Zen Posted September 28, 2022 Share Posted September 28, 2022 On 9/24/2022 at 4:02 PM, Gramps46 said: Just arrived this 1946 Dodge Power Wagon Special Edition Ertl Collectibles in 1/25 scale. For $15 plus shipping with all paperwork and box I could not resist. As a new Air Force 2nd Lt in 1968 we had a Power Wagon Ambulance as our office vehicle. Just got mine delivered today, pretty nice diecast. Wondering if there is a safe way to remove the Wix marking from the doors? Quote Link to comment Share on other sites More sharing options...
caapa Posted September 28, 2022 Share Posted September 28, 2022 Hi Zenon, use cotton stick with nail polish remover. First test the base colour on a not exponated area. If one - two light wipes don`t solve the colour you can go to the tampo-print. Again with light wipes you can remove it. Possibly you will need to correct the shine of the area. Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted September 28, 2022 Author Share Posted September 28, 2022 6 minutes ago, caapa said: Hi Zenon, use cotton stick with nail polish remover. First test the base colour on a not exponated area. If one - two light wipes don`t solve the colour you can go to the tampo-print. Again with light wipes you can remove it. Possibly you will need to correct the shine of the area. I use only non-acetone polish remover. It is safer and works for me. Quote Link to comment Share on other sites More sharing options...
Zen Posted September 29, 2022 Share Posted September 29, 2022 Thanks for the info guys, will give that a try. Quote Link to comment Share on other sites More sharing options...
HomerS Posted October 6, 2022 Share Posted October 6, 2022 Walked past the Duster too many times and for $20, I caved. Needs mirrors and one wiper. I may have the wiper or something close in a parts bin in the man cave. I worked for a company that my boss had an XLR. Since the 'company' owned the car, my name was on the company insurance policy so I got to drive it. Another GM vehicle that had potential and plug pulled too soon. Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 7, 2022 Author Share Posted October 7, 2022 I got lucky and was the only bidder on this 1988 Corvette 35th Anniversary Special Editon from Franklin Mint. I do have a special attraction to all white Corvettes so this fit the bill. 4 Quote Link to comment Share on other sites More sharing options...
keyser Posted October 7, 2022 Share Posted October 7, 2022 Gary, nice model. I’ve never seen a 1:1 of that car, did they do any like that? Really like black over white. Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 7, 2022 Author Share Posted October 7, 2022 23 minutes ago, keyser said: Gary, nice model. I’ve never seen a 1:1 of that car, did they do any like that? Really like black over white. 1988 was the 35th anniversary of Corvette production , so a coupe only 35th Special Edition Package (RPO Z01; $4,795.00) was available. White was the theme, in observance of the 1953 Corvettes, all of which had white exteriors. Included were white wheels along with white door handles and side strip. 1 Quote Link to comment Share on other sites More sharing options...
keyser Posted October 7, 2022 Share Posted October 7, 2022 Cool. That could’ve been a Let me google that for you moment, but you’re kind. 🤣 Truly have never seen one, even then. Ermine white ftw, glad this is over white guts. 👍🏼 Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 14, 2022 Author Share Posted October 14, 2022 As I was storming out of Lowes today, storming because they will be glad to sell you a refrigerator but will not sell you a water filter replacement. So I almost ran into a rack of diecasts and one diecast stood out to me because it was bigger than the rest. This Jeep US Postal Service delivery vehicle is a Kinsmart 1/26th scale diecast. Being a Jeep guy, I had to have it. Tom Geiger might have posted this already. Living in the greater Washington DC area I just wanted to let you know those are not meant to be bullet holes in the background. 5 1 Quote Link to comment Share on other sites More sharing options...
cobraman Posted October 14, 2022 Share Posted October 14, 2022 Looks to be pretty detailed. Quote Link to comment Share on other sites More sharing options...
keyser Posted October 14, 2022 Share Posted October 14, 2022 (edited) Bullet holes could be almost any post office 🤣 They don’t call it “goin’ postal” for nuttin’. Filters both water and air cheapest on Bezos’ site. He needs the money. Edited October 14, 2022 by keyser 1 Quote Link to comment Share on other sites More sharing options...
swede70 Posted October 15, 2022 Share Posted October 15, 2022 Greetings, This was an unexpected eBay find, while I think it was mistaken by some to be a damaged sealed iteration of the 1:18th new-tool '72 Minichamps CSL versus the older all-opening dealer promo that it is. Shredded license plate decals (almost unavoidable on this release), a missing front license plate mount and a missing wiper detract from things, although most of this I was able to address. $41 plus $9 shipping was paid, contrasting this to about $200 for the same promo or the $120-$150 sealed model. Not the best eBay auction listing write-up for this model, hence maybe less competition encountered? Also turned up in recent days would be a Kyosho BMW LMR sports prototype endurance racer also in 1:18th scale. A visit to an area BMW dealership revealed that a new Heritage Collection rerelease based on the same tool is out there to be had for $94 if one aggressively price shops, although soon after I went looking for examples on eBay and found a seriously moldy box Sebring iteration at a Buy It Now price of $18.95 - hence a deal of sorts. When new I think these retailed for $79.95 and met some customer resistance for being one of the first sealed/nonopening diecast models of note, but still a nice thing to have. Some scrubbing was needed, but obviously not horrible in sum. Thanks for your review of this post. Mike K./Swede70 5 Quote Link to comment Share on other sites More sharing options...
slusher Posted October 15, 2022 Share Posted October 15, 2022 13 hours ago, Gramps46 said: As I was storming out of Lowes today, storming because they will be glad to sell you a refrigerator but will not sell you a water filter replacement. So I almost ran into a rack of diecasts and one diecast stood out to me because it was bigger than the rest. This Jeep US Postal Service delivery vehicle is a Kinsmart 1/26th scale diecast. Being a Jeep guy, I had to have it. Tom Geiger might have posted this already. Living in the greater Washington DC area I just wanted to let you know those are not meant to be bullet holes in the background. Real nice score, Gary! Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 26, 2022 Author Share Posted October 26, 2022 (edited) I got lucky a few days ago and bid on a $6.00 Ferrari F12tdf 2015 and was the only bidder. Figuring my chances were zilich I promptly forgot about it till notified that i was the winner. Fortunately, I fall above the age limit too. Edited October 26, 2022 by Gramps46 4 1 Quote Link to comment Share on other sites More sharing options...
cobraman Posted October 26, 2022 Share Posted October 26, 2022 Looks great ! Such a deal ! Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted October 26, 2022 Share Posted October 26, 2022 Kinda thought I was done buying diecasts, but when I came across this perfect 1/24 Franklin Mint Mercedes W196 for way under market asking prices, I had to spring for it. The engine isn't the greatest, and it needs much better wire wheels, but at first examination, I think the tooling designers got the shape and proportions quite close. 3 Quote Link to comment Share on other sites More sharing options...
cobraman Posted October 27, 2022 Share Posted October 27, 2022 Nice ! Better wheels will really perk that up ! 2 Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted October 28, 2022 Share Posted October 28, 2022 On 10/27/2022 at 12:19 AM, cobraman said: Looks great ! Such a deal ! You can't go wrong with that price, Gary - a real steal! Quote Link to comment Share on other sites More sharing options...
1959scudetto Posted October 28, 2022 Share Posted October 28, 2022 On 10/27/2022 at 12:28 AM, Ace-Garageguy said: Kinda thought I was done buying diecasts, but when I came across this perfect 1/24 Franklin Mint Mercedes W196 for way under market asking prices, I had to spring for it. The engine isn't the greatest, and it needs much better wire wheels, but at first examination, I think the tooling designers got the shape and proportions quite close. Nice find, Bill - I have this one also, and its weakest points are the plastic wheels and the huge gap around the hood. PMA/Minichamps' different 300 SLR versions would have the correct wheels: 1 Quote Link to comment Share on other sites More sharing options...
keyser Posted October 28, 2022 Share Posted October 28, 2022 FPP doing a kit now. Awesome as usual but can’t put it on shelf immediately. Quote Link to comment Share on other sites More sharing options...
NYLIBUD Posted October 31, 2022 Share Posted October 31, 2022 (edited) Wow some very cool diecasts here.The Duster,the mail truck,the white Corvette,etc.I just picked up a couple diecasts diecast at a swap meet yesterday.I thought it was cool finding an exact replica of the Baja motorcycle in a very small scale,to the larger one. Edited October 31, 2022 by NYLIBUD Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted October 31, 2022 Author Share Posted October 31, 2022 Neat finds Ron. Thanks for sharing them with us. Quote Link to comment Share on other sites More sharing options...
NYLIBUD Posted November 1, 2022 Share Posted November 1, 2022 Yea my pleasure.I actually bought the truck at a 7/11..And i’ll let you in on 🤫,a little secret,Shhh,lol.The truck was actually already weathered,and muddy.It came just like you see it.Idk,i just thought it looked pretty cool.And as i said before, that the small scale bike just happens to be a replica of the the larger bike. Quote Link to comment Share on other sites More sharing options...
Brudda Posted November 6, 2022 Share Posted November 6, 2022 Hello guys, I did not get these today. Actually I cannot remember when I purchased them. But they are cool subjects. Thought you guys might like them. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.