PLASTIC FANTASY Posted February 12, 2020 Share Posted February 12, 2020 I have an assembly question for the MPC 1975 Camaro kit. I am planning on building the stock car version and I am missing the instructions. It looks like the chassis has two circular indentations on each side to locate the bottom of the roll cage. The roll cage looks like it will bow out beyond the chassis’s sides. I assume the body sides have to be spread to fit over the cage? I believe the 70-76 Camaro and Firebird kits all have the same basic stock car parts. Does anyone have a copy of any of these instructions showing body assembly to the chassis as the stock car version that they can share? Quote Link to comment Share on other sites More sharing options...
MyBradKeselowski Posted February 12, 2020 Share Posted February 12, 2020 I have the MPC 76 Camaro still sealed but I can open it up and look at the instructions. I think the 76 Camaro has the racing version also so the instructions for the 75 and 76 should be about the same. Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted February 12, 2020 Share Posted February 12, 2020 Same parts and instructions were included in all annuals all the way to '81, maybe even in the reissues following. Quote Link to comment Share on other sites More sharing options...
Mark Posted February 12, 2020 Share Posted February 12, 2020 Yes, you will have to spread the body sides to get it over the roll cage. These parts originated with the 1973 annual kits, and are in most, if not all, Camaro and Firebird kits (except the Trans-Am with the separate T-roof panels, that's a different kit altogether). Quote Link to comment Share on other sites More sharing options...
Casey Posted February 12, 2020 Share Posted February 12, 2020 12 hours ago, PLASTIC FANTASY said: I am missing the instructions. http://modelkitreviews.proboards.com/thread/756/mpc-7519-1975-camaro Quote Link to comment Share on other sites More sharing options...
Rob Hall Posted February 12, 2020 Share Posted February 12, 2020 This look like the same parts the '78 came with...I built the MPC '78 Camaro as a kid and remember the racing parts. Quote Link to comment Share on other sites More sharing options...
PLASTIC FANTASY Posted February 13, 2020 Author Share Posted February 13, 2020 Casey - Thank you for the link. It answered a couple questions I had. Mark - Thanks for confirming the body spread. That is probably the biggest issue when assembling. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.