Jump to content
Model Cars Magazine Forum

(HRM) Shelby Cobra Daytona Coupe


Recommended Posts

Well played J6.   
my photo 2 has a bracket behind the tire that appears to serve no purpose - but with your picture we now know it’s purpose - it would have held the left fr jack on this car - which was removed when ?  Dr Simione would probably know - but I don’t live in Philly - I would want to know if the Simione car ran the Salt Lake trial with jacks ….   Hmmm

Link to comment
Share on other sites

Thanks for highlighting that J6/David... And yes, the Daytona Coupes were the first cars ever to use those air jacks.

Here’s where I saw it.... great little video!

 

Edited by Venom
Link to comment
Share on other sites

On 9/8/2021 at 2:07 PM, MarkJ said:

The corvette grand sport I just built had the pneumatic jacking system and I installed it the best I could. it was a tripod setup with one jack in the back in the middle and 2 up front at the firewall. 

After I went to the trouble of putting the jacks on the model, I found out that the jacking system was not used in the car that I modeled from the Nassau tourist trophy race that he won in. All that work for nothing.

Link to comment
Share on other sites

  • 2 weeks later...

Hi all...

I never really thought to re-post the parts pics from page one to show which parts were currently being used, so I’m doing it here.   ...I’ll give Jhedir6 (David) the nod for that idea👍

Installing the headers was a tad bit fussy, but actually easier than expected. For me, they fit so snugly that they held themselves in place without any glue at all. The side pipes along the body panel have two nubs that fit into the holes in the body which also were not glued. There are P/E metal straps that will wrap around the side pipes and hold them secure to the body- those pieces will be glued. I did glue the foremost header on each side just to add some rigidity.

The foot boxes fit so snugly between the firewall and headers that I thought they were going to be a nightmare. I did have to do a tiny amount of X-acto work on one of them so that it could sit straight, but otherwise they were quite painless getting into place.

Absmiami.... I did not have to curse your name after all.... The steering shaft was tricky and needed some trimming to fit, but I was able to get it in place on the 12th try.... escaping 13 by a hair.😅

9F50615B-A144-42C1-AD9E-281F34735A04.jpeg.1c68cabe769ce0663e2f3651e954203d.jpeg

C511C2F5-D0F0-4F1F-B2DD-EF355B4C1BB5.jpeg.fa1d62bb2545e06d27ac9dfc6d2403cd.jpeg

2F5A315C-E8F9-4B34-9B6D-E3DD1C77B60C.jpeg.fbbe970e79db19182cab55cb2d4231cd.jpeg

0E5B3D3D-163F-4D13-9D78-1B03D91924AF.jpeg.bf5d1beee0cfaa1edc2786c3b78c2c2b.jpeg

B843965B-26EF-4990-97B1-7365E85062F7.jpeg.71a5b5709ceabd93fc809c18910d1951.jpeg

23AC90D7-7D86-47FA-BDC8-96A446649B93.jpeg.78358d638bd79a136e81450aa68d01be.jpeg

04D26C7D-1E5B-4750-BFCA-2889DF1CC2A0.jpeg.29e2c1c18be15cd05967c3603a094b62.jpeg

76989E19-405D-4DC1-922F-DA3546DC4344.jpeg.eca5e5658058cefb4e4914929832a815.jpeg

Link to comment
Share on other sites

  • 3 weeks later...

Having some trouble getting the hood installed properly. The front chassis brace (part 6D) which I already had glued in place snapped when I tried to remove it. The part has to be flawlessly positioned and cemented in order to have any hope of the hood opening and closing with accuracy since it’s what the hood hinge brackets ride on. Since the part is broken and unusable, I have ordered a replacement part.... I’m hoping to only have to post one or two more segments before calling this WIP done.... Meanwhile here’s what I’ve got for you all.... Thanks for your interests throughout🤠

CADEC352-24E6-4AD8-93F0-9635AFD669F9.jpeg.6efc4cbb7158e3754e8f6d1698b4f9c4.jpeg

B006F24B-5741-43AA-925D-690F182CFC7A.jpeg.c5930fe4b7757220ddd92fe46ad5a90b.jpeg

 

5C0FABB1-C9ED-43AE-AA3B-AD772D70045D.jpeg.95551b4c26cf30f9963b86206f4314c7.jpeg

0CD1DC18-EDEF-485B-B642-029DE92F3996.jpeg.7c0e4a7777e0098ac433df9f074b7eec.jpeg

Edited by Venom
Link to comment
Share on other sites

22 minutes ago, vamach1 said:

Glad to see it’s close to completion and thanks for documenting all the steps along the way.

Rex, I will be taking it offline after the next post or two so that I can focus on all the many little details. Since I was doing this WIP as an aid to those who wish to build it, most of the tricky things are now finished, except the hood, which I may only partially show in the WIP. Most everything that’s left, as far as kit parts are concerned, are pretty easy to figure out from here on out, but a couple more posts may be needed. Most further additions to the kit, if one desired to, would have to be scratch built and I do not wish to bore everyone with all the fussy little details, including decals that I plan to add. After I get everything done I will still need time to get photos completed for the “Under Glass” section, so don’t be expecting finished pics anytime soon.

Edited by Venom
Link to comment
Share on other sites

2 hours ago, Len Woodruff said:

Wow. Really good fit on the hood.

Len, the hood is not yet attached to the front chassis brace.... I can tell that getting a good fit once attached to the brace is going to take absolute precision.... I simply sat the hood on and propped it up with a clothespin for the photos. We will see how it goes once I get the new chassis brace.

........ Thanks Ray and Abs.... Still a lot to do.

Edited by Venom
Link to comment
Share on other sites

9 hours ago, Venom said:

Len, the hood is not yet attached to the front chassis brace.... I can tell that getting a good fit once attached to the brace is going to take absolute precision.... I simply sat the hood on and propped it up with a clothespin for the photos. We will see how it goes once I get the new chassis brace.

........ Thanks Ray and Abs.... Still a lot to do.

The brace seems to be the issue with the fit. I broke the resin one and made a new one out of brass rod. 

Link to comment
Share on other sites

On 10/12/2021 at 6:18 AM, MarkJ said:

Looking great, Josh. Will be awesome when finished.

Thanks Mark... Hopefully the hood alignment won’t fight me too awful hard.

 

21 hours ago, jaymcminn said:

I've been working on HRM's engine/transaxle kit for the Fujimi Ferrari 330 p4. It's given me an appreciation for what you've done with this awesome kit. Great work!

Thanks Jason... This has been the most challenging, patience requiring modeling project I’ve ever gotten into so far. Very different from what I’m used to. Doing a WIP online has been an experience in itself.

...I just went onto modelbuilderswh.com and checked out the Ferrari P4 engine kit you mentioned and it is very impressive. I think I counted 49 parts, wow! Take your time savoring every morsel of that one👍

 

Edited by Venom
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...