kpnuts Posted December 28, 2019 Share Posted December 28, 2019 Hi all I got this from my missus for Christmas. I must say for a revell kit I'm very disappointed, it's the worst kit I've had in ages, look at the deformation of the windscreen surround for starters. I've never seen a kit with so many sink mark's or crackling of the surface of the plastic. And this is the first part I've looked at some of the sink marks are in very awkward places. Not a very encouraging start. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted December 29, 2019 Share Posted December 29, 2019 Revell has great subject matter, but these sink holes etc are ridiculous. I’ve put my Revell 1/16 Porsche 356 coupe back in the box for now because of the amount of bodywork it’s required. Looking forward to seeing your progress. Ben Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 12, 2020 Author Share Posted January 12, 2020 Hi all I've sorted the sink marks and the windscreen surround (it's still a bit warped but when the windscreen is added it trues up nicely Did some work on the engine, the rocker cover springs are moulded as just a plastic tab so I cut it off and made them, lots more detailing to do. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 12, 2020 Author Share Posted January 12, 2020 Quote Link to comment Share on other sites More sharing options...
drodg Posted January 13, 2020 Share Posted January 13, 2020 I built the coupe this past December and just built it without dealing with the sinkholes. I have to say that is really disappointing considering the price of the kit. Especially the Cabriolet. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 17, 2020 Author Share Posted January 17, 2020 Hi all well i wanted to add the throttle linkages and cold starting system but comparing the engine at work with this one, I got to thinking it's nothing like the real thing so I took it into work and asked our engineers and none of them have seen tinware on a 356 Porsche like the one depicted in this kit (baring in mind they only restore classic porsche here) so I cut all the excess tinware off. Here is what's in the kit. Heres a pic of the engine out of the 356 C Cabriolet So after I cut off the excess tinware I ended up with this I also wanted to add the low and high tension leads to the coil but when i tried there was no room under it to add them so I thought I will just move it up but then i thought it may have knock on problems later on so I measured it and it should be 8.75 mm the kit supplied one is 10.5mm so it's too long, after the last few revell kits (which I raved about how good they were I'm very disappointed in this one) I also added the leads from the dynamo. Loads more details could be added to this kit (I dont havevthe skills so I wont be) the 2 stumps either side of the engine with the 2 holes in the top are supposed to be the inlet manifolds and carbs (I may try to make some rudimentary ones but since when in the car they wont be seen at all who knows. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted January 19, 2020 Share Posted January 19, 2020 Looks ace! Ben Quote Link to comment Share on other sites More sharing options...
Bugatti Fan Posted January 19, 2020 Share Posted January 19, 2020 Your Porsche has certainly been a Labour of love Ken judging by the number of flaws that you had to correct on a lot of this size, and a credit to your modelling ability. I would have not expected a lot like this to be so troublesome considering the cost. Ken, are you a member of IPMS UK? If so can you message me either on this forum's message service or on the IPMS one of you are a member. Cheers! Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 19, 2020 Author Share Posted January 19, 2020 Hi all well I've added the throttle linkages the fuel lines and the cold start valve (I know none of this will be visible when the body is on but hey keeps me out of the pubs and away from those loose women) Loads more needs correcting, I hope this is not a sign of things to come from revell, this kit was only released in 2018 I've really enjoyed the previous revell kits I've built, I even sang their praises not so with this kit though. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 24, 2020 Author Share Posted January 24, 2020 Hi all well I've decided on the colour, black does look great. Guess what I've discovered the body is warped sideways as well One step forward 2 back. The instructions would have you paint the carpet black, I was going to go by this website http://derwhites356literature.com/Porsche356Colors.html For colour combos but as you can see they say black had carpets of green or red Well here are some pics of the actual car we have in the workshop. So that's what I'm going for The carpet has a ribbed effect which I will try to duplicate with dry brushing some darker grey over this. Quote Link to comment Share on other sites More sharing options...
Gramps46 Posted January 24, 2020 Share Posted January 24, 2020 Thank you for sharing this build with us. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted January 24, 2020 Share Posted January 24, 2020 Coming along nicely. Ben Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 26, 2020 Author Share Posted January 26, 2020 Hi all next update and we have some colour, first coat of many. A little explanation before I mention what happened next I built a shed in the garden for spraying my models as the misses refused to allow painting in the new house (that's fine I can understand that) unfortunately we have a hot tub which we need to take down in the winter so with the new house theres no room to store it so where is it stored, you guessed it, in the shed so now guess what, yep I cant spray in the shed as swmbo says she doesn't want spray dust all over the hot tub. Spraying outside the shed door got the body sprayed started spraying the other panels and it started to rain, by the time I got it all in the shed all the other panels had at least one rain drop on them. They all have to be sanded down and done again. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 29, 2020 Author Share Posted January 29, 2020 Did some work on the leather seats (used a bit of artistic licence, the seats the cars that I see tend to be immaculate since they have been lovingly restored) but I'm thinking this has been lovingly owned from new so the leather has some ware) ( you have to give me some Lee way as I tend to like to weather things hard) I do find it really hard making things new and pristine when my natural bent is to add weathering but I think this is a realistic depiction of looked after 50 yr old leather. Quote Link to comment Share on other sites More sharing options...
drodg Posted January 29, 2020 Share Posted January 29, 2020 On 1/26/2020 at 1:15 PM, kpnuts said: Hi all next update and we have some colour, first coat of many. A little explanation before I mention what happened next I built a shed in the garden for spraying my models as the misses refused to allow painting in the new house (that's fine I can understand that) unfortunately we have a hot tub which we need to take down in the winter so with the new house theres no room to store it so where is it stored, you guessed it, in the shed so now guess what, yep I cant spray in the shed as swmbo says she doesn't want spray dust all over the hot tub. Spraying outside the shed door got the body sprayed started spraying the other panels and it started to rain, by the time I got it all in the shed all the other panels had at least one rain drop on them. They all have to be sanded down and done again. Great job on this, I built the coupe this past fall. Your engine looks great and much better than mine. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted January 30, 2020 Author Share Posted January 30, 2020 Thanks, glad you liked it Quote Link to comment Share on other sites More sharing options...
kpnuts Posted February 4, 2020 Author Share Posted February 4, 2020 Hi all got some of the interior done, really pleased with the dashboard. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted February 5, 2020 Author Share Posted February 5, 2020 More work done on the Porsche, sticking some of the chrome bits on (hope I can straighten the bodywork out! I think I can) quite pleased with paintwork has a nice shine to it. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted February 8, 2020 Author Share Posted February 8, 2020 Right well this is now going to be buried in the deepest part of my stash, I am more than a little peed off After heroic efforts to sort the warped body (you may think this clamp is over kill but I assure you its not) Great all looked to be ok then I moved to sort the front out you cant get the the wheel arches under the wings (wont go high enough) And look how high the bonnet is That fitted perfectly till I started pushing the body up to get the wheel arches under the wings (imagine how high it would be if I managed to get the wheel arches under the wings) of course now (due to the use of the clamp the body is really stuck in the middel) how this hasn't been hurled across the room I dont know. More than a little peed off. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted February 8, 2020 Share Posted February 8, 2020 I feel your pain. I love Revell’s subject matter, but the kits are terrible lately. I’ve got the coupe back in it’s box. I’m studying currently, so I’ve gone back to building mostly out of box. It’s one reason I just build the current Tamiya kits. Ben Quote Link to comment Share on other sites More sharing options...
kpnuts Posted February 9, 2020 Author Share Posted February 9, 2020 It was the locating tabs at the front which were the problem I cut both the female and Male parts off of the front 4 and its sorted the problem, the problem, with the bonnet I added some plasticard under the hinges which lowered the bonnet so it's now a flush fit. Quote Link to comment Share on other sites More sharing options...
ZTony8 Posted February 9, 2020 Share Posted February 9, 2020 I noticed that there's a 1/16 snap version of the 356 coupe available from Revell. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted February 9, 2020 Share Posted February 9, 2020 2 hours ago, ZTony8 said: I noticed that there's a 1/16 snap version of the 356 coupe available from Revell. Great subject. But the body isn’t I’ll of sink holes, and fit issues. Ben Quote Link to comment Share on other sites More sharing options...
kpnuts Posted February 20, 2020 Author Share Posted February 20, 2020 Hi all well theres no detail underneath, no brake lines, no shock absorbers, no back panel to the brakes, no calipers on the front after a lot of deliberation (is this kit really worth all this effort) I've decided it is, so here are pics of what the kit supplies. Hopefully I can improve on this. Unfortunately the car i was basing this on is no longer in the workshop but we have a coupe in and our engineers assure me the brakes and suspension are the same so more measures and research (I've bought a vernier for the measurements) I must say I'm very disappointed with this kit even without the moulding problems they really dropped the ball with this kit all the other German produced kits I've done were amazing (I would have put them up with Tamiya) this kit I would say is below Frog standards, which is a shame, I hope this is not a glimps of things to come, considering this is a 2018 new moulding. I will certainly think very carefully before buying another revell kit and I certainly wont be recommending revell kits in the near future. Quote Link to comment Share on other sites More sharing options...
Bennyg Posted February 22, 2020 Share Posted February 22, 2020 I 100% agree. I love Revell’s subject matter, it’s just let down by poor execution. It’s one reason I’m going back to sticking to Tamiya car kits. Ben Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.