Dave Toups Posted January 23, 2020 Share Posted January 23, 2020 I am having a hard time finding Plastikote sandable primer. NONE of the local auto parts stores carry it any more. All anybody has is Duplicolor which I don't like to use. Valspar still lists it on their website, so I assume they still make it, but it's nearly impossible to find. Does anyone know of a source (besides Amazon) where I can buy this stuff? Quote Link to comment Share on other sites More sharing options...
Snake45 Posted January 23, 2020 Share Posted January 23, 2020 At one time they had a Store Locator feature on their website, but I just went there and couldn't find it now, but you might have better luck. You might have to resort to ordering it by internet. Yah, I know, a big PITA to buy paint this way, but sometimes ya gotta do whatcha gotta do. Quote Link to comment Share on other sites More sharing options...
SfanGoch Posted January 23, 2020 Share Posted January 23, 2020 I just got off the phone with Valspar customer service. The Plastickote line was discontinued; however, "We do produce Krylon products which are just as good." Quote Link to comment Share on other sites More sharing options...
Dave Toups Posted January 23, 2020 Author Share Posted January 23, 2020 7 minutes ago, SfanGoch said: I just got off the phone with Valspar customer service. The Plastickote line was discontinued; however, "We do produce Krylon products which are just as good." Yeah, right! I've never had any luck with Krylon paints or primers on models. I know a lot of folks like Duplicolor, but I've always found it to be much "hotter" than Plastikote and it doesn't seem to wet sand as well either. Quote Link to comment Share on other sites More sharing options...
Dave Toups Posted January 23, 2020 Author Share Posted January 23, 2020 19 minutes ago, Snake45 said: At one time they had a Store Locator feature on their website, but I just went there and couldn't find it now, but you might have better luck. You might have to resort to ordering it by internet. Yah, I know, a big PITA to buy paint this way, but sometimes ya gotta do whatcha gotta do. I just ordered some from Amazon. The single cans they had listed were out of stock, so I had to buy 6 cans! I'll never use that much. lol Quote Link to comment Share on other sites More sharing options...
935k3 Posted January 23, 2020 Share Posted January 23, 2020 Note: the new stuff says enamel. I was able to stock some of the old stuff at $1 at clearance store a few years ago. Enamel does not make a good primer because it tears more then feather edges when sanding. I would not touch enamel for primer any day. Duplicolor is good but it is much hotter, the sanding sealer especially so. Quote Link to comment Share on other sites More sharing options...
SfanGoch Posted January 23, 2020 Share Posted January 23, 2020 I use Krylon ColorMaster Paint/Primers and Straight primers and have had good results. I also like Mr. Primer Surfacer sprays. Both provide a nice level surface. Another option is Badger Stylinrez primers. They are polyurethane resin based. I recently started using them and am very impressed with their durability and self-leveling properties. Quote Link to comment Share on other sites More sharing options...
Plowboy Posted January 23, 2020 Share Posted January 23, 2020 If the can has Plasti Kote by Valspar on it, you just wasted your money. I ordered a can and it was useless! The most I got out of it at one time was enough to primer an engine/trans. It had dried up junk in it that kept clogging the nozzle. After cleaning the nozzle and receptacle for the umpteenth time, I gave up and threw it in the trash! On top of that, it took forever to dry. There was nothing Plasti Kote about it! Quote Link to comment Share on other sites More sharing options...
Dave Toups Posted January 23, 2020 Author Share Posted January 23, 2020 I hope I didn't waste my money! We'll see when I get it and try it out. I noticed they list two different primers Sandable Automotive (What I bought) and something called "Essential Primer". I have no idea what that is. I really like Tamiya primer, but I'm a little worried about using it under automotive lacquers (like MCW). Same with Stynylrez. That's a water-based primer and that's usually a no-no under solvent based paints. Has anyone tried "body shop" primers like SEM or UPol? Quote Link to comment Share on other sites More sharing options...
Plowboy Posted January 23, 2020 Share Posted January 23, 2020 I hope you didn't either. But, that was my experience with it. I thought my beloved Plasti Kote was back! It was anything but! I think it was Valspar's formula in the Plasti Kote can with by Valspar added. It sure acted like enamel. So, I would be very hesitant to spray any lacquer paint over it. I now only use Tamiya on bodies and Dupli Color on everything else. Quote Link to comment Share on other sites More sharing options...
thatz4u Posted January 23, 2020 Share Posted January 23, 2020 I like Tamiya primer, works like the old plastikote in my opinion, have used both the grey & white... Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted January 24, 2020 Share Posted January 24, 2020 I agree that the Plastikote primer was the best, but since it's not been available for a long time, I've made due with Duplicolor sandable primer. Quote Link to comment Share on other sites More sharing options...
Dave Toups Posted January 24, 2020 Author Share Posted January 24, 2020 Well....my order hadn't shipped yet, so I've tried to cancel it. If that doesn't work, I'll be out the $36. Thanks to everyone for the heads-up. I should have waited a bit before I pulled the trigger, oh well. I appreciate the suggestions. I love Tamiya primer, I'm just worried about how it'll hold up under automotive paints like MCW, Scale Finishes, Zero Paints, etc. All those companies make their own primers, but I like the convenience of a spray bomb for primer. This looked interesting. Has anyone tried it? https://www.semproducts.com/product/high-build-primer-surfacer Quote Link to comment Share on other sites More sharing options...
slusher Posted January 24, 2020 Share Posted January 24, 2020 8 hours ago, SfanGoch said: I just got off the phone with Valspar customer service. The Plastickote line was discontinued; however, "We do produce Krylon products which are just as good." I gave up the chase a couple years ago and use Tamiya primer only now. i do use Krylon and Rustoleum paint some.... Quote Link to comment Share on other sites More sharing options...
935k3 Posted January 24, 2020 Share Posted January 24, 2020 18 minutes ago, Dave Toups said: Well....my order hadn't shipped yet, so I've tried to cancel it. If that doesn't work, I'll be out the $36. Thanks to everyone for the heads-up. I should have waited a bit before I pulled the trigger, oh well. I appreciate the suggestions. I love Tamiya primer, I'm just worried about how it'll hold up under automotive paints like MCW, Scale Finishes, Zero Paints, etc. All those companies make their own primers, but I like the convenience of a spray bomb for primer. This looked interesting. Has anyone tried it? https://www.semproducts.com/product/high-build-primer-surfacer Dave I would not use any high build as it will cover details Quote Link to comment Share on other sites More sharing options...
Rodent Posted January 24, 2020 Share Posted January 24, 2020 My LHS is now charging $14 for Tamiya primer. It's great for some things, but doesn't work well over sanding or filler. I prefer a sandable primer when it's needed, Tamiya when it isn't. Quote Link to comment Share on other sites More sharing options...
slusher Posted January 24, 2020 Share Posted January 24, 2020 10 hours ago, Plowboy said: I hope you didn't either. But, that was my experience with it. I thought my beloved Plasti Kote was back! It was anything but! I think it was Valspar's formula in the Plasti Kote can with by Valspar added. It sure acted like enamel. So, I would be very hesitant to spray any lacquer paint over it. I now only use Tamiya on bodies and Dupli Color on everything else. Roger, what do you put under Dupli Color, man that stuff is hot? Quote Link to comment Share on other sites More sharing options...
Plowboy Posted January 24, 2020 Share Posted January 24, 2020 (edited) 9 hours ago, slusher said: Roger, what do you put under Dupli Color, man that stuff is hot? Nothing. I use the Perfect Match line of primer and paint. Edited January 24, 2020 by Plowboy Quote Link to comment Share on other sites More sharing options...
LL3 Model Worx Posted January 24, 2020 Share Posted January 24, 2020 I found some at Ollie's last week... along with a few cans of paint. Also got some quart cans of duplicolor "paint shop" lacquer for $7 a quart! Good score. Quote Link to comment Share on other sites More sharing options...
Plowboy Posted January 24, 2020 Share Posted January 24, 2020 13 hours ago, Rodent said: My LHS is now charging $14 for Tamiya primer. It's great for some things, but doesn't work well over sanding or filler. I prefer a sandable primer when it's needed, Tamiya when it isn't. My experience has been the exact opposite. I spray a single coat over bodies/filler that have been sanded with 400 grit. I then sand with 600, spray 2-3 coats and sand with 1000. Tamiya primer is as sandable as any out there. Quote Link to comment Share on other sites More sharing options...
GMP440 Posted January 26, 2020 Share Posted January 26, 2020 Duplicolor and Plasticote are the same product. Lot of places have dropped the Plasticote line and have Duplicolor. Oreilley's, Advance, Pep Boys, Autozone and Bennett have the Duplicolor line. Duplicolor has a sandable primer and it's very good. A lacquer based primer so you can put any paint on top of it. Quote Link to comment Share on other sites More sharing options...
Classicgas Posted January 26, 2020 Share Posted January 26, 2020 On 1/23/2020 at 1:44 PM, Dave Toups said: I hope I didn't waste my money! We'll see when I get it and try it out. I noticed they list two different primers Sandable Automotive (What I bought) and something called "Essential Primer". I have no idea what that is. I really like Tamiya primer, but I'm a little worried about using it under automotive lacquers (like MCW). Same with Stynylrez. That's a water-based primer and that's usually a no-no under solvent based paints. Has anyone tried "body shop" primers like SEM or UPol? We have SEM at work, do not use it on plastic!!!!! Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 26, 2020 Share Posted January 26, 2020 (edited) 14 hours ago, GMP440 said: Duplicolor and Plasticote are the same product. No, they are not. They never were, either. PlastiKote was the go-to primer for over 20 years specifically because it was different from anything else available...not as hot as Duplicolor, but just as good a barrier, and easy-sanding. It's been reformulated at least twice fairly recently, and the "new, better" stuff is just cheap garbage, the result of bean-counters meddling with something they didn't understand and nothing at all like the product that veteran builders came to love. Edited January 26, 2020 by Ace-Garageguy Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted January 26, 2020 Share Posted January 26, 2020 1 hour ago, Classicgas said: We have SEM at work, do not use it on plastic!!!!! Generally good advice. SEM is very hot. HOWEVER...my own testing has shown that it works fine on some kit plastics, but causes grief on others. This is black self-etching SEM on a very solvent-resistant early ('61) Johan Dodge. No crazing, excellent adhesion, and flowed out very well. Quote Link to comment Share on other sites More sharing options...
GMP440 Posted January 26, 2020 Share Posted January 26, 2020 From a previous post: "No, they are not. They never were, either. PlastiKote was the go-to primer for over 20 years specifically because it was different from anything else available...not as hot as Duplicolor, but just as good a barrier, and easy-sanding." I've used both products for many years, the statement that one is hotter than the other. Not true. I do agree with you that both are a good barrier and sand easily. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.