Jump to content
Model Cars Magazine Forum

Recommended Posts

I had started this back in March. It was going to be a rusted out, heavily weathered old pick up. I was actually going to make a model with wheels for a change!

I experimented with layering thin layers of paint, for the weathering. I wasn't happy with the way it was turning out and ended up putting the kit away for a few months......

Broke it out a few days ago and decided to make it into a jet truck, what else?

IMG_1491.thumb.JPG.f36570c902ee9ebd8a8e63ddc01e7b44.JPG

I'm not sticking with this color, it will change. Just need to figure out where this whole thing is going to go....Is it a work truck? A delivery truck? Built for speed? I'll be trying to figure out a color scheme for the next few months....I'll probably end up repainting it a few times over.

IMG_1492.thumb.JPG.8cf53cad5f8dcf9b580721f5be7a8664.JPG

I love that fat exhaust

IMG_1493.thumb.JPG.7252a49b4b38d804c893b0c7158c790e.JPG

I'll be replacing the little fins around the 2 rear exhaust. I made these temporary just to see how they looked.

IMG_1494.thumb.JPG.063ab10be87f690748546a881828725b.JPG

For me, the most difficult part of building one of these hover cars, is the action in the wheel wells. It's difficult to find parts that fit into the space and still look as if they preform some kind of function. I used half of a V8 and the air cooled cylinder block of a VW plus some styrene tube to make a V-TOL type take off system. I'll be adding more bits and pieces as I go.  

IMG_1495.thumb.JPG.7370d5fd0cb5f7faa0e89b9629f78d3b.JPG

I still have to figure out what kind of front steering/propulsion I'm going to put on. This is usually the second most difficult part.

 

Thanks for looking. I'll post more as i go.

Share this post


Link to post
Share on other sites
Posted (edited)
12 hours ago, Oldschool4x4 said:

Really like these builds you do! Space on.....

I like them too. I really wanted to make this into a traditional old beater truck. Rusted out, with tools in the back and torn seats. I had it sitting on my desk mocked up on 4 wheels. It looked cool, but I just wasn't excited about it. It sat on my desk for around 5 months and eventually got pushed behind my monitor. 

I started scratch building the big turbines about a week ago for a 71 Hemi that was going to be my next project, but I tried them on the 41 Chevy and they just looked too good.

 

So I need to come up with a clever name for it......

Edited by Daxman
changed word

Share this post


Link to post
Share on other sites

Far. Out.   

Share this post


Link to post
Share on other sites

Thanks guys!!! I'm really enjoying this build.

The original grill that comes with this kit is a large solid chrome piece. No gaps between each of the fins. I attempted to separate them, bad idea! A few of the fins broke off and they were too flimsy. Looks like I'll be scratch building a grill.

IMG_1516.thumb.JPG.a457c58fc9ed5fdd6070db105aff9280.JPG

Right now I'm imagining this truck in a medium 50's green. My daughter suggested a 50's cream. If you've seen my previous builds, this will probably change a few times.

IMG_1515.thumb.JPG.fdc3e0f23f2e0357d79acb076e5c6d3e.JPG

I opened the sides of the hood. I'll need to find something interesting to fill the void. Mechanical pieces, plumbing, wires.

IMG_1525.thumb.JPG.0aed9dcd39c0ffed99e853095ab5fc71.JPG

 

IMG_1518.thumb.JPG.09fe2a20466883ffcf90dd18ea0bd06d.JPGIMG_1520.thumb.JPG.eb57d98598249774b2733574685d8ac7.JPG

Thanks for looking!

Share this post


Link to post
Share on other sites

Looking good Dax !

Maybe a whopping big intake plenum under the hood😎

Share this post


Link to post
Share on other sites

Do you have some separate photos of the Side and rear thrusters before they were installed and painted so I can see how they were constructed? Any help appreciated.

Share this post


Link to post
Share on other sites
Posted (edited)

Thank you all!!!

10 hours ago, Belugawrx said:

Looking good Dax !

Maybe a whopping big intake plenum under the hood😎

I was searching for something interesting that would peek out of the two removed side covers. I really like the idea of big intakes feeding all of the turbines, but I just cant find anything that fits the shape. I need to fill the space with something and the theme is "steampunk junker" So I took 2 rims from a 1/25th semi and wrapped it with styrene. I use the hexagon rod styrene for the bolt heads. The front facing the grill has blades like a turbine. I'll include photos of it later.

IMG_1690.thumb.JPG.493657f6746c3ac4ca486dfa173fbc94.JPG

I experimented with different grills. This one was the best. It's recessed deep and looks aggressive.

IMG_1685.thumb.JPG.ec87b1cd1906d716dacd03e95469c334.JPG

There's rust holes in some of the seams.

IMG_1686.thumb.JPG.42ae80a80d4c8059494b1c09b6f9ff0c.JPG

I've moved the two main thrusters down to give more clearance for the side thrusters and the rear bumper.

IMG_1689.thumb.JPG.760194b73057dca7dc5d275a209f4780.JPG

The fenders, doors and bed are full of dents and dings.

IMG_1682.thumb.JPG.408924055acf0fc43928b2c0f6d1149b.JPG

I lost the hood last weekend! I have searched everywhere. I think I left it under the hood of my daughter's car. It's a long story and I feel like an idiot. I need to purchase another kit. I've searched all the hobby stored here in town and can't find it. I'll probably have to order it.

45 minutes ago, misterNNL said:

Do you have some separate photos of the Side and rear thrusters before they were installed and painted so I can see how they were constructed? Any help appreciated.

I will find and put up a few that I have. I just need to find them on my phone. I have a couple on my PC.

The side thrusters are 1/2 a V8 engine block with a few large diameter styrene tubes attached. You can see the transmission housings facing towards the middle of the car. My son gave me a few of his old Gundam kits when he moved out. If you have any interest in building a hover car, I highly suggest taking parts from your kids Gundam kits. They're never going to build them anyways........

IMG_1691.thumb.JPG.9604a3fb3924ae8ea8eb543137156aa2.JPG

I use wheel rims for the main body of the intake and exhaust. Lots of styrene tube of different diameters.

IMG_1496.thumb.JPG.8f1c820c9db974c7fb38c639e84aea1f.JPGIMG_1497.thumb.JPG.af396fa54e3d39691e1002955f163589.JPGIMG_1498.thumb.JPG.ee8641e52202fc143bf4c0c3724678b6.JPG

Edited by Daxman
added a paragraph

Share this post


Link to post
Share on other sites

Great inspiration and very typical of the help available on the forums. Thanks for sharing your creativity.

Share this post


Link to post
Share on other sites

Here's the two front thrusters and what looks like a generator. The generator goes under the hood. Since I'm removing the sides of the hood, I needed something interesting that could be seen. I was thinking of putting the fuel tank under the hood as I do on most of my hover cars, but that's boring to look at. This fills the void and has a cool Dieselpunk feel to it.IMG_1716.thumb.JPG.d462d5169a894b17ce584265002f9199.JPG

IMG_1722.thumb.JPG.997296dfd9affbb814a9fb0fc0e2766a.JPG

I'm all about vents and intakes. Big turbines gotta breathe. There's a removable cover that goes over the two turbines, but the slats remain open.

IMG_1723.thumb.JPG.3e6825f8414cb2c7f182de14f37e7c9e.JPG

I crammed the area around the turbines with miscellaneous parts. There are suspension parts from a Jeep Wrangler and front bumper headlight bezels from a El Dorado.

IMG_1724.thumb.JPG.1c62a1396154e806bf1c64af148df127.JPG

Remove the cover when you need to make repairs.

1132322411_IMG_1736(2).thumb.JPG.98287db1f5beb8f651559d6bc5acba99.JPG

Here's a photo without the bed.

IMG_1719.thumb.JPG.d1c32a72897a7a4fe576ea2d654da772.JPG

It's still just a mock up, not fully glued. Many of the parts are crooked in the photos.

IMG_1721.thumb.JPG.9ef3ede811862a69755e3577ce49d986.JPGIMG_1725.thumb.JPG.eba9ff8e2cedd3a1e06a41207c663f49.JPG

 

IMG_1731.thumb.JPG.237858b6dc4066ba5b4c188b6b727aa6.JPG

I ordered a new kit from Amazon to replace the hood I lost. It'll be here in a few days. I'll be ready to start painting the body soon after. Thanks for looking!!!!

Share this post


Link to post
Share on other sites

Another great build Dax.

Share this post


Link to post
Share on other sites

The new under hood and bed features really balance nicely. Outstanding overall.

Share this post


Link to post
Share on other sites

I painted it with Vallejo Air Red 71.003 RLM23 two nights ago and started the weathering last night. I'll be adding more.IMG_1928.thumb.JPG.41955e8d5645aceae0cc64f14c498404.JPG

I hope to add more hoses and hopefully some realistic looking wire harnesses.

IMG_1929.thumb.JPG.d625dab457a4664910cbc81bfdb2b202.JPG

I haven't weathered the visor enough yet. Not sure that I'm going to keep it red.

IMG_1931.thumb.JPG.ba33d4cbb756ac29f63e8dd173df223a.JPG

IMG_1933.thumb.JPG.91246632c6c17ddfa5910784d87f7252.JPG

I changed the rear turbines to match the front more closely. Much better!

IMG_1934.thumb.JPG.b84153b32c01342f4260e0308e24e685.JPG

I will probably do more weathering on the bed. The vents and the access panels might look good in bare steel or gun metal.

IMG_1935.thumb.JPG.4f0270d337857f00c5a9ecda5b5a77cc.JPG

Share this post


Link to post
Share on other sites

Your weathering skills are top notch!  Might be the best I've seen.

Share this post


Link to post
Share on other sites

I added some more details. Under the rear wheel wells, I added half a supercharger. It gave some needed bulk to the rear side thrusters.

IMG_1986.thumb.JPG.9468150d28cbab84eb3544ee54207cd7.JPG

I'm really happy with the hood side cutouts. I used the piece that was removed and added some thin styrene to create the intake grill.

IMG_1989.thumb.JPG.f976f962507ce0c1acacb15eaff1bfc9.JPG

I love the grill on this truck.

IMG_1991.thumb.JPG.35a77352e9e86787896ad9e10cd659cc.JPG

 

IMG_1993.thumb.JPG.02e99ced286b2df58d0f3cbd4c60e850.JPG

I plan to fit a lot of hoses under there.

IMG_1997.thumb.JPG.b2282eb62eed4eb21e3c0479e73eda87.JPG

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...