jeffdeoranut Posted July 17, 2018 Share Posted July 17, 2018 has anybody used the preval paint system...results? ease of use? Quote Link to comment Share on other sites More sharing options...
Theo Posted July 17, 2018 Share Posted July 17, 2018 Hi jeffdeoranut, I use these periodically and find them useful in a few situations. They are NOT an airbrush substitute, and only moderately "better" than spray cans (which is my most used paint delivery system). I have sprayed both acrylics and enamels (appropriately thinned) with no issues. I was very happy with the results using it to spray the microscale gloss clear. I have not yet tried spraying premixed airbrush paints with it, but it is on my todo list and I don't see why it wouldn't work. I find the spray thinner and lighter, but without really any more control than the typical spray can. Coats usually come out pretty even and since a little light sometimes need to put on an extra coat compared to spray cans. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted July 18, 2018 Share Posted July 18, 2018 I've tried 'em several times over the years hoping for good results. Nah. In a pinch, where you just HAVE to be able to spray something, well, maybe. Like the man says...NOT a substitute for an airbrush, and really not as good as many rattlecans. Of course, my remarks are based on expecting a show-quality finish when I'm done. If mediocre, average results rock your world, rock on. Quote Link to comment Share on other sites More sharing options...
jeffdeoranut Posted July 18, 2018 Author Share Posted July 18, 2018 15 minutes ago, Ace-Garageguy said: I've tried 'em several times over the years hoping for good results. Nah. In a pinch, where you just HAVE to be able to spray something, well, maybe. Like the man says...NOT a substitute for an airbrush, and really not as good as many rattlecans. Of course, my remarks are based on expecting a show-quality finish when I'm done. If mediocre, average results rock your world, rock on. I really have a dilemma as im airbrushed challenged...lol Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted July 18, 2018 Share Posted July 18, 2018 (edited) 31 minutes ago, jeffdeoranut said: I really have a dilemma as im airbrushed challenged...lol Well, as they say, "your results may vary". Seriously, try one. Theo said he got good results. Maybe I got a series of bad units. Maybe somebody in the store had already sprayed out half the propellant, or maybe they'd been on the shelf forever and leaked-down (the last several I tried were delivered directly from a bodyshop supply outlet). Honestly, now that I really think about it, it seems like the FIRST time I used one, over 25 years ago, it worked pretty well. Last time I tried one was in about 2007, and I wasn't happy at all...and vowed never-again. It looks like you can get a 2-pack for around $11, so that's not a huge investment for experimenting (though by the time you have mixing paint to the right viscosity dialed in, you might be out of pressure). If it's possible to swap the nozzles with Tamiya rattlecan nozzles, that might be an improvement too. Edited July 18, 2018 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
cobraman Posted July 19, 2018 Share Posted July 19, 2018 I used them to shoot Duracoat on a couple of my cheap firearms and they worked good for that. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.