Jantrix Posted March 5, 2018 Share Posted March 5, 2018 Very simply put - NO PARTS SWAPPING. The kit must be built with what's in the box. Only styrene stock (sheet, tubing, clear, etc.) and detailing parts (but nothing that replaces a kit part), can be added for the build. The recent thread about the AMT '36 Ford brought this to mind. Any interest? If so, I'll likely start this toward the end of the year. Quote Link to comment Share on other sites More sharing options...
Pat Minarick Posted March 6, 2018 Share Posted March 6, 2018 Would it be everyone building the same kit? Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted March 6, 2018 Share Posted March 6, 2018 2 hours ago, Pat Minarick said: Would it be everyone building the same kit? Oh, now that might be interesting. I’ve actually been doing close to what you describe lately (well, my two in process models) Depending on timing, I’d join. It’s actually nice to reduce choices and work with what you’ve got. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted March 6, 2018 Author Share Posted March 6, 2018 11 hours ago, Pat Minarick said: Would it be everyone building the same kit? I hadn't thought of that, and although the idea sounds cool, I think ultimately it would reduce the amount of folks who might participate. Either because it would require the purchase of another kit, or lack of interest in a 1927 Dinglewhopper. One thing I have learned over the years on the forums, is that the tighter the focus of a CBP, the amount of interest decreases dramatically. I think due to the nature of this CBP, most folks would naturally gravitate toward kits with a lot of custom options, which in most cases is a pre-1960 hot rod. 9 hours ago, Erik Smith said: I’ve actually been doing close to what you describe lately (well, my two in process models) Depending on timing, I’d join. It’s actually nice to reduce choices and work with what you’ve got. So have I. I've just never pulled the trigger and tried it. Kits like the AMT '57 Chevy hardtop, '36 Ford, '49/'50 Fords, Revell Ford Model A's and B's are no-brainers for this. I think it could be fun, and it would really stretch builders creativity and scratch-building skills. Quote Link to comment Share on other sites More sharing options...
LouO Posted March 6, 2018 Share Posted March 6, 2018 I like the idea of this, provided we can select our own / different kits. The community build off's have really been motivating me in getting back in to the hobby! Quote Link to comment Share on other sites More sharing options...
KWT Posted March 6, 2018 Share Posted March 6, 2018 I've been in a little bit of a funk lately... Haven't even started my entry in the inline CBP... but I'd probably be down for this. Quote Link to comment Share on other sites More sharing options...
64SS350 Posted March 7, 2018 Share Posted March 7, 2018 Not trying to be argumentative, just not understanding the true basis of this build. If this is to be a 'Just what's in the box build', then as soon as the allowance of styrene stock and detail parts were added, the idea is then derailed before it gets started. Am I missing something? Though I agree about picking your own kit, everyone building the same would be interesting also. Quote Link to comment Share on other sites More sharing options...
prostreeter69 Posted March 7, 2018 Share Posted March 7, 2018 I agree with Karl, if you are doing a out of the box build it should only be wants in the box. As soon as you start letting guys add things it gets complicated. I say we pick our own kit to build (more likely to get guys involved when they can just grab something off the shelves and build). Just my opinion! Jon Quote Link to comment Share on other sites More sharing options...
Jantrix Posted March 7, 2018 Author Share Posted March 7, 2018 Carl, Jon, great points and I've thought a lot about that since posting. The reason I added the allowance of styrene stock only, was to not limit how the kit was to be built. For instance, if I wanted to Z the frame on a Revell Model A or chop the top of the AMT '49 Merc, being allowed to use styrene stock is very useful in making those custom touches easier. If I was to say, you need to use the sprue if you need extra plastic, which is harder, folks might be less inclined to participate. The same goes for the detail parts. Some people just won't build a model where they can't wire the distributor and flock the carpets. They have a standard and won't lower them. And I wouldn't either. As I mentioned before, the more you narrow the scope of the CBP, the fewer people are interested. Just the whats-in-the-box idea of this CBP, will turn off plenty of people. Others it will challenge. The idea is to get people inspired, interested, and involved. Quote Link to comment Share on other sites More sharing options...
Erik Smith Posted March 7, 2018 Share Posted March 7, 2018 I agree with Rob, but definitely see the other points. I don’t think folks will be making their own wheels or engine blocks, so the small detailing parts and as needed styrene bits make sense. I built a model without wiring the engine and regretted it. Looked too plain. Depends on kit though... Quote Link to comment Share on other sites More sharing options...
otherunicorn Posted March 8, 2018 Share Posted March 8, 2018 We did a group out-of-the-box Gremlin build a couple years back. Quote Link to comment Share on other sites More sharing options...
MeatMan Posted March 9, 2018 Share Posted March 9, 2018 It does sound compelling. I don't know if I'll have time to participate though. However, I'm retiring this summer and will probably have more time than I think! Quote Link to comment Share on other sites More sharing options...
Lunajammer Posted March 9, 2018 Share Posted March 9, 2018 On 3/7/2018 at 2:42 PM, Erik Smith said: ...Looked too plain. Depends on kit though... True enough. There are some kits out there with so much engine detail in the kit that added detail doesn't add that much more. Some of the super cars come to mind, where wires and brackets are largely hidden anyway. But older AMT kits, (64 Impala, Chevelle, etc.) not so much. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted March 27, 2018 Share Posted March 27, 2018 I think I'd be in. As others have said, I'd liek to see our own choices of what to build, and no aftermaet parts of any kind. It should be literally, only what comes in the box. No styrene, no detailing, nothing. I think if we allow "a little" bit of scratchibuilding, then the lines become open to interpretation about what can or cannot be allowed. Box stock should be box stock. Quote Link to comment Share on other sites More sharing options...
MeatMan Posted March 27, 2018 Share Posted March 27, 2018 3 hours ago, iamsuperdan said: I think I'd be in. As others have said, I'd liek to see our own choices of what to build, and no aftermaet parts of any kind. It should be literally, only what comes in the box. No styrene, no detailing, nothing. I think if we allow "a little" bit of scratchibuilding, then the lines become open to interpretation about what can or cannot be allowed. Box stock should be box stock. But if that's the case, why allow paint? You can go nuts with limits. Quote Link to comment Share on other sites More sharing options...
64SS350 Posted March 27, 2018 Share Posted March 27, 2018 Make sure and pick a kit with those little paint tubs included!! Quote Link to comment Share on other sites More sharing options...
Jantrix Posted March 29, 2018 Author Share Posted March 29, 2018 On 3/27/2018 at 8:13 AM, iamsuperdan said: I think I'd be in. As others have said, I'd liek to see our own choices of what to build, and no aftermaet parts of any kind. It should be literally, only what comes in the box. No styrene, no detailing, nothing. I think if we allow "a little" bit of scratchibuilding, then the lines become open to interpretation about what can or cannot be allowed. Box stock should be box stock. You'de be surprised how many people will loose interest in a model where they are too limited artistically. The idea is to encourage building a model but not limit them so much, it's not finished. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted March 29, 2018 Share Posted March 29, 2018 I get what you're saying, but isn't that the challenge of the build? If you say that's a box stock build, so only what's in the box...and styrene and other detail parts and supplies, then it really isn't a what's-in-the-box build anymore. Each CBP build-off has a theme, and each theme has it's own set of challenges for those who choose to participate. In this case, the challenge is to keep it box stock. And if someone can't handle that, then maybe this challenge isn't the right fit, and they should take part in the next one. Anyway, this one is your idea, so whatever you say the rules are, that's what the participants need to abide by. It's all good. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted March 29, 2018 Author Share Posted March 29, 2018 (edited) A challenge will get you building, but inspiration keeps you building. We'll see how this pans out. I have two builds to finish before I even think about another. Edited March 29, 2018 by Jantrix Quote Link to comment Share on other sites More sharing options...
stavanzer Posted November 13, 2018 Share Posted November 13, 2018 Rob, curious to hear if there has been anymore thought given to this CPB? Quote Link to comment Share on other sites More sharing options...
disconovaman Posted November 13, 2018 Share Posted November 13, 2018 The MDA show in Roanoke Va. has a Class based on this challange... Their rules are rather limited also. I plan on building something for the 2019 show next year... I have a go to kit that I've learned little tricks to improve it by using nothing but the parts in the box. I've built probably 50 over the years...So I'll be up for whatever is desided upon. I feel like the rules should be you can only use supplies nessasary to build the kit... such as paint, glue, sandpaper, and maybe BMF/Molotow chrome pen since they are kinda in the same catagory. Everything else is supplied in the kit and you should be able to use your imagination for the rest. Just to give you an example...parts spur is your friend.. ? Another suggestion is if you feel like you will struggle then pick a 3 in 1 kit, the more options you have the better off you'll be. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted November 13, 2018 Author Share Posted November 13, 2018 9 hours ago, alexis said: Rob, curious to hear if there has been anymore thought given to this CPB? Alan, I have not. Between the P2P and the Cannonball, my dance card for this coming year is full. However if this is something anyone else would like to take on and run, I would certainly be cool with that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.