Modelbuilder Mark Posted September 17, 2020 Share Posted September 17, 2020 Got this as a glue bomb about 25 years ago. While not my original intent, this one ended up being only completed as a curb side. I faced some issues during final assembly, mostly by my rushing it and being clumsy, but I proceeded to finish. I hope that I have photographed it in such a way as to minimize the damage/distractions. Overall, I think it will look OK sitting on the shelf. The California plate is not the final plate for the car, I just needed on on there so I could call it done. The color itself is a very old bottle (over 20 years) of Cobra Colors' Gulf-stream Aqua Metallic (yeah, I know, Ford color, but hey, it is not factory stock) with Scalefinishes.com Superclear. Chrometech USA did the bumpers around 17-18 years ago, glass and taillights are Modelhaus items, seat pattern decals Scale Motorsport, and the wheels are from the Via Riva kit I believe. Quote Link to comment Share on other sites More sharing options...
Spottedlaurel Posted September 17, 2020 Share Posted September 17, 2020 Either your photos are very good at hiding the problem areas, or you're being rather modest - I think the latter, it looks excellent! Quote Link to comment Share on other sites More sharing options...
David G. Posted September 17, 2020 Share Posted September 17, 2020 Nicely Done! Beautiful detail work and the interior looks fantastic! The color looks great on that car, very much like a factory color of the era. David G. Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted September 17, 2020 Share Posted September 17, 2020 I see nothing wrong with that, at all. Everything about it looks fantastic! I really like the color choice for it too. One to be very proud of. Later- Quote Link to comment Share on other sites More sharing options...
unclescott58 Posted September 17, 2020 Share Posted September 17, 2020 Sweet! You did a beautiful job on this kit. I'm impressed and like what I'm seeing. Quote Link to comment Share on other sites More sharing options...
Tom99 Posted September 17, 2020 Share Posted September 17, 2020 Nice work. Quote Link to comment Share on other sites More sharing options...
oldscool Posted September 17, 2020 Share Posted September 17, 2020 That is just beautiful! Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted September 17, 2020 Share Posted September 17, 2020 Beautifully done, I see nothing wrong with it, we are always our own worst critic. Quote Link to comment Share on other sites More sharing options...
espo Posted September 17, 2020 Share Posted September 17, 2020 Great looking build, and I also didn't notice anything out of place. I like your seat inserts, unusual, but they look good here. Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted September 17, 2020 Share Posted September 17, 2020 wow, that's nice! I agree with the others, can't see any flaws, but everyone's standards are different I guess. I'd be over the moon with this result. Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted September 17, 2020 Author Share Posted September 17, 2020 Thanks everyone for the kind words, I sincerely appreciate them. I will tell on myself here a bit... When installing the Chrysler interior that I had modified, I was so happy that I got luck with I got glue on the dash, but not the glass. As the glass is Modelhaus vacu-form, which of course is no longer avail, and not wanting to damage the glass, I left the dash in place, and tried to use a bent brush to fix the smudge on the dash, only to make it worse. So, the dash is noticeably touched up. Then, because I just could not leave well enough alone, after the interior floor was installed, I knocked one of the side panels loose trying to adjust it.(can be seen in one of the pics) but again, too risky to remove the pan. I also was using a new bottle of the Bob Smith Industries gold superglue that does not fog, but MAN that stuff is runny. Did not know I had some on me, and smudged the front glass. Again, small spot, I should have left it alone, but tried to take it off and made it worse, and left a GIANT mark, lower center. I ended up very carefully polishing it out with sanding clothes and polish three times. Still messed up, but dramatically better. During this same time, I then discovered I had gotten some on the lower right front bumper and the paint in one place. The paint I could fix, but afraid to work on the chrome bumpers..Finally, the last several years, my new years resolution was simply "test fit more often".....I failed, and despite chassis alterations, the wheel placement/chassis length from center hub to center hub was off, so I had to cut/correct that. Most of these I consider to be rookie mistakes on my part, mostly because I started to rush at the end.... Quote Link to comment Share on other sites More sharing options...
cobraman Posted September 17, 2020 Share Posted September 17, 2020 Very sharp ! Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted September 17, 2020 Share Posted September 17, 2020 I like it! De Soto looks good in that blue! Quote Link to comment Share on other sites More sharing options...
Can-Con Posted September 18, 2020 Share Posted September 18, 2020 8 hours ago, Modelbuilder Mark said: Thanks everyone for the kind words, I sincerely appreciate them. I will tell on myself here a bit... When installing the Chrysler interior that I had modified, I was so happy that I got luck with I got glue on the dash, but not the glass. As the glass is Modelhaus vacu-form, which of course is no longer avail, and not wanting to damage the glass, I left the dash in place, and tried to use a bent brush to fix the smudge on the dash, only to make it worse. So, the dash is noticeably touched up. Then, because I just could not leave well enough alone, after the interior floor was installed, I knocked one of the side panels loose trying to adjust it.(can be seen in one of the pics) but again, too risky to remove the pan. I also was using a new bottle of the Bob Smith Industries gold superglue that does not fog, but MAN that stuff is runny. Did not know I had some on me, and smudged the front glass. Again, small spot, I should have left it alone, but tried to take it off and made it worse, and left a GIANT mark, lower center. I ended up very carefully polishing it out with sanding clothes and polish three times. Still messed up, but dramatically better. During this same time, I then discovered I had gotten some on the lower right front bumper and the paint in one place. The paint I could fix, but afraid to work on the chrome bumpers..Finally, the last several years, my new years resolution was simply "test fit more often".....I failed, and despite chassis alterations, the wheel placement/chassis length from center hub to center hub was off, so I had to cut/correct that. Most of these I consider to be rookie mistakes on my part, mostly because I started to rush at the end.... Sounds just how some of my builds go Mark. Try to fix one thing and mess up 2 or 3 more. I had to send the back bumper out for replating 3 times on my custom '62 Chrysler I finished a couple months ago. Just kept messing up the chrome and needing to have it redone. ANYWAY ,, Love the car. Looks along the lines of how I'd have done it myself. Quote Link to comment Share on other sites More sharing options...
Steve H Posted September 18, 2020 Share Posted September 18, 2020 Hi Mark, that’s a beautiful build and excellent colour choice. Glad to know I’m not the only one that tends to rush a bit at the end, often causing those oops moments. You are likely the only one that will notice. Looks fantastic to me. Cheers, Steve Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted September 18, 2020 Share Posted September 18, 2020 Great looking Desoto Mark!! Love that seat upholstery! Steve Quote Link to comment Share on other sites More sharing options...
Modelbuilder Mark Posted September 18, 2020 Author Share Posted September 18, 2020 Thanks everyone, I sincerely appreciate the kind words. Quote Link to comment Share on other sites More sharing options...
BeakDoc Posted September 18, 2020 Share Posted September 18, 2020 Yessir, that’s a fine looking Desoto. As a fellow “rush at the ender” I certainly sympathize with your plight. You did a great job covering your tracks, however, and that’s what counts. Quote Link to comment Share on other sites More sharing options...
mchook Posted September 18, 2020 Share Posted September 18, 2020 I've been wanting one of these kits for a while now and after seeing this one I want one even more. GREAT JOB!!! Quote Link to comment Share on other sites More sharing options...
Claude Thibodeau Posted September 18, 2020 Share Posted September 18, 2020 Hi! Very nice, bravo! My neighbour had one when I was a kid. Those fins were huge... CT Quote Link to comment Share on other sites More sharing options...
The German Posted September 18, 2020 Share Posted September 18, 2020 Hi! I got the same kit but I'm going blind when I see this really great job! Hat's off!!!! The kit I have is just junk. I have already stripped the paintwork and partly repainted it. Let's see if I can do it as well as you can? Again: respect! Quote Link to comment Share on other sites More sharing options...
thatz4u Posted September 18, 2020 Share Posted September 18, 2020 absolute best Johan 60 Desoto I've ever seen, wow Quote Link to comment Share on other sites More sharing options...
bh1701 Posted September 18, 2020 Share Posted September 18, 2020 Beautiful build! Congratulations! Quote Link to comment Share on other sites More sharing options...
bogger44 Posted September 18, 2020 Share Posted September 18, 2020 That is a beauty, and the color looks like one that could have been available at the time. Setbacks aside, it is still one great looking model to be proud of. I'd love to get a hold of one of these kits someday. Quote Link to comment Share on other sites More sharing options...
ATHU Posted September 18, 2020 Share Posted September 18, 2020 Looks amazing, well done!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.