Jump to content
Model Cars Magazine Forum

Interior painting


Recommended Posts

Everyone has a favourite, but I like Humbrol for the range of shades, and because they have semigloss as well as flat finishes.  I like building a lot of old stuff, and the Humbrol colours seem to be the closest match, and that applies to their gloss finishes as well.  They hav ea maroon and a dark blue that are just about bang on for what Ford was using in the '30s and '40s.

That said, I'll use Model Master and Tamiya paint if what they have is closer to what I want.

Link to comment
Share on other sites

All of the above!

There is no answer to this question.

Everything is fair game.

I've used pretty much everything from automotive lacquer, to acrylic craft paint.

It's not so much the material you use, but what you do with it.

 

Case in point, this single interior was painted with Testors acrylic, Testors lacquer, Duplicolor touch up paint and MCW paint.

 

Steve

 

2v2EQ5HM8xwUbWP.jpg

2v2EQ5akLxwUbWP.jpg

2v2EQ5Em3xwUbWP.jpg

Edited by StevenGuthmiller
Link to comment
Share on other sites

You can use just about any brand of paint you want, it's the finish that you should be concerned about. By that I mean the amount of gloss in the finish. This will very from a low gloss for vinyl or leather interior materials. A flatter finish for a cloth material. Remember the top of a dash board will tend to have a flat finish in a 1:1 to cut down on glair while driving. Sometimes you will be trying to have an interior that matches the exterior or something a couple of shades darker or lighter. I think a builder would want to get comfortable with how clears dry flat or semi gloss.   

Link to comment
Share on other sites

On 4/13/2019 at 2:07 PM, StevenGuthmiller said:

All of the above!

There is no answer to this question.

Everything is fair game.

I've used pretty much everything from automotive lacquer, to acrylic craft paint.

It's not so much the material you use, but what you do with it.

 

Case in point, this single interior was painted with Testors acrylic, Testors lacquer, Duplicolor touch up paint and MCW paint.

 

Steve

 

2v2EQ5HM8xwUbWP.jpg

2v2EQ5akLxwUbWP.jpg

2v2EQ5Em3xwUbWP.jpg

BTW Steve, that interior looks awesome! Those buckets look like 1:1 seats. 

 

Link to comment
Share on other sites

1 hour ago, Speedfreak said:

BTW Steve, that interior looks awesome! Those buckets look like 1:1 seats. 

 

Thanks Gene.

Interiors have become one of my downfalls! :rolleyes:

I find myself spending more and more time trying to perfect some of them.

The '65 Plymouth Fury that I'm working on now has gone even a step further with removing those darned convertible top wells!!

But it went better than I had expected.

 

 

Steve

 

2v2E7Pjv5xwUbWP.jpg

Link to comment
Share on other sites

1 hour ago, Speedfreak said:

Wow, you primer your interiors? I never do that, or at least not usually. What kind of primer is that?

This is just Testors primer.

When you're doing this kind of extensive modification, it helps a great deal to prime the parts to make it easier to see how things are turning out.

Plus the fact that I will often use automotive lacquers on at least some of the parts.

 

 

Steve

Link to comment
Share on other sites

On April 16, 2019 at 10:05 AM, Speedfreak said:

Wow, you primer your interiors? I never do that, or at least not usually. What kind of primer is that?

 

On April 16, 2019 at 11:35 AM, StevenGuthmiller said:

This is just Testors primer.

When you're doing this kind of extensive modification, it helps a great deal to prime the parts to make it easier to see how things are turning out.

Plus the fact that I will often use automotive lacquers on at least some of the parts.

 

 

Steve

I prime everything  even what I brush paint, makes a big difference .....

Link to comment
Share on other sites

6 hours ago, slusher said:

 

I prime everything  even what I brush paint, makes a big difference .....

I do as well.

Nearly every part that I paint has had some sort of work done on it, (usually at least mold lines removed) so priming shows me if there are any more issues to address before the paint goes on.

In my opinion, removing as many mold lines as possible is a big first step to a realistic as possible finished product.

I can't begin to count how many highly detailed engine compartments I have seen with a big mold line still running across the top of the radiator!

 

Steve

Link to comment
Share on other sites

1 hour ago, StevenGuthmiller said:

 

In my opinion, removing as many mold lines as possible is a big first step to a realistic as possible finished product.

Steve

This

And cutting the tub apart to facilitate masking and spraying...over primered plastic, is a must...in my opinion.

Link to comment
Share on other sites

2 hours ago, StevenGuthmiller said:

In my opinion, removing as many mold lines as possible is a big first step to a realistic as possible finished product.

Absolutely! Probably 25% (or more) of my time in a full-detail build goes to removing mold lines and edge flash. (And their cousin, glue seams.)

When I see pictures of parts painted still on the sprue, I figure that's not a serious modeler. :unsure:

Link to comment
Share on other sites

1 hour ago, martinfan5 said:

Interiors are my weak spot , I feel I have a lot of room for improvement

There is ALWAYS room for improvement, no matter what the task.

This is part of what makes modeling so much fun!

Watching your own progression. ;)

 

My interiors were sorely lacking for many years and I just recently began focusing more attention on them.

They are still not perfect by any stretch, but I feel that they have improved a great deal.

 

 

Steve

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...