iamsuperdan Posted November 12, 2019 Share Posted November 12, 2019 I can't even believe I'm posting this. Really not happy with how this turned out, so maybe I'm just posting as a warning to others. This is a horrible kit. The instructions are ridiculously vague about placement of everything. Fuel tanks, battery box, side fairings, everything. Very little fit correctly, and it took an insane amount of test fitting, shaving, more test fitting, trimming, repeat, etc. This is the sort of kit, that when given to a child as a present, it killed their excitement for the hobby, and made them turn to video games. I know, I didn't paint the Kenworth emblems. Also missing the headlights. Joys of buying an old second hand kit I guess. From what I've seen here and online, I think I might be the first person to ever build it using the Canepa hubcaps. ? I also have an original issue Kenworth W925 on the bench, 70s issue I believe, and it's surprising how much of that kit is in this newer kit. Almost the entire chassis, the engine, tanks, battery, most of the interior. Almost completely interchangeable. In fact, if the W925 kit didn't have the rear torsion bar suspension, I daresay I could have swapped the bodies between the two with no problems. And the instructions are slightly better too. I have the standard T600A in the stash. Not sure how badly I want to build that one now. Anyway, here is what a year of on/off cursing and building ended up like. The trailer is the Moebius 53ft, built a year or so ago. Went together perfectly. Quote Link to comment Share on other sites More sharing options...
Jim B Posted November 12, 2019 Share Posted November 12, 2019 Looks pretty good. There has been a lot of complaints over the years about these T600 kits. Essentially it's a T600 cab/hood/sleeper on the W925 frame & engine. Quote Link to comment Share on other sites More sharing options...
grodudulle77 Posted November 12, 2019 Share Posted November 12, 2019 Nice look with the dry van trailer ! ??? Quote Link to comment Share on other sites More sharing options...
tbill Posted November 12, 2019 Share Posted November 12, 2019 Looks pretty good to me! Having built this insanely aggravating kit myself , I feel your pain, what made my situation worse, is I built the amt tanker to go with it.....double dose of aggravation, lol. Quote Link to comment Share on other sites More sharing options...
CRUSADER2 Posted November 12, 2019 Share Posted November 12, 2019 Everything looks clean and straight to me, well worth all the hours and effort you put in, trailer looks good too, great work!!! Quote Link to comment Share on other sites More sharing options...
Force Posted November 13, 2019 Share Posted November 13, 2019 11 hours ago, iamsuperdan said: I can't even believe I'm posting this. Really not happy with how this turned out, so maybe I'm just posting as a warning to others. This is a horrible kit. The instructions are ridiculously vague about placement of everything. Fuel tanks, battery box, side fairings, everything. Very little fit correctly, and it took an insane amount of test fitting, shaving, more test fitting, trimming, repeat, etc. This is the sort of kit, that when given to a child as a present, it killed their excitement for the hobby, and made them turn to video games. I know, I didn't paint the Kenworth emblems. Also missing the headlights. Joys of buying an old second hand kit I guess. From what I've seen here and online, I think I might be the first person to ever build it using the Canepa hubcaps. ? I also have an original issue Kenworth W925 on the bench, 70s issue I believe, and it's surprising how much of that kit is in this newer kit. Almost the entire chassis, the engine, tanks, battery, most of the interior. Almost completely interchangeable. In fact, if the W925 kit didn't have the rear torsion bar suspension, I daresay I could have swapped the bodies between the two with no problems. And the instructions are slightly better too. I have the standard T600A in the stash. Not sure how badly I want to build that one now. I built this kit several years ago, sometime in the mid 90's. and I don't remeber any big issues with the kit, it's kind of regular AMT old truck kit, the instructions hasn't been a strongpoint for AMT as they can be quite vague. It's not a big surprise that the chassis and drivetrain looks the same, they are the same as the T600 is based on the old W925, the difference may be if your kit has the early torsion bar suspension wich was replaced with the walking beam quite early, otherwise everything is the same...so it's not really correct for the more modern T600. I don't see anything wrong with your model and I think you did a good job on it. Quote Link to comment Share on other sites More sharing options...
Bills72sj Posted November 13, 2019 Share Posted November 13, 2019 Yours seems to present well. The only problem I remember when I built mine was the hood doesn't open very far. Note: mine is not the Canepa version though I do have that one partially built. Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted November 13, 2019 Author Share Posted November 13, 2019 You're right about the hood. I didn't even bother finishing the engine (hoses, etc) because the hood doesn't even open halfway. Besides, it's not like I'll display with the hood open, so it wasn't a big deal for me. Thanks everyone! Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted November 13, 2019 Share Posted November 13, 2019 Nice looking rig! Great work!! Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted November 13, 2019 Share Posted November 13, 2019 I think it looks real good ........ I did T600 many years ago I found out the side skirts are to short other then that it went together just ok . Quote Link to comment Share on other sites More sharing options...
Hermann Kersten Posted November 14, 2019 Share Posted November 14, 2019 Despite the setbacks and in my opinion, not the most beautiful KW, you show us here a very well built model. Hermann. Quote Link to comment Share on other sites More sharing options...
TECHMAN Posted November 16, 2019 Share Posted November 16, 2019 ??? Looks like you did a VERY decent job on this one.... I'm like Hermann, I am not quite as fond of the design as I am of the earlier KW's, but your's looks like a bunch of them I see running up and down I-20..... Back to the original statement..... Very decent job on the build. DJ Quote Link to comment Share on other sites More sharing options...
PierreR89 Posted November 17, 2019 Share Posted November 17, 2019 Nice. I have to admit that after seeing this and the other T600 posted i got inspired to build my own. Only have the front framehalf and engine completed for it but its atleast something. Quote Link to comment Share on other sites More sharing options...
slusher Posted December 1, 2019 Share Posted December 1, 2019 Looks great to me, we are our own worse critics... Quote Link to comment Share on other sites More sharing options...
Dutzie Posted May 26, 2020 Share Posted May 26, 2020 All the pain and suffering and you still created a beautiful model. Nice work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.