tuffone20 Posted September 21, 2020 Share Posted September 21, 2020 This has been a long project of mine that is getting closer to the finish line. It started with me buying a project from someone who claimed it was ready to be cast. What I got was a pile of junk that required lot of work to get it right and thanks to Mike Schnur who fixed all of the issues with the Club cab. I also had to fix the issue with the chassis and the interior tub was done with the help of Glen Ford and none of this would have been possible without the help of master caster himself Greg Wann! Thank you all for your help with this project guys!! This is where we are at the moment. The Club Cab, interior tub, chassis, grille’s for the 72 to 73 and 74 to 76 and bed molds are done. We are moving on to make the rest of the molds needed for this trans kit. Hood, tailgate. And yes short bed’s are in the works as well as the chassis for them. Quote Link to comment Share on other sites More sharing options...
Fabrux Posted September 21, 2020 Share Posted September 21, 2020 Can't wait! ? Quote Link to comment Share on other sites More sharing options...
Finks Garage Posted September 21, 2020 Share Posted September 21, 2020 Those look great! Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted September 21, 2020 Author Share Posted September 21, 2020 Thanks! I’m at the shop casting them up right now. Quote Link to comment Share on other sites More sharing options...
Greg Wann Posted September 22, 2020 Share Posted September 22, 2020 (edited) You can also get these nice grilles. The headlight detail is very good. Edited September 22, 2020 by Greg Wann Quote Link to comment Share on other sites More sharing options...
Repstock Posted September 22, 2020 Share Posted September 22, 2020 How will I be able to determine when these are ready for purchase? Is there a site I can check? I'd hate to miss out. Quote Link to comment Share on other sites More sharing options...
mikemodeler Posted September 22, 2020 Share Posted September 22, 2020 6 hours ago, Repstock said: How will I be able to determine when these are ready for purchase? Is there a site I can check? I'd hate to miss out. X2! Plus, how much longer before the short bed and chassis are ready, would love one of those too. Knowing Greg Wann is involved means a lot, he does some great work! Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted September 22, 2020 Author Share Posted September 22, 2020 2 hours ago, mikemodeler said: X2! Plus, how much longer before the short bed and chassis are ready, would love one of those too. Knowing Greg Wann is involved means a lot, he does some great work! You can send a email to hgresin@gmail.com and I will put you on the list. As for the short beds? I'm not sure yet. Thanks, Marty Quote Link to comment Share on other sites More sharing options...
av405 Posted September 22, 2020 Share Posted September 22, 2020 Count me in! Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted September 23, 2020 Author Share Posted September 23, 2020 Okay we have set a price on this trans kit. It will be $100 shipped if you choose a plain resin grille and $110 if you want the grille in clear resin. Kit comes with cab, interior tub, long bed, tailgate, hood , valance, chassis and your choice of 72 to 73 or 74 to 76 grilles. If interested please send email to hgresin@gmail.com to be added to the list. Quote Link to comment Share on other sites More sharing options...
martinfan5 Posted September 23, 2020 Share Posted September 23, 2020 Nice looking kit, you have become a resin master yourself there Marty? Quote Link to comment Share on other sites More sharing options...
peteski Posted September 24, 2020 Share Posted September 24, 2020 (edited) That trans-kit looks great Marty! I have a question: when making masters how do you guys model the scripts, like the nice well-defined one on the bed? Are those photo-etched metal, or some other material? Edited September 24, 2020 by peteski Quote Link to comment Share on other sites More sharing options...
Repstock Posted September 24, 2020 Share Posted September 24, 2020 58 minutes ago, peteski said: That trans-kit looks great Marty! I have a question: when making masters how do you guys model the scripts, like the nice well-defined one on the bed? Are those photo-etched metal, or some other material? Not to butt in, but that trim was present on the original issues. Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted September 24, 2020 Author Share Posted September 24, 2020 We started with original MPC parts, that bed is a copy from one of mine kits that has the trim on it. I just have a few old MPC Dodge truck kits. I have added 5 more since this photo was taken. 1 Quote Link to comment Share on other sites More sharing options...
Bucky Posted September 24, 2020 Share Posted September 24, 2020 43 minutes ago, tuffone20 said: We started with original MPC parts, that bed is a copy from one of mine kits that has the trim on it. I just have a few old MPC Dodge truck kits. I have added 5 more since this photo was taken. HOARDER ALERT!!! Quote Link to comment Share on other sites More sharing options...
peteski Posted September 24, 2020 Share Posted September 24, 2020 1 hour ago, Repstock said: Not to butt in, but that trim was present on the original issues. Not at all - thanks Tom. I'm not up on all the pickup truck kits, so I didn't know. Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted January 15, 2021 Author Share Posted January 15, 2021 On 9/23/2020 at 7:38 PM, Bucky said: HOARDER ALERT!!! It’s gotten a lot bigger! 1 Quote Link to comment Share on other sites More sharing options...
Mr. Metallic Posted January 15, 2021 Share Posted January 15, 2021 Any word on the short bed conversions? Quote Link to comment Share on other sites More sharing options...
R.J Posted January 17, 2021 Share Posted January 17, 2021 I have no interest in building that myself but I will say that your mastering and casting work look fantastic. Quote Link to comment Share on other sites More sharing options...
DusterJoe Posted February 15, 2021 Share Posted February 15, 2021 On 1/15/2021 at 4:18 AM, tuffone20 said: It’s gotten a lot bigger! I see a couple of 1974 Duster kits up there. Any chance you have a 1975 or 1976 Duster MPC kit? There's some parts I need for a build on those kits. Mostly the grill. I've also send this pics to a few Dodge Truck fans... Thanks, DusterJoe Quote Link to comment Share on other sites More sharing options...
Can-Con Posted February 15, 2021 Share Posted February 15, 2021 (edited) On 1/15/2021 at 5:18 AM, tuffone20 said: It’s gotten a lot bigger! Marty, have you guys thought about offering a transkit to backdate the available Dodge van to a mid'70s version. There seems to be some interest in vans again and we know the chances of Round 2 backdating the kit are slim to none. Maybe also offer some options for it like a fender flares and air dam kit and possibly a custom tube grille front end. Edited February 15, 2021 by Can-Con 1 Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted February 15, 2021 Author Share Posted February 15, 2021 We do have plans to cast some of the Dodge van stuff. A window van will be one for sure. 1 Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted February 15, 2021 Author Share Posted February 15, 2021 4 hours ago, DusterJoe said: I see a couple of 1974 Duster kits up there. Any chance you have a 1975 or 1976 Duster MPC kit? There's some parts I need for a build on those kits. Mostly the grill. I've also send this pics to a few Dodge Truck fans... Thanks, DusterJoe I don’t have the 75 or 76 Duster kits. Just the two 74’s and a 73. Some day I plan on building a model of my 74 Duster. M Quote Link to comment Share on other sites More sharing options...
Repstock Posted February 15, 2021 Share Posted February 15, 2021 1 hour ago, tuffone20 said: I don’t have the 75 or 76 Duster kits. Just the two 74’s and a 73. Some day I plan on building a model of my 74 Duster. M I've got a Duster promo the same color! I also have those wheel covers. If you're so inclined, Krylon Short Cuts Bonnet Blue (spray enamel) is a very close match. (KSCS070) Quote Link to comment Share on other sites More sharing options...
tuffone20 Posted February 15, 2021 Author Share Posted February 15, 2021 59 minutes ago, Repstock said: I've got a Duster promo the same color! I also have those wheel covers. If you're so inclined, Krylon Short Cuts Bonnet Blue (spray enamel) is a very close match. (KSCS070) Thanks I have some Scale Finishes paint in the Powder blue for it. But I’d like to see those wheel covers? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.