Mike12 Posted January 22, 2019 Share Posted January 22, 2019 Good Afternoon all from balmy northern Idaho, Always struggle with Revell wheel mounting. Not the models with metal pins, the ones with plastic extensions of the axle. Expect 'click' and free rotation, does not always happen. Would appreciate any tips and or info. Thanks, Mike Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted January 22, 2019 Share Posted January 22, 2019 I purposely make my wheels NOT roll. I don't want them rolling off a table or shelf. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted January 22, 2019 Share Posted January 22, 2019 8 minutes ago, Tom Geiger said: I purposely make my wheels NOT roll. I don't want them rolling off a table or shelf. I kind of agree with this. I'm not planning on driving it anywhere or playing with it in the sand box when it's done, so what's the point. Steve Quote Link to comment Share on other sites More sharing options...
DPNM Posted January 22, 2019 Share Posted January 22, 2019 (edited) Add me to the list of the 2 reply's before me. I build my models to not roll. I make either the front or rears stationary. Hate to have one roll someplace it shouldn't. Edited January 22, 2019 by DPNM Quote Link to comment Share on other sites More sharing options...
Ramfins59 Posted January 22, 2019 Share Posted January 22, 2019 Ditto... ditto...ditto... I had a car roll off a shelf once... never again. Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted January 22, 2019 Share Posted January 22, 2019 I have been wondering on my latest project, how to make the wheels more sturdy. They flop around like crazy. I had considered gluing them solid, but wasn't sure if rotating wheels was considered better than not. Thanks for the answer, mine will get the glue from now on! Quote Link to comment Share on other sites More sharing options...
gtx6970 Posted January 22, 2019 Share Posted January 22, 2019 48 minutes ago, Ramfins59 said: Ditto... ditto...ditto... I had a car roll off a shelf once... never again. Agreed, Ive had more than one roll off the shelf and make a mess . Quote Link to comment Share on other sites More sharing options...
Fat Brian Posted January 22, 2019 Share Posted January 22, 2019 Its usually the parting seems on the little pins that prevent the snap on type wheels from rolling freely. VERY careful sanding of the pin to remove the seem helps a lot. The other issue is that there can be a little flash in the holes of the wheel backs, again, very careful sanding or knife work can fix it but the tolerances are very small. Another thing that can gum up the works is paint, if you want a free rolling wheel leave the pins and the holes of the wheel backs bare plastic. Obviously there are drawbacks to rolling wheels but those are some tips for getting them if it matters to you. Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted January 22, 2019 Share Posted January 22, 2019 7 minutes ago, gtx6970 said: Agreed, Ive had more than one roll off the shelf and make a mess . There was a model show ( not ours) where they moved a table, tilting it slightly and models rolled to their deaths! Quote Link to comment Share on other sites More sharing options...
Dave Van Posted January 22, 2019 Share Posted January 22, 2019 Like 'Role Model'........confused....... Quote Link to comment Share on other sites More sharing options...
RichCostello Posted January 22, 2019 Share Posted January 22, 2019 11 minutes ago, Dave Van said: Like 'Role Model'........confused....... Hey, that's just the way he roles. Quote Link to comment Share on other sites More sharing options...
peteski Posted January 23, 2019 Share Posted January 23, 2019 (edited) Toy collectors like wheels which can roll freely. Scale model builders glue their wheels on so the models are static displays, and don't roll off of a table by accident. Edited January 23, 2019 by peteski Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted January 23, 2019 Share Posted January 23, 2019 Nice (or not so nice) models should NEVER roll! Quote Link to comment Share on other sites More sharing options...
MrObsessive Posted January 23, 2019 Share Posted January 23, 2019 I want to add that I've got a '61 T-Bird promo that I have to CONSTANTLY make sure there's a penny or something in front of one of its tires. Failing that, it's already rolled off the shelf and on to the floor! No damage, but reinforces why I don't like rolling models. It needs a case, but at the moment I have none for it. Quote Link to comment Share on other sites More sharing options...
Jantrix Posted January 23, 2019 Share Posted January 23, 2019 I had a pal who was of the mind that a modelof a car should roll, because cars roll. Period. So every model he built, rolled. I advised against it, but he was adamant. He asked me over once to help out with a bathroom remodel which included removing plaster and lathe. As you ight imagine it requires some force to remove that sort of thing. Even though his shelves were not on the same wall, but an adjoining wall, we vibrated his models right off the shelves. That evening, he discovered the carnage. 20-30 models, which had purposely been up on high shelves, (out of the reach of little monsters known as children) had come crashing down onto the hardwood floor. He mourned for days. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.