drummerdad Posted March 21, 2020 Share Posted March 21, 2020 Ive been working on this for a few weeks. I didnt want to post until I was sure I could overcome a few issues I have had in the past. I started a drag week mustang, and the body was old, and the cage just sucked on it. Im in the middle of a 1/12 scale drag VW, but I wanted to do a drag week style car. So, I started this. Hopefully Ill be able to crest the hump, and actually finish this model. Its a 1979 Pontiac Firebird from MPC. The engine is a sonny leanard mountain motor 1000 cid billet engine. The transmission is a 3 speed lenco auto, the rearend is a ford 9 inch from the mustang, and the centrifugal supercharger is scratch built to mimic a procharger F3. There are various other 3d printed parts, and some photo etching. Wheels are from 3d scale parts. I know the joints need a little work. Im going to use some fingernail filler my wife gave up on, after I get it together. Ill get a few more pictures, in a little bit. The front end has been separated now, and the body mounts have been added. I also had to spin the supercharger around. It works better with a driver side exit. Quote Link to comment Share on other sites More sharing options...
drummerdad Posted March 21, 2020 Author Share Posted March 21, 2020 (edited) Here are two more. This is recent. I have started the front suspension. I still have a lot of work left. The box will be the intercooler. The hot side goes in where you see, and then the discharge will be on the top and go straight to the intake. You can see the body is a little warped in the bottom picture. The cage is square, but the body is twisted because of the t-tops, just like in the real firebird with t-tops. I bet this one would leak water too. Edited March 21, 2020 by drummerdad more info. Quote Link to comment Share on other sites More sharing options...
afx Posted March 21, 2020 Share Posted March 21, 2020 Glad you started a thread on this build, look forward to seeing more of your work. Quote Link to comment Share on other sites More sharing options...
drummerdad Posted March 22, 2020 Author Share Posted March 22, 2020 On 3/20/2020 at 8:57 PM, afx said: Glad you started a thread on this build, look forward to seeing more of your work. Thank you. I hope it doesnt disappoint. So I got a little done today. We are relocating our sound room at church, and I am doing the sound equipment and rewire, so I had to work on that for a few hours today. I managed to get the upper strut supports in place. The picture only shows the left side, but I got the other one in also. And I made an impeller for the procharger, although I didnt get a picture of it. You cant see the brake caliper in these pictures, because I havent made it yet. Im going to make a detailed front piece that you can see through the wheel, but I havent got to it yet. Quote Link to comment Share on other sites More sharing options...
NYLIBUD Posted April 18, 2020 Share Posted April 18, 2020 Very amazing.Great job so far. Quote Link to comment Share on other sites More sharing options...
Codi Posted April 19, 2020 Share Posted April 19, 2020 What a sweet progress so far Dwayne. Will certainly follow your progress. cheers, tim Quote Link to comment Share on other sites More sharing options...
Scott8950 Posted April 20, 2020 Share Posted April 20, 2020 Nice work I'll be following this build Quote Link to comment Share on other sites More sharing options...
chris coller Posted April 20, 2020 Share Posted April 20, 2020 Awesome. Have you looked on Shapeways for parts? Quote Link to comment Share on other sites More sharing options...
AmericanMuscleFan Posted April 20, 2020 Share Posted April 20, 2020 Very good start on the frame and on the cage so far! Nice procharger too! That's my kind of build... I do love drag cars no matter the brand! What scale it is? Quote Link to comment Share on other sites More sharing options...
Force Posted April 20, 2020 Share Posted April 20, 2020 Looking good. Quote Link to comment Share on other sites More sharing options...
drummerdad Posted April 25, 2020 Author Share Posted April 25, 2020 (edited) Thanks for the kind words guys. I have bought a few 3d parts from Shapeways...I think. I go to a few 3d sites, and I think they have stores on Shapeways, who prints the parts. It works out good for me. It is a 1/16 scale firebird. Edited April 25, 2020 by drummerdad Quote Link to comment Share on other sites More sharing options...
AmericanMuscleFan Posted April 26, 2020 Share Posted April 26, 2020 I have bought some 3D parts few months ago to check the quality (I'm a curious guy...) but I was a little bit disappointed about the rendering for 1/25 scale. The technology behind this is purely amazing and open the way to the production of incredible parts. The rendering however have it's limits but I'm sure that 1/16 scale makes enough difference in size to generate some accurate parts. These parts are rather expensive but worth it when you want to build ultra detailed models. Quote Link to comment Share on other sites More sharing options...
Mike Williams Posted April 26, 2020 Share Posted April 26, 2020 Oh my! What do we have here? I'd say sensational work, very clean and well photographed. Delicious. Mike.. Quote Link to comment Share on other sites More sharing options...
drummerdad Posted April 27, 2020 Author Share Posted April 27, 2020 Some of the 3D parts have better quality than others I have found. However they are better than the resin parts I have bought. It might be the same thing, where the supplier makes all the difference, but I have not been impressed with resin parts. Im trying to improve on my fabrication skills. Its cheaper than resin and 3d parts, but it takes awhile to get good enough to make a good part. Quote Link to comment Share on other sites More sharing options...
MeatMan Posted April 27, 2020 Share Posted April 27, 2020 Nice! I love that chassis jig. Quote Link to comment Share on other sites More sharing options...
beeRS Posted May 3, 2020 Share Posted May 3, 2020 I love builds like this. Its not just scale modelling, but scale engineering too. Excellent work so far. Quote Link to comment Share on other sites More sharing options...
dragcarz Posted May 3, 2020 Share Posted May 3, 2020 Just amazing! Way beyond my skill set! Quote Link to comment Share on other sites More sharing options...
streetmachine11 Posted May 3, 2020 Share Posted May 3, 2020 great progress so far and nice jig this one is going to be wild! Quote Link to comment Share on other sites More sharing options...
Nazz Posted May 3, 2020 Share Posted May 3, 2020 2 hours ago, streetmachine11 said: great progress so far and nice jig this one is going to be wild! I am going to enjoy watching this come together. Looks great so far! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.