gotnitro? Posted July 20, 2018 Author Share Posted July 20, 2018 The M747 trailer is ready for primer !! I broke a few small parts trying to remove from sprue..ridiculous attachment points at weak areas...oh well it looks good when assembled. The combo will eventually have a Type 69 II"war trophy " being pulled onto the deck. I like the spinach green /Iraqi sand combo w the US Sand used during the war. Enough gab... The trailer airtanks had individual lines fitting into the trailer frame.. I chose the stowed landing leg option, a few brass brackets secured w Future.. More to come ! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted July 20, 2018 Author Share Posted July 20, 2018 (edited) Another view Now it's time for the 8v92 TA build.. I did remove the lower side panels from hood to show this off as you can see they engineered the kit parts to fit directly onto the resin engine. Even the radiator holes line up with the hoses...but...what's up with that bare firewall...I'll deal w that next . Only problem I've dealt with so far is the tires..terrible fit and keep popping off which I'll replace w resin replacements once available. Vinyl is okay for house siding..lol Any questions or feedback welcome!! Edited July 20, 2018 by gotnitro? Extra pics keep showing up Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted July 20, 2018 Author Share Posted July 20, 2018 Ignore those last 3 pics...I cant remove them from post dunno why Quote Link to comment Share on other sites More sharing options...
SfanGoch Posted July 20, 2018 Share Posted July 20, 2018 (edited) Looking good, Jeff. Re the tire fit, take some tissue, soak it in diluted white glue and stuff inside the tires. When that dries, the tire sidewalls will be stiffer and prevent them from popping off the wheels. I did that with the kit supplied Michelins in the M1070. It improved the fit and was good enough until I got a set of resin tires and wheels. Edited July 20, 2018 by SfanGoch Quote Link to comment Share on other sites More sharing options...
Bennyg Posted July 20, 2018 Share Posted July 20, 2018 Looks good. The kit seems to fit together nicely. I’ve ordered the HobbyBoss version. Only cost me $100 Australian including postage. Will most likely get an engine next pay. I’ve started gathering info and pics from the net. I’m not sure if I’m going to build mine in desert sand or post military life bright civilian colours. Ben. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted July 20, 2018 Author Share Posted July 20, 2018 Thanks Joe ! The issue I'm mainly having is the tires actually look over inflated rim doesn't have enough lip to hold them..but I'll try your trick Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted July 20, 2018 Author Share Posted July 20, 2018 Good to hear Ben ! Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted July 21, 2018 Share Posted July 21, 2018 Man that looks good! Quote Link to comment Share on other sites More sharing options...
TheSDTrucker Posted July 21, 2018 Share Posted July 21, 2018 Such a great looking model! Really makes me wish we got this level of in-the-box detail for 1/25 Quote Link to comment Share on other sites More sharing options...
Ben Posted July 22, 2018 Share Posted July 22, 2018 (edited) After seeing this, I decided to get the HobbyBoss version. I was not happy when it got here!! The sorry POS in China literally wrapped the kit box with cardboard to ship it.......from China! There was not a speck of padding between the kit and the outer box! I told the seller I wanted a new kit sent properly with a postage paid label to send this kit back! He offered a refund of $30.00 so I took it. Nothing was broken in the kit, just bent, mainly the trailer gooseneck. Nothing I can’t fix. What I am still not happy with is the box! I like to have decent kit boxes! I can barely even open and close this one! So I ended up paying a total of $50.00. Edited July 22, 2018 by Ben Quote Link to comment Share on other sites More sharing options...
Bennyg Posted July 22, 2018 Share Posted July 22, 2018 1 hour ago, Ben said: After seeing this, I decided to get the HobbyBoss version. I was not happy when it got here!! The sorry POS in China literally wrapped the kit box with cardboard to ship it.......from China! There was not a speck of padding between the kit and the outer box! I told the seller I wanted a new kit sent properly with a postage paid label to send this kit back! He offered a refund of $30.00 so I took it. Nothing was broken in the kit, just bent, mainly the trailer gooseneck. Nothing I can’t fix. What I am still not happy with is the box! I like to have decent kit boxes! I can barely even open and close this one! So I ended up paying a total of $50.00. I just paid $100 Australian the other day for one from China. Hopefully mine arrives better than yours did. Ben Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 2, 2018 Author Share Posted August 2, 2018 Wow that box is terrible. I had bad luck ordering across the pond a few times , mainly broken and missing sprues. Cant wait to see your build start, mines in paint been too lazy to snap pics along the way Quote Link to comment Share on other sites More sharing options...
Bennyg Posted August 2, 2018 Share Posted August 2, 2018 I just ordered some Tamiya LP range of paint, LP-30 light sand. I thought I’d give that a whirl while at at trying a new style of kit. Ben Quote Link to comment Share on other sites More sharing options...
afx Posted August 2, 2018 Share Posted August 2, 2018 That is one impressive kit and you are doing a great build of it Jeff. Quote Link to comment Share on other sites More sharing options...
Chariots of Fire Posted August 2, 2018 Share Posted August 2, 2018 If you are still concerned about tires check out Shapeways. There are several tire options there. I have actually had some designed for specific projects and got them printed. I buy a couple, one for use as a master and the other as a backup. Then I make a mold and cast up as many as I need. Less expensive that way. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 3, 2018 Author Share Posted August 3, 2018 9 hours ago, afx said: That is one impressive kit and you are doing a great build of it Jeff. Thanks ! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 3, 2018 Author Share Posted August 3, 2018 Ben - sounds good ! I used tamiya buff/ deck tan 50-50 for this w a NATO green base for shadows. I read these trucks..and everything deployed to Saudi Arabia were repainted before going into theater w local paints which faded and peeled off quickly. I figured a hastily painted truck , weathered mildly was appropriate. I did find out..meng sprues needed a good cleaning before paint..unusual for this brand. I hit areas of mold release i thought were clean. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 3, 2018 Author Share Posted August 3, 2018 Thanks Charles ! I'll definitely check shapeways. Heard rumor resin tires were available around fall.! Just a small update tonite..the tractor is painted except a few cab parts ! I added a few bits on firewall to fill the empty space...after setting the hood on..it was all in vain. Oh well we know they're under it lol. The engine will get oiled up and exhaust rusted before closing up I'll seal the paint w future, then add oil leaks, fuel spills and wear n tear . Course our environmentally friendly military wouldn't spill any fuels lol I started the dash details, more to come. Those tiny red spots are circuit breakers !! The M747 has its base green applied, next will be sand along the sides and bottom. I'm trying something to show the worn paint on the deck . I sprayed alclad steel ( it looks more black than steel ) where I figured the most wear would be. Next a coat of hairspray then green. I'll chip that away, seal w clear..and repeat w the sand..eventually I hope for a scuffed metal peeking thru under the other layers More to come ! Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted August 3, 2018 Share Posted August 3, 2018 Very Impressive!! Quote Link to comment Share on other sites More sharing options...
Dieselhead Posted August 3, 2018 Share Posted August 3, 2018 Coming together great! Can't help but think the Tamiya M1A1 Abrams kit would go great with this! Quote Link to comment Share on other sites More sharing options...
Bennyg Posted August 3, 2018 Share Posted August 3, 2018 Very cool! That engine bay turned out great. Ben Quote Link to comment Share on other sites More sharing options...
mckenzie913 Posted August 4, 2018 Share Posted August 4, 2018 WOW!!!! Very impressive. Thanks for all the pictures. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 4, 2018 Author Share Posted August 4, 2018 Thanks everyone I really appreciate you following along ! I started creating the worn paint on the M747 today, after giving it a light coat of dirt cheap hairspray. First up was a coat of NATO green over the HS , letting it dry about 20 minutes. Tools I use for the next step..warm tap water , fine sanding stick, and a couple old brushes w the ends cut very close to the ferrule. Anything works, this parts fun..use your imagination how tracks would move across the metal..and chip away. Working a small section, dabbing water first then scuffing, scraping, and chipping away . Te water dissolves the HS removing the coat above it !!! If ya mess up..spray another color coat and try again !! Keeping it random makes it more interesting imo. A few bare spots broke thru , but I'll fix that during the next cycle. After it dries, I'll seal w future, then add the next color and repeat! I stayed away from edges intentionally, I'll use the sponge chipping for that..more controlled. More to come ! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted August 4, 2018 Author Share Posted August 4, 2018 The options for a load were numerous, anything the US military used from mid 80s to early 90s would fit...the Abrams would be great option, this truck had just enough capability to haul one..just. My duty station on Ft Hood had a fantastic museum of captured Iraqi equipment brought back after Desert storm. I had chose an Iraqi Auf 1 SPG which France sold them years before. The huge turret and 155mm barrel looks cool..I had started years ago..ironically it was from Meng also ! Here's the load I'll spray this Iraqi sand..much lighter than the US used..should make an interesting contrast. The one issue I caused by loading trailer, I'll either need to replace the winch cables to reach this tank to appear as it's being loaded..or add chain binders to strap it down Thanks for following any comments welcome Quote Link to comment Share on other sites More sharing options...
TheSDTrucker Posted August 5, 2018 Share Posted August 5, 2018 This project is so incredible to watch! All the small details are incredible, and you have a lot of handy tips! Keep up the great work, I love following this build! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.