papajohn97 Posted August 11, 2021 Share Posted August 11, 2021 (edited) This is one I've been building as a part of a Mustang group build on a British modeling forum, legendary racer/ tuner Les Ritchey's '65/66 Mustang A/FX 427 SOHC screamer. It's based on Revell's 1/24 kit in which I replaced the 289 small block with a 1/25 SOHC 427 from the Moebius '65 Comet A/FX Dyno Don kit. Lot's of mods and scratch-building was required to get this engine to fit as well as to incorporate the weird front torsion/ 1/2 leaf spring suspension that replaced the stock struts and shock towers. Headers were scratch-built using solder and the rear differential/ wheel openings and wheel wells were shifted 1/8" to correspond to the 3 inch wheel base shift that was done by Holman and Moody. Rear traction bars were scratch-built using the Revell '64 Thunderbolt part as a pattern. A roll bar was made using .100" OD styrene rod and our kitchen stovetop. After market parts that I added included Fireball Holley 4160 resin carbs, Detail Master distributor/ plug wires/ looms/ linkage and misc wires and springs. The teardrop hood is a 1/24 replacement for the Revell kit made by Competition Resins. The tires and Torque Thrust mags were taken from an AMT '62 Bel Air kit. The Body was painted using Tamiya Silver Leaf lacquer with TS-13 clear coat, window frames were metallized using Alclad Chrome over gloss black enamel and other paints used were mostly Tamiya acrylics. The key to making this project happen were the fabulous decals that Joe Curtis of Fremont Racing Specialties was kind enough to custom make for me - thank you Joe!!! I'm still toying with the possibility of adding air conduits between the carbs and the radiator bulkhead (similar to the '64 Thunderbolts) but it appears to be a "project within the project" so please don't hold me to it. I've enjoyed building 1/24-1/25 super stock drag car models from the early/ mid sixtes and these A/FX Mustangs have always been somewhat of a "Holy Grail" to me. It's wishful thinking on my part but maybe someday one of the model companies will tool a more accurate version of what I've tried to build here (Revell? Moebius? Meng?). Cheers, John Edited August 11, 2021 by papajohn97 spelling correction 7 1 Quote Link to comment Share on other sites More sharing options...
Scott8950 Posted August 11, 2021 Share Posted August 11, 2021 Very nice Quote Link to comment Share on other sites More sharing options...
echo Posted August 12, 2021 Share Posted August 12, 2021 What a nice build, your under carriage is exceptionally well done, you incorporated the changes they did to the front suspension and the subtle shift of the rear suspension. A job well done. I like the '65 A/FX Factory Mustangs and have one that I have worked on, off and on, mostly off, maybe your model will get me to finish it. Your model is probably the nicest example of a '65 Factory car that I have seen. Great Model ! Quote Link to comment Share on other sites More sharing options...
Zippi Posted August 12, 2021 Share Posted August 12, 2021 Nice looking Mustang. That silver body color looks pretty good. Nice job on the build. Quote Link to comment Share on other sites More sharing options...
PappyD340 Posted August 12, 2021 Share Posted August 12, 2021 Very nice! Quote Link to comment Share on other sites More sharing options...
afx Posted August 12, 2021 Share Posted August 12, 2021 Nice work. Quote Link to comment Share on other sites More sharing options...
cobraman Posted August 12, 2021 Share Posted August 12, 2021 Fine looking Mustang ! Quote Link to comment Share on other sites More sharing options...
MeatMan Posted August 13, 2021 Share Posted August 13, 2021 Very nicely done! I see you fabricated those funky front springs, too. 1 Quote Link to comment Share on other sites More sharing options...
fairlane1320 Posted August 16, 2021 Share Posted August 16, 2021 (edited) Fantastic build! I don't think I've ever seen one this accurate. Nobody seems to bother getting the rear wheels where they belong, or the correct front suspension. Job well done! 🤘 I'm a huge fan of these cars, have one long-term WIP and few more in the plans. Ritchey sure knew his way around a Ford race car, and the quarter mile. It's really sad that he died so young, and in such a horrifying manner. 😟 Edited August 16, 2021 by fairlane1320 Quote Link to comment Share on other sites More sharing options...
Bainford Posted August 18, 2021 Share Posted August 18, 2021 Beautiful build, John. One of the cleanest builds I've seen of any of the iconic Mustang A/FX cars. Very nicely done. Quote Link to comment Share on other sites More sharing options...
slusher Posted September 19, 2021 Share Posted September 19, 2021 Looks great! Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted September 26, 2021 Share Posted September 26, 2021 Real nice John!!👍 Quote Link to comment Share on other sites More sharing options...
M W Elky Posted March 12, 2022 Share Posted March 12, 2022 Great job you nailed it all that suspension work looks really nice. I can’t wait for the amt fast back that’s due out. I’ll have to get a dozen.Fred cady also printed decals for this + gas Ronda, and Tasca. Quote Link to comment Share on other sites More sharing options...
Swinger 340 Posted March 13, 2022 Share Posted March 13, 2022 Very nice build John Excellent work on the modifications, Very clean! Quote Link to comment Share on other sites More sharing options...
Ian McLaren Posted March 13, 2022 Share Posted March 13, 2022 Simply a great model, everything looks right. A complete model with no weak areas. Very well done! Quote Link to comment Share on other sites More sharing options...
steve Phelps Posted March 23, 2023 Share Posted March 23, 2023 Thank you for your tribute to Les' mustang. His wife was my Sunday School teacher. I had the pleasure of getting a ride from the pits to staging at Irwindale on my birthday in January 1966. Quote Link to comment Share on other sites More sharing options...
Hemifever Posted March 24, 2023 Share Posted March 24, 2023 Great build. Quote Link to comment Share on other sites More sharing options...
atomicholiday Posted March 24, 2023 Share Posted March 24, 2023 Excellent workmanship. Stunning build. Quote Link to comment Share on other sites More sharing options...
R. Thorne Posted March 24, 2023 Share Posted March 24, 2023 Outstanding. Quote Link to comment Share on other sites More sharing options...
Altered Ego Posted March 24, 2023 Share Posted March 24, 2023 This is an amazing job. I am gathering parts to do one of my own. It will be with the Model King body and I am going to do it as one that was altered later in the season. The Warbucks body is a 1/25th body, so I am torn on what to use for a chassis. If anyone has any ideas, feel free to post them. I am thinking of the additional altered wheelbase and a straight axle. Mine won't be as nice or accurate as yours. Quote Link to comment Share on other sites More sharing options...
papajohn97 Posted March 25, 2023 Author Share Posted March 25, 2023 Thanks guys for reviving an old A/FX build of mine from two years ago. I’ve been immersed in building planes, ships and tanks over these wet winter months and am ready for sunshine and spraying shiny lacquer paint again. This Mustang is one of around +25 1960’s super stock/ A/FX builds I’ve completed and am ready to build a few more. I’m really looking forward to that Moebius ‘65 AWB Dodge kit to hit the shelves and have several decal sheets ready to go. Altered Ego Jeff - I’ve had the same thoughts about the Round2 ‘66 fastback with the retooled body and was thinking maybe the Moebius A/FX SOHC ‘65 Comet kit (either Dyno Don or Arnie Beswick car) might be a suitable donor chassis for replacing the one-piece kit chassis in the Round2 kit? Both body and chassis would require a bunch of mods to fit together and to alter the front and rear wheel base but the Comet kit comes with a front suspension/chassis similar to the A/FX Mustang and no protruding shock towers within the engine bay. Wonder if someone here in this forum is already doing this????? Quote Link to comment Share on other sites More sharing options...
Mopar2 Posted March 25, 2023 Share Posted March 25, 2023 Very cool Mustang...All the work and detail shows.How great of a build it is...Nice job... Quote Link to comment Share on other sites More sharing options...
Rattlecan Dan Posted March 28, 2023 Share Posted March 28, 2023 Nice Job! Great Paint and Stance. Realistic. Thanks for Sharing. Quote Link to comment Share on other sites More sharing options...
jritchey Posted July 10, 2023 Share Posted July 10, 2023 WOW how amazing the more and more I learn about my uncle I never met. If anyone knows of where his actual car is today or any memorabilia can you please email me would love to learn more and purchase what anyone has. Thank you guys. 1 Quote Link to comment Share on other sites More sharing options...
fairlane1320 Posted July 26, 2023 Share Posted July 26, 2023 On 7/10/2023 at 1:22 AM, jritchey said: WOW how amazing the more and more I learn about my uncle I never met. If anyone knows of where his actual car is today or any memorabilia can you please email me would love to learn more and purchase what anyone has. Thank you guys. John, I have a huge interest in the Ford racers and race cars of the 60s, especially the AFX Mustangs. So, I've done a quite of bit of research on the history of the AFX cars. Your uncle ran the silver Mustang in 1965, and early 1966. He also ran a red Mustang briefly in 1966. It's not clear if there were 2 separate cars, or just one. I believe there were 2 cars, with the red car being destroyed in the accident that took his life. Where the silver car ended up is a mystery to me. If you can shine a light on any of this, I'm all ears! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.