Jump to content
Model Cars Magazine Forum

1989 Lotus Esprit V8 DOHC


RickRollerLT1

Recommended Posts

Monogram Exotics Series 1/24th scale kit. I had originally built one of these, in a failed attempt with a baldy warped frame/interior shell and horrible glass, back in 2008. I had acquired a parts kit cheap at an auction back in 2016 that was missing the body shell and it's pieces along with some other small parts, which inspired me to find the pieces of the original one I had built back in '08. Since then, I had located the body w/ rear bumper glued on, the rear deck with it's spoiler, and whatever remained of the DOHC 4 cyl it had. 

I always customize my BLAH_BLAH_BLAH_BLAH and wasn't going with a 4 banger set-up for the new build. I found a chrome molded Chevy 350 block (which could be from a AMT ZR1 since they had chrome engines and had provisions for a separate transmission) and used the DOHC heads and valve covers from the mint Lotus motor and the built one to make a wild DOHC V8 combination that would look dayumm in the Lotus! I located a front cam/fan belt assembly piece from a Ferrari V8 that fit on the 350 block and mated up nicely with the Lotus heads. I also went with a roots supercharger setup with a custom intake to drive the wild factor to 11. I also added a NOS bottle and headers from some unknown source that fit on the Lotus heads, and made a custom exhaust system using parts from a Revelle Corvett Sting Ray III. From the box I saw issues with the front ride height sitting too high making it ride like a 4x4, so I lowered the front spindles and made adjustments to the rear to fix the truck like stance it had. I also went with wheels and tires from a Revell ACR Viper since the kit's pieces were just tripe. I had to trim around the rear hatch to fit the tip of the motor and intake for the Supercharger, and decided to use the hatch's glass as a molded body piece that also acts as a hood scoop for the motor. Spoiler fit is a bit weird, don't know if it's lazy engineering by Monogram Interior or what, but I think it needed something ether way. Interior is Rustoluem Advanced Formula Flat Brown, and exterior is Tamiya TS-73 Clear Orange cleared with Pledge.

20200511_160808.thumb.jpg.6deb72fdb8eb17c054b206ca12b2d8a1.jpg

20200511_160820.thumb.jpg.b9a07a8af9e85e94953f576b15019c5f.jpg

20200511_160902.thumb.jpg.244612c12b7134de20df7c3ecab72062.jpg

20200511_160919.thumb.jpg.6949cd3f37576228e001382bb09e460b.jpg

20200511_160926.thumb.jpg.f6b7af5a4e622ff3eb539a71eb248f81.jpg

20200511_160942.thumb.jpg.48e62d00ed2dca9cd2b2cf97ebdef137.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...