doorsovdoon Posted February 5, 2021 Share Posted February 5, 2021 (edited) This is my first BRBO on the forum, this is an old AMT kit from the mid 80's that never got built. I was expecting all sorts of trouble, being that the kit is so old, high parts count and all the horror stories of old AMT fit issues, but I can honestly say this kit went together like Lego with not one fit issue, even the decals on a mouldy looking sheet of paper went on perfectly. In fact, they laid down better than some modern decals I've used. I was able to move them around for ages without tearing them and they sink down over the panel gaps and rivets like paint! The only trouble I encountered, more a minor inconvenience really, was the exhaust stack support frame. The instructions don't make it clear which bar go's where or how they are fixed in place, but ten minutes of test fitting had that sorted. I also chopped an inch out of the frame as I didn't like how long it looked. I thoroughly enjoyed every minute of this build and if it ever gets released again I'll certainly be buying a couple for sure. Edited February 5, 2021 by doorsovdoon 1 Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 5, 2021 Author Share Posted February 5, 2021 1 Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 5, 2021 Author Share Posted February 5, 2021 Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 5, 2021 Author Share Posted February 5, 2021 Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 5, 2021 Author Share Posted February 5, 2021 1 Quote Link to comment Share on other sites More sharing options...
TECHMAN Posted February 5, 2021 Share Posted February 5, 2021 😎😎😎 Very Nice!!! Good clean build with "just the right amount" of detail!!!! Great color choice too!!! DJ Quote Link to comment Share on other sites More sharing options...
DRIPTROIT 71 Posted February 5, 2021 Share Posted February 5, 2021 Beautiful build! The interior looks great too! Excellent work!! Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted February 6, 2021 Share Posted February 6, 2021 Very nice KW! Quote Link to comment Share on other sites More sharing options...
Hmann68 Posted February 6, 2021 Share Posted February 6, 2021 Great looking KW! Nice work 👍 Quote Link to comment Share on other sites More sharing options...
tbill Posted February 6, 2021 Share Posted February 6, 2021 That is a gorgeous build, love the colors. Personally, I’d have a talk with whoever is putting fuel in this truck, they seem to spill quite a bit😁 Quote Link to comment Share on other sites More sharing options...
Olskoolrodder Posted February 6, 2021 Share Posted February 6, 2021 Wow, it turned out really great, my friend, looks 1:1/real! Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 6, 2021 Author Share Posted February 6, 2021 9 hours ago, tbill said: That is a gorgeous build, love the colors. Personally, I’d have a talk with whoever is putting fuel in this truck, they seem to spill quite a bit😁 Thanks, Tom. That'll be the perished cap seals, I've told him to get them sorted! Lol Quote Link to comment Share on other sites More sharing options...
Dutzie Posted February 6, 2021 Share Posted February 6, 2021 Very sharp looking rig! Quote Link to comment Share on other sites More sharing options...
grodudulle77 Posted February 6, 2021 Share Posted February 6, 2021 Very nice rig, i really like the colors !! 😀👍 Quote Link to comment Share on other sites More sharing options...
Doug 1061 Posted February 6, 2021 Share Posted February 6, 2021 That turned out real nice. Gotta love the vague at best AMT instruction sheets. I'll have to grab one of these next time it rolls around. I recently built a Revell K100. Also a very nice kit aside from the major flash on every part. Quote Link to comment Share on other sites More sharing options...
angelo7 Posted February 6, 2021 Share Posted February 6, 2021 Absolutely beautiful. Where did you cut the frame? I got the same kit and also want to cut it. Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 6, 2021 Author Share Posted February 6, 2021 (edited) 1 hour ago, Doug 1061 said: That turned out real nice. Gotta love the vague at best AMT instruction sheets. I'll have to grab one of these next time it rolls around. I recently built a Revell K100. Also a very nice kit aside from the major flash on every part. Thanks, Doug. I have heard the Revell kit has lots of flash, not something that bothers me but from some of the builds I've seen they have some really bad pin ejector marks on the frame that interfere with the cross beams. 44 minutes ago, angelo7 said: Absolutely beautiful. Where did you cut the frame? I got the same kit and also want to cut it. Thanks, Angel. I cut it at the cross beam, the one in-between the fuel tanks and mud guards. My WIP thread will show how it was done. Edited February 6, 2021 by doorsovdoon Quote Link to comment Share on other sites More sharing options...
angelo7 Posted February 7, 2021 Share Posted February 7, 2021 2 hours ago, doorsovdoon said: Thanks, Angel. I cut it at the cross beam, the one in-between the fuel tanks and mud guards. My WIP thread will show how it was done. Thanks ! Quote Link to comment Share on other sites More sharing options...
ChrisR Posted February 7, 2021 Share Posted February 7, 2021 Looks great! Quote Link to comment Share on other sites More sharing options...
Jim B Posted February 7, 2021 Share Posted February 7, 2021 Great looking KW. Well done. Quote Link to comment Share on other sites More sharing options...
drinkone2 Posted February 8, 2021 Share Posted February 8, 2021 Looks great with the shortened frame, very nice work! Quote Link to comment Share on other sites More sharing options...
doorsovdoon Posted February 9, 2021 Author Share Posted February 9, 2021 16 hours ago, drinkone2 said: Looks great with the shortened frame, very nice work! Thanks. I like that the kit came with a long chassis, it's easier to remove material than it is to add it. If it ever gets released again I'd love to build a grain truck using the long chassis. Quote Link to comment Share on other sites More sharing options...
slusher Posted February 17, 2021 Share Posted February 17, 2021 Beautiful semi and very clean! Quote Link to comment Share on other sites More sharing options...
Bronzekeg Posted February 18, 2021 Share Posted February 18, 2021 great job on the build and pictures. Quote Link to comment Share on other sites More sharing options...
Jim Whalen Posted February 19, 2021 Share Posted February 19, 2021 Nice build! If you want to buy a new one, the Tyrone Malone's Kenworth Aerodyne 'Hide Out Truck' Transporter kit would fit the bill - just omit the race car hauler body. McLaren Models in Falkirk is a good place to buy AMT kits in the U.K., they have this kit on Page 8 of their AMT section for £39.99. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.