mrmike Posted June 9, 2020 Share Posted June 9, 2020 My latest project is Tamiya's Ford Mustang GT4 race car. Since I am a fan of the Goodwood Festival of Speed, this car will be painted with Tamiya TS-4 German Grey with a Tamiya TS-13 Gloss Clear top coat and a white roll cage with a black racing seat to represent the car shown there in 2017. I haven't built a race car in a very long time. Let's see what I can do with this kit! More Mustang to come... Quote Link to comment Share on other sites More sharing options...
Phildaupho Posted June 9, 2020 Share Posted June 9, 2020 Looks like a very nice kit. A friend recently got one so looking forward to seeing it in the flesh. There may be one in my future. Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 10, 2020 Author Share Posted June 10, 2020 Phil, this seems to be an excellent kit. Get it before it disappears! I pulled the body out of the baggie it was in to inspect it for mold lines and flash and surprise! There are none! Now on to a bath! The instructions say to leave the chassis white and I thought it would have been grey like the body color. I started to think about taking a "body-in-white" and Multimatic Racing in Canada building the cars with roll cages and such and then painting the bodies. I suppose the chassis would have remained white while they painted the body grey with the usual overspray. More Mustang to come... Quote Link to comment Share on other sites More sharing options...
bogger44 Posted June 11, 2020 Share Posted June 11, 2020 Will be watching, Mike. Heard a lot of great things about this kit. It's great there's little to no mold lines on the body. ? I've picked up one of these pony's up as well and it's towards the top of the "to do" list. And a bonus, I had ordered the Motorcraft livery decals from Indycals and they were in my mailbox today. ? Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 11, 2020 Author Share Posted June 11, 2020 Thanks Tony! I have heard of other livery decals being offered and I expected that to happen when the kit wwas going to be released. Good luck with yours and I hope you do a WIP on it. Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 15, 2020 Author Share Posted June 15, 2020 I did a little painting today. I painted the wheels with Tamiya TS-42 Light Gunmetal, the exhaust system with Tamiya X-31 Titanium Gold, the front suspension and disc brakes with Model Master Acryl Arctic Blue Metallic, Model Master Stainless Steel Metalizer, Tamiya Titanium Gold and Tamiya Chrome Silver. The chassis is coming along... More Mustang to come... Quote Link to comment Share on other sites More sharing options...
kelson Posted June 16, 2020 Share Posted June 16, 2020 Looks pretty good so far! Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 16, 2020 Author Share Posted June 16, 2020 Thanks Curtis! This kit is just falling together other than the tiny little parts and my fat fumble fingers. I keep watching the video of the Mustang GT4 running up the hill at Goodwood. Awesome! Quote Link to comment Share on other sites More sharing options...
bogger44 Posted June 17, 2020 Share Posted June 17, 2020 Chassis is looking real sharp Mike, keep it up! Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 17, 2020 Author Share Posted June 17, 2020 Thanks Tony! There it is! There's one mold line on each side of the A pillar and runs the length of the upper door on both sides. There's a mold line on each corner of the rear bumper, too! I have highlighted them in pencil. A mockup of the chassis with all four wheels and tires. More Mustang to come... Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 19, 2020 Author Share Posted June 19, 2020 More work on the interior has been done. The roll cage has been assembled and is not glued into the interior. I used Bare Metal Foil for the clamps on the two bottles in the interior. The grey bottle with the two clamps on it is suppose to be painted with Tamiya XF-63 German Grey and it is not listed in the Paint Callout. Since I don't have that color, I used Model Master Acryl Gunship Grey. I want to wire all this up, but I haven't been able to find any schematics or diagrams. Maybe someone knows where I can find them. More Mustang to come... Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 22, 2020 Author Share Posted June 22, 2020 I have been wiring the interior components of the GT4 Mustang. While I tried to find some good pictures showing the wiring, I decided to just wire everything freely with no particular reference. It's all a guessing game for me and I am having fun! More Mustang to come... Quote Link to comment Share on other sites More sharing options...
Dave Van Posted June 22, 2020 Share Posted June 22, 2020 The gray body color sure looks like Ford Avalanche gray......is it stated anywhere??? This is Avalanche gray..... Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 22, 2020 Author Share Posted June 22, 2020 Dave, that gray looks to be too light. Almost white in color. The actual color has not been mentioned anywhere that I could find. The instructions say Tamiya TS-4 German Grey with Tamiya TS-13 Clear. Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 23, 2020 Author Share Posted June 23, 2020 More wiring added to the interior. I added the drivers seat with harness that I had cut out of the decal sheet since it would be too flat just using the decal alone. More Mustang to come... Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 25, 2020 Author Share Posted June 25, 2020 (edited) I removed the seat harness so I could apply the decals to the seat, so I swapped the straps around and reglued them to the seat. One of the things I had noticed was the white edge around the harness and I used a black Sharpie to mask the edges. The interior is now decaled and wired and while the wiring may not be totally correct, it does add something to the interior. I installed the dash after adding the decals to the center stack and I used a couple of PE rings for the instrument panel. More Mustang to come... Edited June 26, 2020 by mrmike Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 25, 2020 Author Share Posted June 25, 2020 I thought I had finished the chassis until I realized that I had not glued on the door panels. The wheels and tires looked like it was missing something and then I realized that the tires don't have any lettering on the sidewalls. I don't have any Continental sidewall decals, but I do have some Goodyear sidewall decals by Slixx and I used those instead. I'll let this dry a while and then I'll give it a coat of Testors Dullcoat. More Mustang to come... Quote Link to comment Share on other sites More sharing options...
bogger44 Posted June 26, 2020 Share Posted June 26, 2020 She's coming along nicely, Mike. Nice work on that wiring, and looking forward to more updates. Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 26, 2020 Author Share Posted June 26, 2020 Thanks Tony! I keep telling myself that I've got to paint the body and it still sits on the stand in my paintbooth waiting for primer and paint. Quote Link to comment Share on other sites More sharing options...
Funkychiken Posted June 26, 2020 Share Posted June 26, 2020 Stang-tastic! Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 27, 2020 Author Share Posted June 27, 2020 Thanks Atin! Well, I do have to admit, adding decals to the tires and coating them with Testors Dull Coat work rather well. I like it so much I had to do a mockup with the body! More Mustang to come... Quote Link to comment Share on other sites More sharing options...
Bennyg Posted June 27, 2020 Share Posted June 27, 2020 Very nice. How are you going to do the tail lights? That’s the only issue I can see coming up. I’m loving the kit so far. Ben Quote Link to comment Share on other sites More sharing options...
kpnuts Posted June 28, 2020 Share Posted June 28, 2020 Looking great, I like the idea of highlighting the areas needing attention with pencil defo going to borrow that one it th future Quote Link to comment Share on other sites More sharing options...
mrmike Posted June 28, 2020 Author Share Posted June 28, 2020 (edited) 21 hours ago, Bennyg said: Very nice. How are you going to do the tail lights? That’s the only issue I can see coming up. I’m loving the kit so far. Ben I have heard of some people saying that they had trouble detailing the taillights. I haven't though much about it yet. Basically, paint the back of the taillights with transparent red and then detail the front of the taillights. We shall see when I get to that bridge... 13 hours ago, kpnuts said: Looking great, I like the idea of highlighting the areas needing attention with pencil defo going to borrow that one it th future I'm glad you like that idea! I use a pencil when I have faint moldlines that are hard to see and I also use the pencil to indicate other issues that may need fixing. Edited June 28, 2020 by mrmike Quote Link to comment Share on other sites More sharing options...
Bennyg Posted June 28, 2020 Share Posted June 28, 2020 Hi Mike. I found an interesting set of photos for the Mustang GT4. https://www.motoring.com.au/gallery-ford-mustang-gt4-119408/ cheers Ben Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.