KBryan67 Posted March 16, 2020 Share Posted March 16, 2020 Hi guys So I'm at tail end of my other project (chevy truck) and decided im going to start a new project while im finishing my other. I believe its a 56-57 chevy nomad that I've had for a very long time. I kinda just threw it together with what was with it. I acquired it when I first got into modeling. It's pretty bare bones. Basically I'm going to carefully tear it down and rebuild it. SEE PICS Quote Link to comment Share on other sites More sharing options...
afx Posted March 16, 2020 Share Posted March 16, 2020 Its a '57. Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted March 17, 2020 Author Share Posted March 17, 2020 UPDATE 3/16/20 So I made some progress (SEE PICS), got all paint stripped off of body and floor of cab. Also rebuilt rear chassis and inside cab rear floor/trunk. Reason I rebuilt rear was because when I originally built it I used what I had and rear tires were snug in between body and floor/trunk panel touching both so I wanted to fix that and the trunk panel wasn't level with rest of floor of cab it was tilted upwards. Little body work needed. Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted March 24, 2020 Author Share Posted March 24, 2020 UPDATE 3/24/20 Hi guys So made a little more progress on this build (SEE PICS). I had to reinforce the front end of body because model is old and brittle in some areas. Scratch built tailgate and wheel wells. Im thinking about carpeting entire floor and wheel wells but need to figure out type of glue that will stick to material and plastic. Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted March 28, 2020 Author Share Posted March 28, 2020 (edited) UPDATE 3/27/20 So even though i have an engine in this car originally it looked ugly paint wise. Been going through spare parts to see if I could just rebuild a fresh unpainted engine but everything I have just dont seem to match up either heads to small for block or whatever. So I carefully took apart engine i had in it and luckily it came apart pretty easy (SEE PIC.) All apart and I used thinner to remove most of paint. I really need to stock up a little on spare parts. Edited March 28, 2020 by KBryan67 Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted April 1, 2020 Author Share Posted April 1, 2020 UPDATE 3/31/20 Hi everyone Hope everyone is staying safe out there during this pandemic. Anyway so on my previous post on engine. I decided to not use that one and use a different one. With a little filing and sanding here and there I built an engine. Dont know size but it will work. (SEE PICS). The water pump I used a spare one and reshaped it a bit. I added extensions on the main belt and pulleys so I could add a belt for alternator. I had to make a port on the manifold for one of the radiator hoses. Paint color is aluminum block and heads, silver chrome valve covers and alternator mounting brackets and gold on carbs and carb cover. Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted April 3, 2020 Author Share Posted April 3, 2020 (edited) UPDATE 4/2/20 So I got both doors and tailgate hinged onto body (SEE PICS). The hood I wanted to do something different. So I used a hood that I had that probably went to a 55 cuz doesn't perfectly match up. Instead of a hood that opens from front I cut it down middle and kept it simple by using masking tape to hinge to body. Unfortunately I dont have front or side windows but wouldn't be first model I've done without the windows. Edited April 3, 2020 by KBryan67 Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted April 3, 2020 Share Posted April 3, 2020 Nice creative ideas. I like the use of the custom grill surround. Your tailgate looks good too. Later- Quote Link to comment Share on other sites More sharing options...
KBryan67 Posted April 3, 2020 Author Share Posted April 3, 2020 TY Modlbldr Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.