PierreR89 Posted July 15, 2018 Share Posted July 15, 2018 (edited) Have been building on this for a couple of days and i did the final things on it today It was fun to build but it did fight me on some parts... I hope that round2 have fixed those problems with their upcoming rerelease. The biggest problem was that the fenders did not line up with the cab if you are using the cabmounts molded on to the framerails. The manual say to mount the cab before the fenders but you have to mount those + the radiator first and then adjust the cab after them removing the molded slots in the interiorbucket for the cab mounts helps alot. Another problem was the passengerside mirrorarm as it is exactly the same as the driverside but this side needs to have the bottom leg bent in an angle to have the mirror sit straight, i did not care and now it is all over the place... And for those who might build one when you reach step 17 in the instruction mount the exhaustpipe that goes between the engine and stack before you mount the springbrace on the front springs. I did not... but after many twists and turns it finally came in to its correct place Also as a fun thing i did notice that Mack and Scania cooperated with eachother at one time because alot of the parts on the engine and placement of others is almost exactly the same as Scania have on their v8,s from this era Edited July 15, 2018 by PierreR89 Quote Link to comment Share on other sites More sharing options...
redneckrigger Posted July 15, 2018 Share Posted July 15, 2018 Classic old workhorse......................NICE! Quote Link to comment Share on other sites More sharing options...
ATHU Posted July 15, 2018 Share Posted July 15, 2018 Looks amazing, well done!! Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted July 16, 2018 Share Posted July 16, 2018 Nice looking build! Quote Link to comment Share on other sites More sharing options...
slusher Posted July 17, 2018 Share Posted July 17, 2018 Great looking Mack! Quote Link to comment Share on other sites More sharing options...
clayton Posted July 17, 2018 Share Posted July 17, 2018 Sharp! When will this be out? Quote Link to comment Share on other sites More sharing options...
Bennyg Posted July 17, 2018 Share Posted July 17, 2018 (edited) Very nice! I’m glad the DM800 is getting rereleased. I believe Mack and Scania shared the same engine block for the 673, 711, the E9 also. The V8 Scania sounds similar to an E9 Mack V8, just not as throaty. Ben Edited July 17, 2018 by Bennyg Misspelled words Quote Link to comment Share on other sites More sharing options...
towman1271 Posted July 21, 2018 Share Posted July 21, 2018 great job! Quote Link to comment Share on other sites More sharing options...
PierreR89 Posted July 21, 2018 Author Share Posted July 21, 2018 Thanks. Quote Link to comment Share on other sites More sharing options...
GRiN Posted July 21, 2018 Share Posted July 21, 2018 Love the green paint. I have my one at least 2 maybe more when they come out. Gary Quote Link to comment Share on other sites More sharing options...
PettyKW43 Posted July 22, 2018 Share Posted July 22, 2018 Nice work! I am glad to see the reissue of this kit coming as well . Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.