Sam I Am Posted January 9, 2021 Share Posted January 9, 2021 Finally decided to go with this. I received the cab in a trade with Jeff, and he said it was designed for a Titan chassis. (little does he know how many questions he is in for ?) So here is the starting point. The rest of the chassis will come from the parts box. First question. The Titan had a sleeper, this obviously does not. I personally think the truck would look better if I shortened the frame. Since I have not altered a frame on one of these, where should I take the section out, and how much should I take out. TIA Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted January 9, 2021 Share Posted January 9, 2021 Sam nice combination. When you are deciding on your frame length take the over hang on the trailer into consideration. Quote Link to comment Share on other sites More sharing options...
leafsprings Posted January 9, 2021 Share Posted January 9, 2021 Great to see another classic being built! The GMC and haulaway both date to the early 60's. Hope this data helps. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted January 9, 2021 Share Posted January 9, 2021 Yeah !!! I knew the CB was in good hands . Really looking forward to your build Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted January 9, 2021 Share Posted January 9, 2021 I’ve been wanting to build one of these for years. This will be a very cool build. I’m not sure what engine you have in mind but remember that the engine tunnel is pretty cramped so make sure that you have clearance before you make anything permanent. Also the radiator will set much lower than the Titan and the fan will run off of the crank. Looking forward to seeing this one! Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 9, 2021 Author Share Posted January 9, 2021 WoW! Thanks guys! I have not even looked online for reference material yet. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted January 9, 2021 Share Posted January 9, 2021 Sam thats where I ran into trouble was getting the engine fitting under floor . Jim b suggested a frame that drops down in front to allow radiator to sit low enough. I had a gw 6 - 71 under the cab but the wrong frame ( w/ f ) really fought me You'll have much more success, and its gonna be a great looking truck I'm planning a Dodge cab soon Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 9, 2021 Author Share Posted January 9, 2021 Thanks Jeff. Say, what paint did you use on the cab? Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted January 9, 2021 Share Posted January 9, 2021 Cab is painted w tamiya mica red , primer should be their fine white . Dunno whether i cleared it , it would've been testors wet look if so Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 9, 2021 Author Share Posted January 9, 2021 14 minutes ago, gotnitro? said: Cab is painted w tamiya mica red , primer should be their fine white . Dunno whether i cleared it , it would've been testors wet look if so Thanks! Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 9, 2021 Author Share Posted January 9, 2021 9 hours ago, Mopar - D said: Sam nice combination. When you are deciding on your frame length take the over hang on the trailer into consideration. So after mocking up everything. Cab is on the frame where the instructions recommend, pin on the trailer is centered in between the axles. Looks like 3.25 . So maybe take out two inches? Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted January 10, 2021 Share Posted January 10, 2021 Sam you have to check on the upper part that overhangs. Check mine out. Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 10, 2021 Author Share Posted January 10, 2021 Thanks for that Dan. Looks like I should just build the trailer first. Quote Link to comment Share on other sites More sharing options...
Bronzekeg Posted January 10, 2021 Share Posted January 10, 2021 I love the old cabovers, looking good. following. Quote Link to comment Share on other sites More sharing options...
Pete68 Posted January 11, 2021 Share Posted January 11, 2021 Nice choice Sam Quote Link to comment Share on other sites More sharing options...
Olskoolrodder Posted January 11, 2021 Share Posted January 11, 2021 Very cool! Quote Link to comment Share on other sites More sharing options...
Bills72sj Posted January 11, 2021 Share Posted January 11, 2021 Yes, build the trailer first or at least mock it up enough. The upper level overhang and the overhang of long car can be your guide. Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 11, 2021 Author Share Posted January 11, 2021 (edited) Thanks for confirming that for me Bill. I noticed that on the box the trailer had five spoke rims, and thought to myself, "cool". Big disappointment when I opened the box, just regular wheels. Fortunately I have a few extra sets of five spoke trailer wheels. I think I will go with a Detroit... Edited January 11, 2021 by Sam I Am Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted January 11, 2021 Share Posted January 11, 2021 Cant go wrong w a Detroit!!! Hopefully you'll have clearance enough if ya choose the 8v Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted January 11, 2021 Share Posted January 11, 2021 11 hours ago, Sam I Am said: Thanks for confirming that for me Bill. I noticed that on the box the trailer had five spoke rims, and thought to myself, "cool". Big disappointment when I opened the box, just regular wheels. Fortunately I have a few extra sets of five spoke trailer wheels. I think I will go with a Detroit... 48 minutes ago, gotnitro? said: Cant go wrong w a Detroit!!! Hopefully you'll have clearance enough if ya choose the 8v Great choice for an engine. It will be a tight fit, but don’t get frustrated. Sometimes resin and kit manufacturers alike don’t get the floor pan exactly right. Don’t be afraid to trim or even make a new pan. I have had to completely remake a floor pan before. A good example was my H-63 Mack that I put a 12v-71 in. As you can see on the real deal, it is a tight fit. Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 11, 2021 Author Share Posted January 11, 2021 (edited) 54 minutes ago, gotnitro? said: Cant go wrong w a Detroit!!! Hopefully you'll have clearance enough if ya choose the 8v So are you telling me when I shorten the frame, don't stop there? Edit: just saw your post Brian. Thanks for that pic...I think. lol Edited January 11, 2021 by Sam I Am Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted January 11, 2021 Share Posted January 11, 2021 Sam - glad Brian chimed in with more info , he's built more cab overs and know the tricks ! I just rushed thru causing myself issues lol Squirrels had me looking at other ideas right after opening the box Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted January 11, 2021 Share Posted January 11, 2021 (edited) 7 hours ago, Sam I Am said: So are you telling me when I shorten the frame, don't stop there? Edit: just saw your post Brian. Thanks for that pic...I think. lol I have a few reference photos if you need any, I will be glad to post them. This was a sleeper cab, but should be the same as yours as far a mounting, because as you can see the sleeper is just over hang. Edited January 11, 2021 by DRIPTROIT 71 Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted January 11, 2021 Author Share Posted January 11, 2021 Thanks Brian, I would appreciate those pics for future reference. Right now,, for mock up sake, I would like to know if the Titan location for the engine is ok, or if I need to lower it in the frame. Oh, and I started looking for reference pics. The first two are what I am going after, the last ones are squirrels. ? Quote Link to comment Share on other sites More sharing options...
DrKerry Posted January 11, 2021 Share Posted January 11, 2021 Good project Sam, looks like you're heading in the right direction!!! Ought to be a kooooooolllll project to follow!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.