, if the decklid thickness is thinner around the edges than the kit body,,, it might be a good thing. . Even better would be have it printed with the bracing detail on the bottom side of the decklid Edited May 18, 2018 by gtx6970 Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted May 18, 2018 Share Posted May 18, 2018 Also, I'll add my 2 cents. if you feel so inclined. do the seats and door panels as well. Ive tried to do them with putty and failed miserably. So if done I'm a buyer Quote Link to comment Share on other sites More sharing options...
VRM Posted May 30, 2018 Share Posted May 30, 2018 On 5/18/2018 at 3:04 PM, gtx6970 said: Also, I'll add my 2 cents. if you feel so inclined. do the seats and door panels as well. Ive tried to do them with putty and failed miserably. So if done I'm a buyer Yep, I have already mentioned that those would be a great idea! Quote Link to comment Share on other sites More sharing options...
om617 Posted May 30, 2018 Share Posted May 30, 2018 Great work Quote Link to comment Share on other sites More sharing options...
camaro69 Posted May 30, 2018 Share Posted May 30, 2018 Hey guys, again thank you all for your support. I´m at fixing the issues on the trunk lid and doing the taillights at the moment. Then the other parts will come on my "bench". Sorry for the slow progress but I´ve been really busy. If there will be something new I will let you all know immediately. Rico Quote Link to comment Share on other sites More sharing options...
drodg Posted May 30, 2018 Share Posted May 30, 2018 (edited) I think the dress panel looks good. Missing Link makes great lenses for the 68 Roadrunner which are much better than the ones that come with the kit. The seats kind of hold me back on building a 68 GTX and now that you have a good grill it is tempting though. I have seen one person use putty and try to make correct seats. I don't think I could do it. So seats would be nice if you have nothing else to do. I am kidding you are doing great work. Thanks Edited May 30, 2018 by drodg Quote Link to comment Share on other sites More sharing options...
CapSat 6 Posted June 1, 2018 Share Posted June 1, 2018 On 3/24/2018 at 5:12 AM, Claes Ericsson said: In the Mopar world, a better detailed grille for the 68-9 MPC Coronets would be nice. But I guess the market would be extremely limited.... Rico, I would like to second this request, for a different reason...I’d like to see a 1968 Coronet grille but in 1/16, this would be the same grille in 1:1 that was used on the special Charger 500 NASCAR Model. It could be used to help convert the 1/16 General Lee kit to a Charger 500. Would you be at all interested in doing that piece in 1/16? If you did one, I would probably buy 2 or 3. Quote Link to comment Share on other sites More sharing options...
camaro69 Posted June 1, 2018 Share Posted June 1, 2018 Hey guys, had a little bit of time these days so tried to finish the rear end for the 68 GTX. Still have to do the bracing details on the trunk lid. Here some renderings of the progress. Like last time I will do a test print again for test fitting. Any suggestions and comments will be much appreciated. Thanks for looking. Rico Quote Link to comment Share on other sites More sharing options...
PlymouthFan Posted June 4, 2018 Author Share Posted June 4, 2018 On 6/1/2018 at 12:31 PM, camaro69 said: Hey guys, had a little bit of time these days so tried to finish the rear end for the 68 GTX. Still have to do the bracing details on the trunk lid. Here some renderings of the progress. Like last time I will do a test print again for test fitting. Any suggestions and comments will be much appreciated. Thanks for looking. Rico They look great Quote Link to comment Share on other sites More sharing options...
camaro69 Posted June 17, 2018 Share Posted June 17, 2018 Hey guys, although it´s not really according to the topic I want to show you something new. After a request I´ve modeled a special Plymouth hubcap. It´s designed to replace the kit outer wheel of the 69 AMT Plymouth GTX. Hope you´ll like it. Any comments will be much appreciated. Thanks, Rico Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted June 17, 2018 Share Posted June 17, 2018 OK.......this is WILD! I was just talking to a fellow at our local club meeting yesterday about this very thing, and now I come across this thread! VERY nice 3D rendering you got there! Those details look very correct, and I want to say your wheels are looking good too! I take it that you'll use the 3D printing for a master and cast these in resin? Also for the trunk lid and taillight panel...........those will be resin cast too? Excellent! Quote Link to comment Share on other sites More sharing options...
camaro69 Posted June 17, 2018 Share Posted June 17, 2018 Hi Bill, thanks for your reply but sorry I will offer these parts only 3d printed at my shapeways shop. Resin casting I haven´t tried yet. Maybe someday I will do that but anyway the 68 GTX rear end will come in eight parts. Especially the smaller ones would be very hard to cast. Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted June 17, 2018 Share Posted June 17, 2018 Rico, I've bought from Shapeways before (actually quite recently) and I'll definitely keep these in mind! What's your vendor name on Shapeways............the same as it is here? Thanks! Quote Link to comment Share on other sites More sharing options...
george 53 Posted June 17, 2018 Share Posted June 17, 2018 Rico, I have ordered your GTX grille already, and was VERY pleased with it. Is the rear grille ready yet? if so, then can I order it from you at the same place I got the grille from? Your detail work is amazing! Thanks!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.