Luis Ayala Posted May 11, 2021 Share Posted May 11, 2021 (edited) Started this project about a year ago so I will share a couple of the progress pics up to the stage it is right now. I wanted to build three versions of this one so I extended the chassis with the supports to be able to use either a stepside, a fleetside or a short bed dually. I already casted the chassis and the interiors. The dually bed is in progress but for this one I will only cast the wheel fenders to be attached to a donor fleetside bed. The cab is almost done so hopefully will be able to cast it while on vacation next month. Is not perfect but I am very happy with the results so far. Hope you like it and thanks for looking!!! Started with two Revell stepside 2 in 1 kits to make the extended cab. Then, extended the chassis and modified the front & rear suspension to get the stance I wanted. Then Molded & Casted the chassis to be able to build the three versions, Stepside, Fleetside and Dually. Then Put together the interior door panels. The rear panel was cut to size to match the door. Then Casted the Interiors. Next step was to built the cab floor pan and the matching interior tub base so both seats were set at the same height and the door panels match the window openings. Then cut the wheel fenders from a stepside donor bed, extend them and use a donor fleetside bet to make the dually. I may cast only the fenders but I guess it would be better to just cast the complete bed to avoid so much work in the future... Here you will see a test fit of the fleetside bed on the same chasiss and a mockup of the Dually on the works. And Finally the first one is almost ready to paint. Some minor fixes on the interior on the cab, cast it and then continue to work on the engine and interiors. The rims are the ones I selected for the Fleetside and the bed cover is just a piece of .20 styrene matched to the top of the bed. As I said is far from perfect but it has been a really fun project. Hope you like it and thanks for looking. Edited May 11, 2021 by Luis Ayala Duplicate Picture Deleted 1 Quote Link to comment Share on other sites More sharing options...
Tom Geiger Posted May 11, 2021 Share Posted May 11, 2021 That is cool! I’d buy one of those cabs! Quote Link to comment Share on other sites More sharing options...
iamsuperdan Posted May 11, 2021 Share Posted May 11, 2021 The fleetside look killer. Excellent work so far! Quote Link to comment Share on other sites More sharing options...
gautreau Posted May 11, 2021 Share Posted May 11, 2021 Awesome job grafting the 2 cabs together! Quote Link to comment Share on other sites More sharing options...
Mad Slammer Posted May 12, 2021 Share Posted May 12, 2021 Nice work... I’ve seen it and it’s very high quality work... Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted May 12, 2021 Share Posted May 12, 2021 Yes, nice work on that cab! Nice work on everything so far!👍 Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted May 12, 2021 Author Share Posted May 12, 2021 Thank you all for your comments!!! I am glad you like it so far!!! Dan, Thank you for moving the post to the correct forum. I apologize, I didn't realize I was on the wrong spot when posting... Quote Link to comment Share on other sites More sharing options...
Kromolly Posted May 12, 2021 Share Posted May 12, 2021 Very cool! Your work is flawless. I love the crew cab look. I have a stalled WIP, fleetside long bed small window conversion that I need to get back to. Hard to find bench time this time of year. Nice work... keep it going! Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted May 12, 2021 Author Share Posted May 12, 2021 17 hours ago, Kromolly said: Very cool! Your work is flawless. I love the crew cab look. I have a stalled WIP, fleetside long bed small window conversion that I need to get back to. Hard to find bench time this time of year. Nice work... keep it going! Thanks Roy!! It is definitely hard to set some time for the workbench... Too many things going on and between work and family sometimes one can barely make it happen. I have been working on this one for more than a year now, so hopefully I will be able to finish it soon. Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted May 12, 2021 Author Share Posted May 12, 2021 This picture is the reference of what I am trying to accomplish, but without the side trim. I like the color scheme but really haven't decided yet. Here is some progress of the Short Dually bed. These are old pics, just part of the actual progress of the build. I have two sets of rims that you will see below, but still have to cut the bed wheel wells to set them in the right stance. For the dually I want the "bagged" look, just a hair above ground. I have to cast the cab first and then cut the inner fenders, this way I will not sacrifice the original cab I will use for the master cast. Hope you like it and thanks for looking!! Quote Link to comment Share on other sites More sharing options...
afx Posted May 13, 2021 Share Posted May 13, 2021 Great work. Quote Link to comment Share on other sites More sharing options...
avidinha Posted May 13, 2021 Share Posted May 13, 2021 Nice work, that looks awesome so far! I'm working on something similar. I widened the stepside fenders to make dually fenders, but I also made them taller so I could lay rocker on semi wheels. Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted May 13, 2021 Author Share Posted May 13, 2021 2 hours ago, avidinha said: Nice work, that looks awesome so far! I'm working on something similar. I widened the stepside fenders to make dually fenders, but I also made them taller so I could lay rocker on semi wheels. Thanks Andrew!!! The Chrome Rims you see in the first picture are the Moebius# MOE1010 set. Those are Big Rig wheels but with Pegasus 23" low profile tires that fit like a glove on them. Still have to notch the chassis and cut the bed, but the low profile tires will give me more room to set the stance I want without sacrificing too much of the bed. Quote Link to comment Share on other sites More sharing options...
avidinha Posted May 14, 2021 Share Posted May 14, 2021 1 hour ago, Luis Ayala said: Thanks Andrew!!! The Chrome Rims you see in the first picture are the Moebius# MOE1010 set. Those are Big Rig wheels but with Pegasus 23" low profile tires that fit like a glove on them. Still have to notch the chassis and cut the bed, but the low profile tires will give me more room to set the stance I want without sacrificing too much of the bed. Gotcha, my wheel/tire setup is more like the white ones with the low pros from the Monte Carlo SS kit. I'm excited to watch the progress on yours. Quote Link to comment Share on other sites More sharing options...
1stgoat Posted May 14, 2021 Share Posted May 14, 2021 That is truly awesome work! Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted May 29, 2021 Share Posted May 29, 2021 Luis, This is some amazing work! I love the look you are going for. Can't wait to see it in paint. Will you be selling any of your casts? I'd love to get a cab, chassis and interior. Later- Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted May 31, 2021 Author Share Posted May 31, 2021 On 5/29/2021 at 9:54 AM, Modlbldr said: Luis, This is some amazing work! I love the look you are going for. Can't wait to see it in paint. Will you be selling any of your casts? I'd love to get a cab, chassis and interior. Later- Thanks Tom!!! I am glad you like the progress so far. I just send you a message regarding the casting. 👍 Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted June 1, 2021 Author Share Posted June 1, 2021 (edited) Just some small progress... I was able to get some bench time today and casted a few chassis for the other options I plan to build. Hope you like it and thanks for looking!! Edited June 1, 2021 by Luis Ayala Typo. 1 Quote Link to comment Share on other sites More sharing options...
Modlbldr Posted June 6, 2021 Share Posted June 6, 2021 Luis, Looks like some nice work! Looking forward to seeing the dually come together for sure! Later- Quote Link to comment Share on other sites More sharing options...
espo Posted June 8, 2021 Share Posted June 8, 2021 Been watching your build come together. Beautiful looking finish even factory looking proportions. Quote Link to comment Share on other sites More sharing options...
slusher Posted June 8, 2021 Share Posted June 8, 2021 impressive work! Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted June 8, 2021 Author Share Posted June 8, 2021 On 6/6/2021 at 2:17 PM, Modlbldr said: Luis, Looks like some nice work! Looking forward to seeing the dually come together for sure! Later- Thanks Tom!!! I just started vacations this week so hopefully will be posting more progress soon. 👍 Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted June 8, 2021 Author Share Posted June 8, 2021 22 hours ago, espo said: Been watching your build come together. Beautiful looking finish even factory looking proportions. Thanks David!! 👍 I tried to get it as close as possible as the reference pics I am using. I have seen some other custom builds where the extent of the back door is larger but I liked the back door being a bit shorter that the front one. It still needs some work inside and some finishing details but I am very happy with the results so far. Quote Link to comment Share on other sites More sharing options...
Luis Ayala Posted June 8, 2021 Author Share Posted June 8, 2021 9 hours ago, slusher said: impressive work! Thanks Carl !!! I am glad you like it!!! Will be posting more progress later this week. Quote Link to comment Share on other sites More sharing options...
bluestringer Posted June 12, 2021 Share Posted June 12, 2021 Wow, that is really nice. Excellent work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.