Jump to content
Model Cars Magazine Forum

Freightliner FLB 1/25 AMT conversion


Recommended Posts

Thank you for liking the colors guys!

 

Today more colors and a start of the many small details on this FLB.

The weather is still awesome, so i could finish the paint job of the chassis.

Before we take a look on that, first some small details like the small doorwindow frames.

The CTM set contains these frames, but with the FLA and FLB, the lower edges are straight and not rounded.

In this case i had to made them by myself, and file the rounded edges in these polystyrene frames.

Later they will be glued on the outer side of the windows and then you have these frames inside the main window frame.

This is what I'm talking about.

 

Compressed_01.jpg.5ad6fd697fbfe76eaef9395e549feff2.jpg

Compressed_02.jpg.b860f5bc91f90f9b0fddb7c23417de16.jpg

 

A lamp in the back of the cabin, of which the housing is made of an aluminum tube, and in which a transparent glass is placed.

 

Compressed_07.jpg.e08c7a625c252192a85b3a1adafc306f.jpg

 

The next job was to remove the toy looking chrome from several parts like the baby moon covers and some light housings, which later will be attached on the outside of the side deflectors.

 

Compressed_14.jpg.698554d7ff6f3c02392c06223c7892a5.jpg

 

And the first baby moon covers on the modified rear hubs and the rims from Scenes Unlimited which are equipped with the tires of the AMT Papa Truck.

 

Compressed_08.jpg.7c9aaa7a3e2e6fbbc4b901ef16f3e575.jpg

 

Then the side deflectors self, on the inside i made the mounting brackets, and on the outside the last rivets which are glued at the height of these mounting brackets.

If you look good, you can see a small 0,5mm hole in the upper part, after the final paint job the work lights will be attached in these holes.

 

Compressed_15.jpg.4be2f69cbd59564a82c9788afb78932e.jpg

 

I made also a start with the wiring, fisrt I attached these wires on the inside of the chassis before I placed the engine, because these areas are difficult to access when the engine is installed.

 

Compressed_11.jpg.12f7f84d00bc9e90718aaefb6d9d589f.jpg

Compressed_12.jpg.4a9525ca0b48e45d294d87746e4ba45f.jpg

 

Then the stack with cover and some weathering on the top of this stack....

 

Compressed_13.jpg.1c01f9eadd767534b3d355c847922d23.jpg

 

The first headlights in the corners of the housings, these headlights are also from a CTM set.

 

Compressed_09.jpg.80a7a55ef11094f3a9fd0efa17265549.jpg

 

And the top- or roof lights which are from the FLD kit.

 

Compressed_04.jpg.7a69fe622ad622810b0415326d6c9c38.jpg

 

And finally, everything so far together.....

 

Compressed_03.jpg.4c9e48cc60766677e4d1586f78efc35f.jpg

Compressed_05.jpg.0d1c28f6bba3b8c2cc34eba0de06010b.jpg

Compressed_10.jpg.addaefcbcbcfb87c86f8a4fd34105aa8.jpg

Compressed_06.jpg.02642a093517218ce33565bf4ef0231c.jpg

 

Yeah guys, it's getting somewhere, still a lot work to do before this one is completed.

The decals have already been shipped from the USA, I am really excited to receive and view them ...... and to use them of course.B)

See you next time!

 

Hermann.

 

Link to comment
Share on other sites

8 hours ago, 72 Charger said:

Fantastic as usual Hermann I really like the rain cap on the stack. Did you make it or was it from a PE kit

The cap is coming from the big CTM Freightliner detail set, there are 2 rain caps in the set for a double stack.

Even for a FLA or a FLB the set contains enough parts which are useful for these models.

 

Yes guys, the wiring is done now and the moon covers are all attached to the rims.

The last wiring will be the trailer wires which i will attach when the cab is attached on the chassis.

As most of you know, i get my most info from purplewave.com and the following photo was largely my reference point.

6.JPG.bbea22ccc5d9705f8a380e88236a47e6.JPG

Source: purplewave.com

 

And the progress so far with the wiring.....

 

Compressed_01.jpg.cee82e12727df01ee36b1bab330b6654.jpg

Compressed_06.jpg.32f7d45f3e254e44facaccc14fe283a8.jpg

Compressed_08.jpg.f0f072190f79e9a2fb59c8d745ee6d08.jpg

Compressed_09.jpg.4dedc52e37e6782d7b9bff573c478054.jpg

 

The rear lights are also from a CTM set.

 

Compressed_07.jpg.3be729675037e1776c969f4c00e9d0ba.jpg

 

And the air line  from the compressor to the chassis.

This line is made of brass rod, bent it in the right shape, painted in a silver color, and to soften the metallic of the silver, I dry- rubbed it with chrome powder from Ushi vdr Rosten and a cotton swab to give the pipe a really smooth metal look.

 

Compressed_05.jpg.ed98eece14e082518ecb0461d9d65aef.jpg

Compressed_03.jpg.979f8d2313568d2cfc2cb3ea2e8de751.jpg

 

And the last one is a picture of the baby moon covers which I treated with a Molotow chrome marker.

 

Compressed_02.jpg.1c6426ed977e1227bc5836d610a8b122.jpg

 

Now I continue with the cabin, which I still have enough work to do.:rolleyes:

That's it for today and see you next round!

 

Hermann.

 

 

Link to comment
Share on other sites

Dave and Brian, thanks for your enthusiasm!

 

Yeah, at the moment  I have the time by my side,  but I guess I 'm not the only one :lol:, today some progress of small details.

I started with the straps of the fuel tank, for this job I use real Car pin-striping.

I bought this a while ago in an auto parts store, because these are nice vinyl stripes for tank rubbers.

Compressed_19.jpg.01f83eee3edfe9914a917e74d66542f6.jpg

 

In this case I used the widest stripe and put it on a 4mm styreen strip, then cut it with a sharp knife.

 

Compressed_10.jpg.3303fa010c95c6e75a32807fa114c93f.jpg

 

On a spare diesel tank with a bracket which is glued with wood glue, cut the tape with the connector to the right length.

 

Compressed_11.jpg.5a203f8f3688b1c684ed19ad3660e688.jpg

 

In the meantime I had made the connectors of the straps at the upper side and put the tape around this connectors and taped it to the fuel tank.

 

Compressed_12.jpg.d12f44252e6767fb66057dd8c9365b8d.jpg

 

And the last step, glue the CTM  metal tank straps on to the vinyl straps, which is glued with ordinary hobby glue.

 

Compressed_13.jpg.607ec9d867937132f334c3a7be75c3a7.jpg

 

Then some extra detailing of the fifth wheel with a tie rod, which is made of a brass rod.

 

Compressed_14.jpg.80fef8de28ebd099c32554ed553ca87a.jpg

 

The last wiring for the brake lines.....

 

Compressed_16.jpg.756fe20160abf4ed72a46119d48e3712.jpg

 

And the tires treated with ash, to give them a used look.

Compressed_18.jpg.303efbf72219692ba9af7e954def7486.jpg

Compressed_17.jpg.2f3da31804ef50fb5da1c3c6566772b7.jpg

 

And the progress so far.....

 

Compressed_15.jpg.7a2962e8001a23fc97f0a845bab023ff.jpg

 

Yes guys, that's it for today!

 

Hermann.

Link to comment
Share on other sites

16 hours ago, 72 Charger said:

Sweet ! I have used ash for tires before and I thought it was a very convincing look. Those tank straps are da bomb! I am definately going to get some of those CMT parts

Yes Dave, I did this more times with other models, because I find the result very convincing.
On the other hand, I use black shoe polish for the rubber after market tires that are a bit grayish, this also gives a perfect result, I did this on the lowliner tires of the Actros Lowliners.

 

And today the cab has his face.

The headlight units and the headlights are now in it.
For this work I had to remove the paint for a good adhesive surface.
With a rotating blade and a tartar hook that dentists use, I carefully removed the paint.

 

Compressed_0007.jpg.f9cb0e01403617fadce3e9c3682968b7.jpg

 

And the result after holding your breath for a while.:blink:

 

Compressed_0006.jpg.1878f4e8070fc94e228a580c3746de51.jpg

 

Then the first deflector with spotlight.....

 

Compressed_0002.jpg.4b17307dd22b4ecd06e14d0b77139070.jpg

 

And a few fun photos.

 

Compressed_0003.jpg.3d8007e76fd92bc28bf2618ce95d0f04.jpg

Compressed_0005.jpg.1092cdf69694503931130e64f2e9b092.jpg

Compressed_0001.jpg.29f35a3d7e6f14508ddbeab303664547.jpg

 

Now prepare the other side and the rest of the cabin.
For the time being I am quite happy with the result so far.

See you next round.

 

Hermann.

Link to comment
Share on other sites

On 4/18/2020 at 10:31 PM, tbill said:

Beautiful work on this, it does look as though it would run and drive. 

Thank you for the nice compliment  Tom!

 

19 hours ago, 72 Charger said:

Nice the head lights came out looking very realistic

Yes Dave, these headlights are from the CTM set, CTM 24115 US front lights - oblong 1/25

They give the truck a really realistic look.

 

Hermann.

Link to comment
Share on other sites

  • 1 month later...

Hello everyone,

 

On 4/20/2020 at 2:43 PM, gotnitro? said:

Love watching your builds, your very good at explaining every detail and how it's made from common stuff to help other modeler succeed! 

Keep up the amazing work

Thank you Jeff and yeah, you can do a lot with common stuff, it's usually around you and you can use different materials in different ways.
My motto ..... if it doesn't work out the way you want, you can always buy ;)

 

Today some small details that took a lot of time.
First I made the curtains in the cabin out of paper and kept them open in the middle.

It is hardly to see, but it is just fun to know it is.:lol:

 

Compressed_001.jpg.057bdfe2f549cff784f28e9d7539211c.jpg

 

Then glue the door panels inside the cab, and on the outside window the small window frames, which were already made and sprayed, neatly glued on with Clear Weld, what is a transparent glue.

This glue is widely used by aircraft builders to glue transparent parts, what looks like wood glue, and dries transparent.

 

Compressed_004.jpg.57034553f7af89a3649a8ea906dff0c1.jpg

Compressed_000.jpg.f82502f157bcdbb41d5debdaf44c8468.jpg

 

The small window in the door is a 1mm thick transparent part what is clamped in the window frame.

The front shield is a 0,4mm thick transparent part what i cut in half and glued to the center post for the correct angle of the front shield.
At the corners of the windows again a bit of Clear Weld, and the windscreen sits well and tight in the window frame.

And as last, a strip of 1mm hemisphere in the center of the windshield for the finishing touch.

 

Compressed_002.jpg.a2f45e30e5106ec434b998f008dd9425.jpg

 

With the FLA set back I had used the transparent part of the kit, but in this way I find it more convincing and just a bit nicer, yeah.....it's learning all the time.:D

Now i can continue with the rest of the last details for this cab.

I am also awaiting Jerry's decals, I hope to receive them soon.:rolleyes:

 

Compressed_005.jpg.5951eee5a3d0a5239ce850606433d844.jpg

Compressed_003.jpg.3c79447f7b85fc3f02eabf87a477c11b.jpg

 

That's it for today and see you next round!

 

Hermann.

Link to comment
Share on other sites

Thank you guys!

 

On 5/26/2020 at 5:43 PM, chuckyr said:

Your model is just about perfect.  Too bad you didn't use a more interesting livery scheme.

 

 

1684_8618298094525.jpg

Well chucky, at the moment I waiting for the cab decals from Jerry, and for this cab i wanted to have a common "American" color from that period of time, and have some freedom with colors and not pin myself to corporate colors.;)

 

Hermann.

Link to comment
Share on other sites

50 minutes ago, Hermann Kersten said:

Thank you guys!

 

Well chucky, at the moment I waiting for the cab decals from Jerry, and for this cab i wanted to have a common "American" color from that period of time, and have some freedom with colors and not pin myself to corporate colors.;)

 

Hermann.

Nothing more "common" than an American trucking fleet livery!

Edited by chuckyr
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...