Modlbldr Posted January 23, 2018 Share Posted January 23, 2018 I began this one recently and am having a blast with it. The kit was molded in orange, so I decided to paint it in a color that if the orange bled through it wouldn't matter much. So, I painted it in Testors Inca Gold. http:// http:// http:// Today I got the final coats of clear on it. Now to let it sit for a while and get the chassis and interior done. Going to do a Saddle Tan interior. Later- Quote Link to comment Share on other sites More sharing options...
charger74 Posted January 23, 2018 Share Posted January 23, 2018 That color looks very good on that car Quote Link to comment Share on other sites More sharing options...
kelson Posted January 23, 2018 Share Posted January 23, 2018 Looks good so far,i didn't realize you asked on my thread about the 69 i'm building,it's still going I've been dragging my feet a little bit. Quote Link to comment Share on other sites More sharing options...
PARTSMARTY Posted January 23, 2018 Share Posted January 23, 2018 Looks cool and i love inca gold!!! Quote Link to comment Share on other sites More sharing options...
espo Posted January 23, 2018 Share Posted January 23, 2018 I also like the color you used. The Foil trim looks great. Look forward to seeing the interior and chassis. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 23, 2018 Author Share Posted January 23, 2018 Thanks guys for the encouragement. I took a couple pics just now to show the difference between the actual paint color and the body with the orange plastic bleeding through the primer and paint. Kind of glad it did. Makes for an interesting color. http:// http:// Working on the chassis and suspension today. Later- Quote Link to comment Share on other sites More sharing options...
Slotto Posted January 23, 2018 Share Posted January 23, 2018 Great color and finish Quote Link to comment Share on other sites More sharing options...
geewhiz Posted January 23, 2018 Share Posted January 23, 2018 Gorgeous paint, Tom!!! The C3 Corvettes just look fantastic in gold!!! I'm looking forward to seeing more!!! Quote Link to comment Share on other sites More sharing options...
Snake45 Posted January 24, 2018 Share Posted January 24, 2018 9 hours ago, Modlbldr said: Thanks guys for the encouragement. I took a couple pics just now to show the difference between the actual paint color and the body with the orange plastic bleeding through the primer and paint. Kind of glad it did. Makes for an interesting color. http:// http:// Working on the chassis and suspension today. Later- I've noticed that some of the Testor colors can look quite different depending on what kind of primer they're over. Icy Blue comes to mind. Very soon I'm going to try their Fiery Orange over black primer and see if it looks passably close to '68 Corvette Bronze. It'll be a semi-custom car, like yours, so it won't really matter if it's not a perfect match. Yours looks quite nice in that color, BTW. Quote Link to comment Share on other sites More sharing options...
Jonathan Posted January 24, 2018 Share Posted January 24, 2018 That really jumps out! Nice. Quote Link to comment Share on other sites More sharing options...
Ron Hamilton Posted January 24, 2018 Share Posted January 24, 2018 That is sharp! Quote Link to comment Share on other sites More sharing options...
DumpyDan Posted January 24, 2018 Share Posted January 24, 2018 Looks real nice, and the price you paided for the paint very good. Quote Link to comment Share on other sites More sharing options...
vintagercr Posted January 24, 2018 Share Posted January 24, 2018 That colour really pops. Nice job on the louvers. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 24, 2018 Author Share Posted January 24, 2018 (edited) Thank you very much guys for the nice comments. This has been a fun build so far and I am very happy with the color. I spent lunch time yesterday painting chassis and suspension parts. Still have some touch ups to do but should be able to begin assembly today. The paint was bought many years ago at a local store that deals in hunting and fishing gear and has a huge toy section with a large selection of mainline (Revell mostly) models and paints. I bought it when this Testors line came out. All the LHS we're charging $5 and this place was $2.98. Because of that, I bought most of my paint there. It sat in my unheated garage for years until it started leaking at the bottom. I wasn't sure this can was going to work but it gave me a full can worth and sprayed great. I still have a few cans of various colors left. Later- Edited January 24, 2018 by Modlbldr Quote Link to comment Share on other sites More sharing options...
Michael in Illinois Posted January 24, 2018 Share Posted January 24, 2018 Looks great, love the color, cant wait to see the interior and body together Quote Link to comment Share on other sites More sharing options...
krassandbernie Posted January 25, 2018 Share Posted January 25, 2018 I dig the color on this Vette! I don't think the orange styrene bleeding through is changing the shade since most of the models I've seen painted with this paint look just like your Vette does. That is why I bought a can of this Inca Gold myself! Most of the colors in this line of paints don't match the cap exactly from my experience........which has been both a pleasant surprise and a let down depending on what color your talking about. The two orange colors were a let down for me because they did not match the cap exactly. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 25, 2018 Author Share Posted January 25, 2018 Krass- Thanks for the input. Not sure if it is bleeding through or not. Perhaps the more coats the darker it gets. I know when I sprayed the first two coats it wasn't as dark. But after the third it really popped. Either way, I think it looks nice. The only other color that I have used in this line has been the Root Beer for a 68 Firebird. Later- Quote Link to comment Share on other sites More sharing options...
espo Posted January 25, 2018 Share Posted January 25, 2018 As I mentioned before I think this a great color. I have used it on a couple of builds in the past and it has always turned out looking much like your finish. I don't doubt but what the Orange plastic has a curtain "bleed thru" since colors in this range tend to do that. But looking at the picture it very closely resembles the color on my two builds. As others have mentioned, the plastic spray can top is only close at best. In my case I used gray primer. If anything it looks like the Orange plastic may make the color a little richer and add some depth to the color. Your foil trim looks perfect. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 25, 2018 Author Share Posted January 25, 2018 David, Thanks. Yeah, I am starting to believe that this is more the natural color of the paint and that extra coats gives it a richer color. So far, all of the "Foil" work has been done with Molotow pens. I am planning to do a bit of actual foil work around the windshield and window frames after I finish the chassis work. Perhaps on Friday or Saturday night when it is quiet. Then I will hit it with another light coat of clear to seal it down. Got to spend some time looking for a nice Saddle Tan paint to start the interior. Later- Quote Link to comment Share on other sites More sharing options...
mustang1989 Posted January 25, 2018 Share Posted January 25, 2018 (edited) Say.......... I do like that color. I enjoy playing with the different shades of the same color with different primers/ undercoat colors. Lookin' good Tom. Edited January 25, 2018 by mustang1989 Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 25, 2018 Author Share Posted January 25, 2018 Thanks Joe. Later- Quote Link to comment Share on other sites More sharing options...
kelson Posted January 26, 2018 Share Posted January 26, 2018 9 hours ago, Modlbldr said: David, Thanks. Yeah, I am starting to believe that this is more the natural color of the paint and that extra coats gives it a richer color. So far, all of the "Foil" work has been done with Molotow pens. I am planning to do a bit of actual foil work around the windshield and window frames after I finish the chassis work. Perhaps on Friday or Saturday night when it is quiet. Then I will hit it with another light coat of clear to seal it down. Got to spend some time looking for a nice Saddle Tan paint to start the interior. Later- I tried mixing some up,but it's hard to match the pictures I've seen,if you find something please share! Quote Link to comment Share on other sites More sharing options...
High octane Posted January 26, 2018 Share Posted January 26, 2018 On 1/22/2018 at 8:42 PM, Modlbldr said: I began this one recently and am having a blast with it. The kit was molded in orange, so I decided to paint it in a color that if the orange bled through it wouldn't matter much. So, I painted it in Testors Inca Gold. http:// http:// http:// Today I got the final coats of clear on it. Now to let it sit for a while and get the chassis and interior done. Going to do a Saddle Tan interior. Later- NO bleed through if you paint colored plastic with Tamiya Silver Leaf, then your primer, and then your color and clear coats. It has worked for me a number of times. Try it. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted January 26, 2018 Author Share Posted January 26, 2018 11 hours ago, kelson said: I tried mixing some up,but it's hard to match the pictures I've seen,if you find something please share! I will Kelson. 10 hours ago, High octane said: NO bleed through if you paint colored plastic with Tamiya Silver Leaf, then your primer, and then your color and clear coats. It has worked for me a number of times. Try it. I'll give that a try on the next one. Thanks. Later- Quote Link to comment Share on other sites More sharing options...
Snake45 Posted January 26, 2018 Share Posted January 26, 2018 21 hours ago, Modlbldr said: Got to spend some time looking for a nice Saddle Tan paint to start the interior. Later- I've given up on trying to "match" most tan interiors. I've got a couple cans of Krylon or Rustoleum "satin" tans I use for interiors. They look okay to me and I can't recall anyone ever saying, "Hey, your tan interior color ain't right." Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.