papajohn97 Posted June 27, 2021 Share Posted June 27, 2021 (edited) This was built from the less-than-stellar old AMT 1/25 Mustang “Funny Car” kit containing parts that don’t quite look like the actual Brannan car shown on the box: I attempted to build a Hilborn injected “match racer” version of this car (not complying with A/FX rules) and so I took a lots of liberties, particularly with the front end (solid axle with leaf springs) and omission of the radiator and belts (kind of an early pre-flipper funny car build). My goal was to try to approximate the stance shown on the box photo which I really liked. I thought about replacing the toy-like cammer SOHC kit engine with one of the new tooled engines out of the excellent Moebius ‘65 Comet A/FX kits but decided to try to make the best of it with the kit engine. The decal graphics supplied with the kit were quite inaccurate so Joe Curtis at Fremont Racing Specialties came to my rescue and made a fabulous set of replacements for me. Joe is incredibly talented and a great guy! This is not one of my better efforts, lots of errors and screw-ups, particularly on the paint and windows, but I’ve been bogged down for a few months on this and decided to wrap it up and move on. I didn’t list all the details above on changes/additions I did on this kit but shoot me any questions you might have and I’ll be happy to supply more details.Thanks for looking! John Edited June 27, 2021 by papajohn97 Corrected grammar error 1 1 Quote Link to comment Share on other sites More sharing options...
plasticprime Posted June 27, 2021 Share Posted June 27, 2021 I'd say you got the stance just right on this very nice build! Quote Link to comment Share on other sites More sharing options...
ChrisR Posted June 27, 2021 Share Posted June 27, 2021 Looks great! Quote Link to comment Share on other sites More sharing options...
David G. Posted June 27, 2021 Share Posted June 27, 2021 I think you nailed the stance and the overall feel of the 1:1. Well Done! David G. Quote Link to comment Share on other sites More sharing options...
Brutalform Posted June 27, 2021 Share Posted June 27, 2021 If it’s not one of your better efforts, sure fooled me. This is one fine model build. Super clean details. Looks VERY realistic. Quote Link to comment Share on other sites More sharing options...
Scott8950 Posted June 27, 2021 Share Posted June 27, 2021 Yea that looks very nice.. Quote Link to comment Share on other sites More sharing options...
larman Posted June 27, 2021 Share Posted June 27, 2021 It certainly looks good from here! Great job! Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 27, 2021 Author Share Posted June 27, 2021 Fixed the decals on the left side to match the actual car (reversed the “Ford” and “Stark-Hickey”) and added ‘427’ emblems to front fender (from Revell ‘64 Ford Thunderbolt kit, love it when they give you extra decals!). 1 Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted June 27, 2021 Share Posted June 27, 2021 Looks very, very good to me. Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted June 28, 2021 Share Posted June 28, 2021 Super nice! Quote Link to comment Share on other sites More sharing options...
Altered Ego Posted June 28, 2021 Share Posted June 28, 2021 Really nice job. I am hoping Moebius will make one alot closer to the real thing. Quote Link to comment Share on other sites More sharing options...
Reegs Posted June 28, 2021 Share Posted June 28, 2021 "I attempted to build a Hilborn injected “match racer” version of this car (not complying with A/FX rules)" ... The real money was in match racing, anyway. Great work, John! Quote Link to comment Share on other sites More sharing options...
Snake45 Posted June 29, 2021 Share Posted June 29, 2021 Looks fantastic! I'd say you nailed that stance you were going for. Well done and model on! Quote Link to comment Share on other sites More sharing options...
Bills72sj Posted June 29, 2021 Share Posted June 29, 2021 If I ever get this done, I'll race ya for Pinks. Quote Link to comment Share on other sites More sharing options...
R. Thorne Posted June 29, 2021 Share Posted June 29, 2021 (edited) I like it a lot. Where did you get the injector velocity stacks? Fuel pump and log scratch built? What did you use for the steel lines? Thanks in advance. Edited June 29, 2021 by R. Thorne Quote Link to comment Share on other sites More sharing options...
Len Woodruff Posted June 29, 2021 Share Posted June 29, 2021 Very well done. Loved the AWB Mustangs. Did you change the front straight axle from the kit? Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 29, 2021 Author Share Posted June 29, 2021 Thanks everyone for the compliments, so nice to share builds here and not just add them to the big plastic storage box in the top of my side of the bedroom closet to be forgotten! The injector velocity stacks and front leaf springs are from speedcityresin.com. The distributor, plug wires and looms are from Detail Master. The fuel lines are made from 0.5 mm solder and the fuel pump and fuel log junction is scratch built from styrene rod and sheet. I used a round piece of photo etch from my spares box for the front bulkhead detail on the fuel pump, this piece probably coming from an Eduard 1/32 aircraft PE set. I did replace the kit supplied straight axle with a scratch-built one I made from styrene rod that allowed me to lower the front of the car. I also had to incorporate scratch-built engine mount brackets from .04” sheet styrene onto the kit supplied tubular front clip to adjust the engine position relative to the front axle to support the final stance. 1 Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 29, 2021 Author Share Posted June 29, 2021 Hey Bill72sj, you’re on, let’s go! May the faster cammer win! Love the amazing job you’re doing on that sweet ‘67, keep going please! I have the Revell 1/24 ‘65 2+2 kit in the stash with an extra Moebius ‘65 Comet Dyno Don A/FX kit for the donor SOHC that I want to use to build Les Richey’s non-AWB car: Hoping the 1/25 wide cammer engine will fit into the 1/24 engine bay with a minimal amount of mods. A pair of big Fireball Holley’s on the top should help fool the eyes that it’s all of one scale. I’m just waiting for some custom decals before I start. Quote Link to comment Share on other sites More sharing options...
bogger44 Posted June 29, 2021 Share Posted June 29, 2021 Very impressive, even if it's not your best work! That stance is much better than what the kit does out of the box. Great job on bringing that big old Cammer to life too. I've been tempted lately to build mine, and will use yours as an inspiration and guide of sorts when I do. How did you remove the rear quarter window louvers, and, did you make those windows or get some from another kit? Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted June 30, 2021 Author Share Posted June 30, 2021 Thanks Bogger44, I removed the rear quarter windows by drilling out the inside profiles with a small drill (1/16”?) cutting the remaining connections with an X-acto, cleaning up the rough edges with the same X-acto and then taking a course, medium snd fine sanding sticks to clean up the final frame. It’s an easy mod to do. I used the kit part for the front/ rear glass and .005” thick clear styrene sheet for the sides. Quote Link to comment Share on other sites More sharing options...
slusher Posted July 2, 2021 Share Posted July 2, 2021 Looks superb! Quote Link to comment Share on other sites More sharing options...
bisc63 Posted January 31, 2022 Share Posted January 31, 2022 Very nice; really captures the look. Quote Link to comment Share on other sites More sharing options...
stevez Posted February 2, 2022 Share Posted February 2, 2022 Looks great 👍 Quote Link to comment Share on other sites More sharing options...
deuces wild Posted February 2, 2022 Share Posted February 2, 2022 Beautiful!....😍🥰 Quote Link to comment Share on other sites More sharing options...
MeatMan Posted February 3, 2022 Share Posted February 3, 2022 Very nice! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.