7000in5th Posted August 20, 2019 Share Posted August 20, 2019 The Hum3D website has hundreds of 3D programs for cars. You can buy this 2020 Corvette 3D print-ready for 300 Euros. https://hum3d.com/3d-models/chevrolet-corvette-c8-2020/?utm_source=newsletter&utm_medium=email&utm_campaign=Aug-20-2019 Has anyone tried to print a Hum3D car? I realize it is a complex project but being the first to sell a new car, even if it is a hollow lump with closed windows would seem to have some selling potential. For 600 euros, you can get a detailed interior. Quote Link to comment Share on other sites More sharing options...
wrenchr Posted August 20, 2019 Share Posted August 20, 2019 (edited) Sounds like a lot of money. I'd hold out for someone to produce one in plastic or resin first. Edited August 20, 2019 by wrenchr Quote Link to comment Share on other sites More sharing options...
Jhedir6 Posted August 21, 2019 Share Posted August 21, 2019 Cool but no thanks. I'll wait for a plastic kit. I'm sure Revell will do this if they can get the licencing from GM. IF they can, please, please, please, someone tackle them and get them to start doing their kits in 1/24 like everyone else. I'd also like to see them do the new GT500 as well, but would rather see Tamiya do it. They've got an in with Ford it seems, the GT and the GT4 Mustang in 1/10 (still thing they should of put that out in 1/24) so maybe they can get the GT500 into production. Regardless of who does the C8, and I'm sure someone will, 300 Euros is insane. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted August 21, 2019 Share Posted August 21, 2019 Thanks for posting. Quote Link to comment Share on other sites More sharing options...
Dale Gribble Posted August 23, 2019 Share Posted August 23, 2019 (edited) On 8/20/2019 at 7:05 PM, Jhedir6 said: Cool but no thanks. I'll wait for a plastic kit. I'm sure Revell will do this if they can get the licencing from GM. IF they can, please, please, please, someone tackle them and get them to start doing their kits in 1/24 like everyone else. I'd also like to see them do the new GT500 as well, but would rather see Tamiya do it. They've got an in with Ford it seems, the GT and the GT4 Mustang in 1/10 (still thing they should of put that out in 1/24) so maybe they can get the GT500 into production. Regardless of who does the C8, and I'm sure someone will, 300 Euros is insane. You say it like 1/24 and 1/25 are such a huge difference . It’s not like comparing 1/43 to 1/8 .... Edited August 23, 2019 by Dale Gribble Quote Link to comment Share on other sites More sharing options...
my66s55 Posted August 23, 2019 Share Posted August 23, 2019 To answer your questions. Yes, it can be 3d printed. Yes, I have printed Hum 3d cars. I only pay the minimum for them , make them 3d printabe and print them out on one of my 3d resin printers. Quote Link to comment Share on other sites More sharing options...
DiscoRover007 Posted August 24, 2019 Share Posted August 24, 2019 On 8/20/2019 at 8:05 PM, Jhedir6 said: Cool but no thanks. I'll wait for a plastic kit. I'm sure Revell will do this if they can get the licencing from GM. IF they can, please, please, please, someone tackle them and get them to start doing their kits in 1/24 like everyone else. I'd also like to see them do the new GT500 as well, but would rather see Tamiya do it. They've got an in with Ford it seems, the GT and the GT4 Mustang in 1/10 (still thing they should of put that out in 1/24) so maybe they can get the GT500 into production. Regardless of who does the C8, and I'm sure someone will, 300 Euros is insane. Agreed 100% I think Tamiya or Revell will release the new vet and I pray it’s 1/24 also. People don’t think it’s a big difference between 1/25 but I disagree. You lose potential in detail and at 1/25 you get into a toylike appearance. Quote Link to comment Share on other sites More sharing options...
DiscoRover007 Posted August 24, 2019 Share Posted August 24, 2019 On 8/23/2019 at 9:31 AM, Dale Gribble said: You say it like 1/24 and 1/25 are such a huge difference . It’s not like comparing 1/43 to 1/8 .... It’s big enough in my opinion. I know others don’t share that opinion but 1/24 has a better scale appearance when it comes to the final assembly and finish of a model. 1/25 also makes an odd display next to the 1/24 standard of most models these days Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted August 25, 2019 Share Posted August 25, 2019 (edited) On 8/23/2019 at 6:31 AM, Dale Gribble said: You say it like 1/24 and 1/25 are such a huge difference . It’s not like comparing 1/43 to 1/8 .... Some subjects will be more noticeable than others, but yes, there is difference between the two scales, and I am with David, 1/24th for all new tooling moving forward from Revell. Edited August 25, 2019 by martinfan5 Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted August 25, 2019 Share Posted August 25, 2019 On 8/20/2019 at 3:04 PM, 7000in5th said: The Hum3D website has hundreds of 3D programs for cars. You can buy this 2020 Corvette 3D print-ready for 300 Euros. https://hum3d.com/3d-models/chevrolet-corvette-c8-2020/?utm_source=newsletter&utm_medium=email&utm_campaign=Aug-20-2019 Has anyone tried to print a Hum3D car? I realize it is a complex project but being the first to sell a new car, even if it is a hollow lump with closed windows would seem to have some selling potential. For 600 euros, you can get a detailed interior. What do I get for the $75? Is it like a curbside model? Does it come painted or can I paint it later? Quote Link to comment Share on other sites More sharing options...
my66s55 Posted August 25, 2019 Share Posted August 25, 2019 29 minutes ago, Len Woodruff said: What do I get for the $75? Is it like a curbside model? Does it come painted or can I paint it later? You get a CAD file exactly as you see it in the op's post. There is no color unless the 3d medium has it. Outside of a solid peace, it's not 3d printable. Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted August 25, 2019 Share Posted August 25, 2019 2 minutes ago, my66s55 said: You get a CAD file exactly as you see it in the op's post. There is no color unless the 3d medium has it. Outside of a solid peace, it's not 3d printable. Thanks. I was hoping to get a 3D printed model. I can't do anything with a CAD file myself. Quote Link to comment Share on other sites More sharing options...
Lownslow Posted September 7, 2019 Share Posted September 7, 2019 I thought about rendering it but ill wait till the rocket bunny version Quote Link to comment Share on other sites More sharing options...
7000in5th Posted September 10, 2019 Author Share Posted September 10, 2019 On 8/23/2019 at 12:57 PM, my66s55 said: To answer your questions. Yes, it can be 3d printed. Yes, I have printed Hum 3d cars. I only pay the minimum for them , make them 3d printable and print them out on one of my 3d resin printers. Thanks for your response, do you have photos of any prints? Quote Link to comment Share on other sites More sharing options...
my66s55 Posted September 10, 2019 Share Posted September 10, 2019 40 minutes ago, 7000in5th said: Thanks for your response, do you have photos of any prints? 37 F & F Delehaye 135 & 57 DeSoto front fenders and bumper. Prints have not had all of the supports removed. Quote Link to comment Share on other sites More sharing options...
7000in5th Posted September 7, 2022 Author Share Posted September 7, 2022 (edited) Four model years old and nothing yet? Are the big guys waiting for the Z06? Nothing by anyone in 3D? Edited September 7, 2022 by 7000in5th correct spelling 1 Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted September 7, 2022 Share Posted September 7, 2022 There is a person in the 3D Model Facebook page that is working on a full detailed version. Currently he has the body that started for slot car racing. Quote Link to comment Share on other sites More sharing options...
7000in5th Posted September 7, 2022 Author Share Posted September 7, 2022 1 hour ago, Len Woodruff said: There is a person in the 3D Model Facebook page that is working on a full detailed version. Currently he has the body that started for slot car racing. Thanks, Len. What is the exact name of the Facebook page? I didn't find a page named "3D Model". Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted September 7, 2022 Share Posted September 7, 2022 4 minutes ago, 7000in5th said: Thanks, Len. What is the exact name of the Facebook page? I didn't find a page named "3D Model". Try 3d Scale Cars on Facebook. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.