kpnuts Posted March 27, 2021 Share Posted March 27, 2021 It was supposed to arrive Monday cost 73 quid in customs charges then they wanted 12 quid to deliver it today, I didn't pay it but it still arrived today. I'm sooo excited. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted March 29, 2021 Author Share Posted March 29, 2021 Made a start on this primed the main body and glued the main part of the engine together, added some 1/24 scale kits for size ref. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted March 30, 2021 Author Share Posted March 30, 2021 Start on painting the engine. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted March 31, 2021 Author Share Posted March 31, 2021 Got the white on next is masking up for the blue, also got some of the engine and gearbox done. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 1, 2021 Author Share Posted April 1, 2021 I wasn't happy with the scale of the kit supplied fuel lines (nearly double the size they should have been at just over 1mm (the actual lines are a tad over 6mm) The only photo ref I have atm is this I know they are metal in the pic but back then they were clear nylon because they were lighter than metal ones but when they added more ethanol to modern fuel they started to fail (the nylon ones that is) and so modern cars have metal, anyway I've gone of subject metal ones is the only ref I have atm and the nylon ones were a tad smaller so the kit ones are definitely over scale. I stretched the kit ones which made them thinner. I've done some weathering on the engine as well and added a few ancillary parts. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 4, 2021 Author Share Posted April 4, 2021 OK so a little bit of added detail (and it is little) Take a piece of solder and flatten it. Cut into 7mm lengths paint the tip satin black put a couple of bends in it, repeat 12 times and you have sparkplug retaining clips. Take some heat shrink tubing cut into 2mm lengths Add to end of plug leads and you have plug caps Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 4, 2021 Share Posted April 4, 2021 Beautiful job! This car seems to slip thru the cracks for Porsche fans. It is a really cool car . I have a gold box version. Even tried to trade it here but no interest. Glad I did not trade it. Will go great with the future Porsche builds. I will be watching and learning. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 4, 2021 Author Share Posted April 4, 2021 Thanks mate. Quote Link to comment Share on other sites More sharing options...
JohnnyK Posted April 7, 2021 Share Posted April 7, 2021 Looking good. I love building 1/12 scale models, especially the engines. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 17, 2021 Author Share Posted April 17, 2021 Hi all more done on this. Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 18, 2021 Share Posted April 18, 2021 Very nice!!!! Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 18, 2021 Author Share Posted April 18, 2021 I've sanded down the bleed through and Resprayed the white, you can still the blue through it, unsure whether to give it another coat since I'm going to spray the bule again in the same place. Quote Link to comment Share on other sites More sharing options...
JohnnyK Posted April 19, 2021 Share Posted April 19, 2021 Very nice looking work. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted April 21, 2021 Author Share Posted April 21, 2021 Bit more work on this one. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted May 1, 2021 Author Share Posted May 1, 2021 You wouldn't believe how hard the suspension on this is and don't get me started on the connection of the wheels to the drive shafts. I've started scratching the slide throttle linkage for it, the guys at work hate this system, there is a plate with 3 holes in it the size if the venturi of the flutes that runs on bearings and slides forwards and backwards to enlarge or reduce the air fuel ratio by sliding the hole thus reducing or enlarging the venturi, it's prone to leaks and not a great system. This car had other throttle linkage systems which were better but the one depicted in the kit is this one so (as it's the car I've worked on it's the one I will try to depict) Quote Link to comment Share on other sites More sharing options...
kpnuts Posted May 2, 2021 Author Share Posted May 2, 2021 OK some pics of progress so far, I really don't like the tamiya idea of doing the suspension, it's s=€t took ages to do and is very fragile (must be why they give you one extra of each suspension part) I generally like tamiya kits but not a fan of this one for design of assembly luckily I didn't do the suspension in the order tamiya suggest as it would have been even harder to accomplish done in the way the instructions suggest. [img]https://i.ibb.co/rHJB6NV/IMG-6868.jpg[/img] [img]https://i.ibb.co/k5vXZSX/IMG-6869.jpg[/img] [img]https://i.ibb.co/0YhhmV4/IMG-6870.jpg[/img] [img]https://i.ibb.co/61dC1Jv/IMG-6871.jpg[/img] [img]https://i.ibb.co/Tk7Pz0N/IMG-6872.jpg[/img] [img]https://i.ibb.co/M5g7SZg/IMG-6873.jpg[/img] [img]https://i.ibb.co/177jJjt/IMG-6876.jpg[/img] [img]https://i.ibb.co/Bgx0151/IMG-6877.jpg[/img] [img]https://i.ibb.co/0y3KBfV/IMG-6881.jpg[/img] Quote Link to comment Share on other sites More sharing options...
beeRS Posted May 3, 2021 Share Posted May 3, 2021 This is looking great so far. I’m surprised by the suspension fitting issues. Tamiya stuff is usually brilliant. I like what you did with the fuel lines. Apparently, those sliding throttle plates are terrible on part throttle. They’re never used for road cars, but I can imagine how, in theory, they’d be perfect on full throttle! Quote Link to comment Share on other sites More sharing options...
kpnuts Posted May 3, 2021 Author Share Posted May 3, 2021 Did more work on the 910 made the porsche decals for the side (quite pleased with them) masked and painted the windscreen and built the dashboard. Working on the font for the number 20 (proving quite difficult) [img]https://i.ibb.co/d4PSXX2/IMG-6897.jpg[/img] [img]https://i.ibb.co/WKn5c4D/IMG-6896.jpg[/img] [img]https://i.ibb.co/Jmdn6Zd/IMG-6895.jpg[/img] [img]https://i.ibb.co/fQw7sNm/IMG-6893.jpg[/img] [img]https://i.ibb.co/Hx1ngx1/IMG-6892.jpg[/img] [img]https://i.ibb.co/z6tJMYy/IMG-6891.jpg[/img] [img]https://i.ibb.co/19JYFsr/IMG-6890.jpg[/img] [img]https://i.ibb.co/9g5K4fF/IMG-6894.jpg[/img] Quote Link to comment Share on other sites More sharing options...
kpnuts Posted May 6, 2021 Author Share Posted May 6, 2021 Sorry none of my pics show after the latest update (strange it all works everywhere else and I've not changed anything) Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 7, 2021 Author Share Posted July 7, 2021 Can anyone tell me what in the forum update changed to stop me posting pics Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 18, 2021 Author Share Posted July 18, 2021 OK this was finished ages ago but I'm going to try what a few kind forum members have suggested, so here goes if it works here is the finished article. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 18, 2021 Author Share Posted July 18, 2021 Great that worked. I'm back woo how. Quote Link to comment Share on other sites More sharing options...
Dave Ambrose Posted July 18, 2021 Share Posted July 18, 2021 On 5/3/2021 at 1:09 PM, kpnuts said: Did more work on the 910 made the porsche decals for the side (quite pleased with them) masked and painted the windscreen and built the dashboard. Working on the font for the number 20 (proving quite difficult) [img]https://i.ibb.co/d4PSXX2/IMG-6897.jpg[/img] [img]https://i.ibb.co/WKn5c4D/IMG-6896.jpg[/img] [img]https://i.ibb.co/Jmdn6Zd/IMG-6895.jpg[/img] [img]https://i.ibb.co/fQw7sNm/IMG-6893.jpg[/img] [img]https://i.ibb.co/Hx1ngx1/IMG-6892.jpg[/img] [img]https://i.ibb.co/z6tJMYy/IMG-6891.jpg[/img] [img]https://i.ibb.co/19JYFsr/IMG-6890.jpg[/img] [img]https://i.ibb.co/9g5K4fF/IMG-6894.jpg[/img] Let's see how these work: Quote Link to comment Share on other sites More sharing options...
Dave Ambrose Posted July 18, 2021 Share Posted July 18, 2021 I think I know what was going on. There were "[img]" and "[/img]" tags around your images. Those seem to mess everything up. If you just paste the straight URL (the text between the tags), the board is smart enough to identify them as images and embed them into your post. I'll repost this over in the How to Use this Board section. Quote Link to comment Share on other sites More sharing options...
kpnuts Posted July 18, 2021 Author Share Posted July 18, 2021 Thanks dave Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.