Jump to content
Model Cars Magazine Forum

Recommended Posts

Posted (edited)

So........having all but finished my paver build, it’s time to start the next project.  Years ago I worked for a large general contractor.  Actually, all of my builds are based upon equipment we had there and were on my jobs. This HC-218 is an 82 ton capacity, and had, if memory serves correctly, 210’ of boom and 30’ of jib on it. This was powered by an 8V-71 on the truck and had Cummins upper power. That old girl earned her keep back in the late 80’s when I was there and is still doing so to this day. 
 

And, as usual, step one is getting reference materials. I obtained a parts manual and operator’s and maintenance manual to start. I plan on starting with a frame from an American LaFrance ladder truck, which will undergo a lot of alteration to accept the dual drive and dual steer arrangement and get super reinforcement done to it. My plan is to make this with approximately 100’ of boom which will be plenty! This thing is going to be huge! The length of the truck will be 33’ 4” in scale alone, and 10’ 6” wide. 
 

Attached are some  photos of the crane we had. The red cab photos are of it’s first, and original paint job. The white cab is an updated Link-Belt color scheme that I painted it in just before I left there.  In the wintertime I ran the paint and weld shop and this old girl got done up by me 3 times. That is why I tend to favor paint shop fresh jobs!!!
 

I hope you enjoy the journey through this  one, its gonna be a heck of a ride!! Hang on!

AFAD0F3C-8722-4C2A-B753-B145B5EBDBF6.jpeg

19FFD11B-F7F4-4F66-80D9-C64B599AD8B2.jpeg

BF23A68F-87EC-4BAD-9395-4B0ECF0557F9.jpeg

490E0A85-6CDF-47A4-B726-6875ECFB709D.jpeg

96E7F685-0118-4B07-8B6E-2531348CF1A0.jpeg

C6CFA86D-6BFF-42DC-8B86-04B016AE9A1D.jpeg

269F2A56-A222-40FA-B341-F985CBD76712.jpeg

F3C25300-0E13-4319-8A71-2C8BCB2EAC00.jpeg

6B8450C6-CB62-462C-B854-F4A14C097025.jpeg

4A4199A0-D2CA-4F48-9C22-D6BCCC4DABD6.jpeg

4B4BB36C-BC4F-4DE5-94E2-FDEC9E04382A.jpeg

37866F3C-1D8D-42A8-9AC7-EE2D519FE149.jpeg

Edited by redneckrigger

Share this post


Link to post
Share on other sites

I have complete faith in your ability to pull this off , this is going to be huge.....

Share this post


Link to post
Share on other sites
51 minutes ago, Chariots of Fire said:

That boom is just crying for some brass work!!😆

Funny you say that Charlie! There are two skills I have not ever tried yet........ resin casting and soldering brass.  May be reaching out to you for advice! Started gathering parts today!

Share this post


Link to post
Share on other sites

Very ambitious project.

Share this post


Link to post
Share on other sites

WOW! More fire truck parts, I like your builds, Great project, Years ago Plastistruct had plans for a crane, wrong scale for me. too much time converting plans to 1/25th

greg

Share this post


Link to post
Share on other sites

Definitely watching this develop, and know its gonna be awesome.  During my trip to Barney dickenson and seeing the boom crane there, it's a project I know you'll hit a homerun

Share this post


Link to post
Share on other sites

This will one interesting build! I will keeping a close eye on this!

 

Share this post


Link to post
Share on other sites

I don't know how y'all do it from the spec sheets, Man... Hats off to ya!!! This is going to be interesting... I'm excited!

Share this post


Link to post
Share on other sites

Finally got enough parts together to get this show on the road! Laid out all the dimensions on the bench, and made up the frame rails and front and rear crossmembers. The frame is a double frame and is very heavy duty. The tires are 14.00 x 24. This is going to be a huge build!

96AD7913-DFFD-4AA7-A7DC-0298AFDA52D7.jpeg

FDC93E7B-8A40-4747-9CF1-EF4FF617CB97.jpeg

59C45EA2-A69A-414B-97D4-422DE02E3B3B.jpeg

5D7A20FF-5559-4E82-A755-502715429DEF.jpeg

C58D027D-9150-48C3-B913-B4A7B82214EB.jpeg

5F85EFD5-99E7-4794-A343-DFC1CD530295.jpeg

89FB5EF2-F03A-4104-AC6E-14CE741BBCB5.jpeg

Share this post


Link to post
Share on other sites

Tom, that's going to be a monster! That is one Huge frame on the beast. I will be following this build!

Share this post


Link to post
Share on other sites

Here we go !!! I cant have popcorn , but I'm watching this one 

Share this post


Link to post
Share on other sites

Looking forward to seeing your Link-Belt crane building. 

Share this post


Link to post
Share on other sites

Wow, this is going to be spectacular, I would like to follow along with great interest as well......  love this sort of thing.....

Share this post


Link to post
Share on other sites

Mate, After your previous builds demonstrating your skills, This one will be one to watch.. 

 

Share this post


Link to post
Share on other sites

Paint the fenders and hood black on that Ford dump in the background and you will have a good Mass Highway rig from the 60's.😊

Share this post


Link to post
Share on other sites

Found some bench time.........roughed in the rear suspension.  The axles are old Mark Savage resin casts, and the walking beam is a modified AITM resin.  There is no spring or air suspension on this crane, just a super heavy duty walking beam.  Lots of bits and pieces and several cross members to be added, but it’s looking the part quite well.  

CDAFAFF9-7658-40A0-880D-FF33D3392CF5.jpeg

57ADD87E-00B5-48F0-BB47-3679CFE7CC87.jpeg

0F5A7C7E-89F6-46E6-B1CF-C2A48AB79BDB.jpeg

F3C75609-0E47-4B7F-A03C-95F73A2BBF7F.jpeg

6385E150-1E0E-4A00-9D96-9E32C8ABF986.jpeg

Share this post


Link to post
Share on other sites

Nice start, liking where this is headed. That dump in the background looks pretty cool too!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...