Modlbldr Posted May 25, 2020 Share Posted May 25, 2020 I've been working a bit on this idea of widening the fenders of this squarebody. I was curious to see what it looked like. The rear fenders are wide enough now that I don't need to widen the wheel wells in the bed. I will need to raise or remove the tops in order to lower the bed. But, at least this way, I won't have to cut up the bed floor details. I'll be making a custom frame and suspension for this. Any comments or criticisms welcomed. Later- 2 Quote Link to comment Share on other sites More sharing options...
Chevythunder85 Posted May 26, 2020 Share Posted May 26, 2020 That is looking awesome! Loving the mean look with the wide body. Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted May 26, 2020 Share Posted May 26, 2020 Whatever you have in the air up there must be potent Tom. I never would have thought about widening the body instead of narrowing the chassis. Looking good! Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted May 26, 2020 Share Posted May 26, 2020 Great look on that square body! Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted May 26, 2020 Author Share Posted May 26, 2020 Thanks fellas. Got a bit more work done on sanding out the tops of the front fenders and filling in the gaps on the rears. Nothing much picture worthy. Later- Quote Link to comment Share on other sites More sharing options...
chris chabre Posted May 29, 2020 Share Posted May 29, 2020 I may have split the bed at the rails like you did the front (which I like) cant wait to see where you go with this. As a guy that does custom metal work, I wish flaring a set of steel fenders was as easy as it is in Styrene haha Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted May 29, 2020 Author Share Posted May 29, 2020 Thanks Chris. I spent time cleaning up the frame and body today, along with working on two other kits, so no pics today. Later- Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted March 14, 2021 Share Posted March 14, 2021 On 5/28/2020 at 9:42 PM, Modlbldr said: Thanks Chris. I spent time cleaning up the frame and body today, along with working on two other kits, so no pics today. Later- Any updates on this? Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted March 14, 2021 Author Share Posted March 14, 2021 (edited) 2 hours ago, Bullybeef said: Any updates on this? Sadly, no. I should dig this back out and get to work on it. I like the way it was looking. Later- Edited March 14, 2021 by Modlbldr Quote Link to comment Share on other sites More sharing options...
Bullybeef Posted March 14, 2021 Share Posted March 14, 2021 21 minutes ago, Modlbldr said: Sadly, no. I should dig this back out and get to work on it. Unlike the way it was looking. Later- I’d like to see more of it, it looks awesome Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted March 14, 2021 Author Share Posted March 14, 2021 2 hours ago, Bullybeef said: I’d like to see more of it, it looks awesome Thanks! Later- Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted June 28, 2021 Author Share Posted June 28, 2021 Brought this one back out and did some putty work on the bed. Getting excited about it again. I like that I only need to cut the tops of the inner wheelwells and not the bed floor to lower the rear. Going to start work on bagging the chassis. Later- 2 Quote Link to comment Share on other sites More sharing options...
espo Posted June 29, 2021 Share Posted June 29, 2021 Great looking body work on the fenders. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted June 29, 2021 Author Share Posted June 29, 2021 10 hours ago, espo said: Great looking body work on the fenders. Thanks espo! Trying hard to get back into a routine of sorts for model building. I've been dealing with a lot of sorting and selling of my Buddy's collection and a lot of changes at work have left me little build time. Later- Quote Link to comment Share on other sites More sharing options...
espo Posted June 29, 2021 Share Posted June 29, 2021 2 hours ago, Modlbldr said: Thanks espo! Trying hard to get back into a routine of sorts for model building. I've been dealing with a lot of sorting and selling of my Buddy's collection and a lot of changes at work have left me little build time. Later- Glad to hear that you're getting back on your model bench again. I hope the employment issues work out for you as well. I like this design with the wide body look. I've wanted to do something along these lines for a long time but just haven't found the right subject yet so I'll be following your build on this for ideas. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted July 17, 2021 Author Share Posted July 17, 2021 Been working a bit at a time on this lately. Using the frame from the Foose F100. I reworked the rear four link by removing the plastic bars and putting in longer metal bars to improve the.look and move the rear axle back a bit to the center of the wheelwells. I also raised the bed floor a bit. Tonight I temporarily set it up on the wheels to see what it looked like. Still needs some modification. The first order is to narrow the front track. Easy enough by cutting down the mounting posts on the wheels. Next is o get it a bit lower somehow. That's it for tonight. Later- Quote Link to comment Share on other sites More sharing options...
Zippi Posted July 17, 2021 Share Posted July 17, 2021 Looking pretty good. Those are some pretty big ole meats under the fenders. Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted July 17, 2021 Share Posted July 17, 2021 Looking good Tom 👍 Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted July 18, 2021 Author Share Posted July 18, 2021 Thanks guys! Later- Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted July 18, 2021 Author Share Posted July 18, 2021 Got a bit more adjusting done on the suspension. In the rear I had part of the plastic where the inner wheelwell wells had been that needed cut out. (Second pic) In the front the wheel hubs needed to be shortened to get the track narrow enough to fit inside the fenders. I wouldn't mind getting it a bit lower but the rear fenders will not allow it. Plus, as it is it sits level now. Later- Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted July 18, 2021 Author Share Posted July 18, 2021 I made a quick mod to the frame in the rear. Ill clean it all up on my next bench session. I cut the frame just past the Cab and added a block to raise the rear of the frame a bit. I did this for a couple of reasons. Now I will not have to add such a tall block between the frame and the bed floor and now my rear axle does not touch the frame. Later- Quote Link to comment Share on other sites More sharing options...
Zippi Posted July 19, 2021 Share Posted July 19, 2021 Your GMC is coming along pretty nicely. Quote Link to comment Share on other sites More sharing options...
Mattilacken Posted August 3, 2021 Share Posted August 3, 2021 Nice progress! Quote Link to comment Share on other sites More sharing options...
Rocking Rodney Rat Posted August 6, 2021 Share Posted August 6, 2021 (edited) Nice work on this custom truck! We don't see enough of this kind of craftsmanship around here.... -RRR Edited August 6, 2021 by Rocking Rodney Rat Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted August 6, 2021 Author Share Posted August 6, 2021 On 7/19/2021 at 4:30 AM, Zippi said: Your GMC is coming along pretty nicely. Thanks! I can't wait to get back on it. On 8/3/2021 at 3:06 PM, Mattilacken said: Nice progress! Thank you! 1 hour ago, Rocking Rodney Rat said: Nice work on this custom truck! We don't see enough of this kind of craftsmanship around here.... -RRR Thank you Sir. I appreciate it. Always enjoyed customizing my builds. I really like the things you do with your builds. Later- Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.