Motor City Posted July 19, 2022 Share Posted July 19, 2022 Yes, there are a lot of great models in both scales. The trick is to display all of the 1/24th scale together. 1 Quote Link to comment Share on other sites More sharing options...
Richard Bartrop Posted July 19, 2022 Share Posted July 19, 2022 (edited) 12 hours ago, Plowboy said: That's 1/24 scale. Some people refuse to build in that scale for whatever reason. Their loss. Europe and Japan seem to be happy with 1/24. so the old Monogram stuff might go over well there. Edited July 20, 2022 by Richard Bartrop 1 Quote Link to comment Share on other sites More sharing options...
Mr mopar Posted July 27, 2022 Share Posted July 27, 2022 (edited) I see Amt is doing this kit ! Decal will be improved over the original. Edited July 27, 2022 by Mr mopar 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted July 28, 2022 Share Posted July 28, 2022 Cool kit Mr Mopar! Quote Link to comment Share on other sites More sharing options...
stavanzer Posted July 28, 2022 Share Posted July 28, 2022 On 7/15/2022 at 11:16 AM, Can-Con said: Agreed, it should have an a power steering pump and a Quadrajet carb but aside from that, it's a well detailed engine with a lot of separate parts. I've always considered it, along with the MPC Elcamino and Chevy pickup engines to be some of the best SBC engines available. I've found that the difficult part of the kit is the underhood area though because of how the firewall, windshield and sides of the body where it all comes together is kinda tricky to get right. Tom Gaffney (IIRC) in the old SAE Magazine, used to call the SBC in the MPC Monte on of the best Small Blocks out there in model form. It beats the stuffing out of the SBC in the Trumpeter Monte Carlo, that is for sure. MPC Had some nicely tooled SBC at the end of their life. Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted August 4, 2022 Share Posted August 4, 2022 Well, the AMT kit that I was most looking forward to personally arrived at the shop and I have one set aside for myself. All opened up it's no awful surprises and should be a fairly quick build. The highlight is easily that the wheels are both prototypical and well molded. The low light is the "refer to box art" cop out in the instructions for decal placement. All in all, though, I'm not unhappy and glad they did take the time to throw Indy fans a bone. 2 Quote Link to comment Share on other sites More sharing options...
stavanzer Posted August 4, 2022 Share Posted August 4, 2022 Looks like it is going to be a right Bugger to paint, though. And the decals look to be just barely adequate. Two piece tires may be the only way to get correctly shaped tires in the kit. All'n'All not an easy or beginner kit. I hope your build goes well. 😃 1 Quote Link to comment Share on other sites More sharing options...
Mark Posted August 4, 2022 Share Posted August 4, 2022 The original vinyl tires in the Indy car kits were one-piece and had tread detail but no sidewall lettering. The two-piece tires have nice sidewall detail but no tread. Hopefully those are molded in black plastic, so the seam can be filled. Quote Link to comment Share on other sites More sharing options...
Jack L Posted August 4, 2022 Share Posted August 4, 2022 I have a build up I did years ago it has 1 pc tires with Firestone on the sidewalls and tread detail molded in a softer rubber Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted August 5, 2022 Share Posted August 5, 2022 1 hour ago, Mark said: The original vinyl tires in the Indy car kits were one-piece and had tread detail but no sidewall lettering. The two-piece tires have nice sidewall detail but no tread. Hopefully those are molded in black plastic, so the seam can be filled. They do seem to be plastic and I plan on sanding the seam smooth then painting them with AK Interactive Rubber Black like I do on armor and aircraft builds. 1 Quote Link to comment Share on other sites More sharing options...
Jon Cole Posted August 10, 2022 Share Posted August 10, 2022 Would I be wrong to assume that many parts will need to be chrome stripped? Treadless tires, excess chrome parts, I don't know if I'll bite on this one. Not with so many other kits to catch my attention (what little I have) Quote Link to comment Share on other sites More sharing options...
blizzy63 Posted August 10, 2022 Share Posted August 10, 2022 (edited) On 8/4/2022 at 4:42 PM, Mark said: The original vinyl tires in the Indy car kits were one-piece and had tread detail but no sidewall lettering. The two-piece tires have nice sidewall detail but no tread. Hopefully those are molded in black plastic, so the seam can be filled. Rear tires appear to be the same 2-piece Firestone "Bonneville" tires in the AMT/Round2 '37 Chevy Salt Shaker kit. Tires are molded in black and the seam sands out acceptably smooth. No tread detail; More like early track racing slick. Edited August 11, 2022 by blizzy63 Quote Link to comment Share on other sites More sharing options...
Mark Posted August 10, 2022 Share Posted August 10, 2022 The original version of the two-piece AMT tires were molded in something between plastic and nylon. Few glues would stick, tough to sand and fill seams. Some of the pre-Round 2 Stevens International kits (like the show rods) had the two-piece slicks molded in black styrene. Not quite as good as a vinyl slick, but much better than the "neither plastic nor vinyl" stuff from first time around. Quote Link to comment Share on other sites More sharing options...
keyser Posted August 11, 2022 Share Posted August 11, 2022 First issues had the F100 tires iirc? I think 37 Chev Bonneville car has somewhat similar. Quote Link to comment Share on other sites More sharing options...
Brian Austin Posted August 11, 2022 Share Posted August 11, 2022 I've understood these to be AMT race car tires, two different sizes. Were these the original tires issued in the above kit? The set I have came with a '60s F100. They were presumably the larger of the two. Are these the same size as the two-piece set above? I wouldn't mind seeing these reissued, if they were available. (Not likely, I know). 1 Quote Link to comment Share on other sites More sharing options...
Mark Posted August 11, 2022 Share Posted August 11, 2022 Those are the original one-piece tires from the two AMT Indy car kits. I'm not positive, but they look like the smaller tire. I don't have the Ford pickup kit with those tires, I sold mine many years ago. Comparing them to the two-piece units would verify which ones they are. Around the same time, AMT was using those tires in other kits. I believe the original issue Fireball 500 had the smaller ones. My Mach I concept kit has them also. The two toy-like tractor-trailer kits had the large ones, as did at least some of the "sand dragster" kits AMT was doing at that time. 1 Quote Link to comment Share on other sites More sharing options...
Justin Porter Posted August 11, 2022 Share Posted August 11, 2022 15 hours ago, Jon Cole said: Would I be wrong to assume that many parts will need to be chrome stripped? Treadless tires, excess chrome parts, I don't know if I'll bite on this one. Not with so many other kits to catch my attention (what little I have) Based on the pictures I've found, the chrome headers are dead wrong and the bulk of what's chrome in the kit was unpainted aluminum of one fashion or another. Indycals does a really great resin tire set for this kit, as well as a more comprehensive upgrade set that also includes a vac-formed windscreen with the correct profile (that isn't three miles thick) and a one piece nose cone that has the correct profile. I'd considered getting this set for my build but between this is more of a basic palette cleanser between higher detailed projects (wrapping up a customer build of a Tamiya 1/48th scale G4M1 Betty and a personal build of the Bronco 1/35th Landwasserschlepper) and knowing that even with the resin I still have the kit's pretty rudimentary engine to deal with AND it's 1/25th rather than 1/20th which makes it wonky to display with my other open wheel builds. Quote Link to comment Share on other sites More sharing options...
dodgefever Posted August 11, 2022 Share Posted August 11, 2022 8 hours ago, Mark said: Those are the original one-piece tires from the two AMT Indy car kits. I'm not positive, but they look like the smaller tire. I don't have the Ford pickup kit with those tires, I sold mine many years ago. Comparing them to the two-piece units would verify which ones they are. I think you're correct that they are the smaller one. The larger size is really huge... I have a Sand Hog kit that has two of the small ones and four large. Quote Link to comment Share on other sites More sharing options...
keyser Posted August 11, 2022 Share Posted August 11, 2022 Yes, same in my Mach 1. And 63 F100 had both Quote Link to comment Share on other sites More sharing options...
Bill J Posted August 12, 2022 Share Posted August 12, 2022 If I weere building one of those 1963 Lotus kits, I would see about getting Michael at Indycals to get some more of the upgrade kits produced. https://www.indycals.net/parts/indyparts/63lotus29upgrade.html Quote Link to comment Share on other sites More sharing options...
64Comet404 Posted August 13, 2022 Share Posted August 13, 2022 On 8/4/2022 at 7:49 PM, Jack L said: I have a build up I did years ago it has 1 pc tires with Firestone on the sidewalls and tread detail molded in a softer rubber I wonder if you have the IMC version of this car, because it did have some nicer tires than the AMT ones. Perry's Resin used to offer them (I know this because my copies were the masters), but I don't know if any other casters offered them. Quote Link to comment Share on other sites More sharing options...
Jack L Posted August 13, 2022 Share Posted August 13, 2022 19 minutes ago, 64Comet404 said: I wonder if you have the IMC version of this car, because it did have some nicer tires than the AMT ones. Perry's Resin used to offer them (I know this because my copies were the masters), but I don't know if any other casters offered them. will have to ck. thanks Quote Link to comment Share on other sites More sharing options...
Mark Posted August 13, 2022 Share Posted August 13, 2022 IMC's tires were definitely better. If they are one-piece, and have sidewall lettering, they are indeed IMC. For the relatively few kits that company made during its brief existence, they made a bunch of different tires, most of them very well done. Quote Link to comment Share on other sites More sharing options...
Dave Darby Posted August 14, 2022 Share Posted August 14, 2022 (edited) On 8/11/2022 at 6:02 AM, Mark said: Those are the original one-piece tires from the two AMT Indy car kits. I'm not positive, but they look like the smaller tire. I don't have the Ford pickup kit with those tires, I sold mine many years ago. Comparing them to the two-piece units would verify which ones they are. Around the same time, AMT was using those tires in other kits. I believe the original issue Fireball 500 had the smaller ones. My Mach I concept kit has them also. The two toy-like tractor-trailer kits had the large ones, as did at least some of the "sand dragster" kits AMT was doing at that time. I have an original issue Fireball 500 and I can confirm it did come with the smaller Indy car tires you mentioned. I'm running a pair on the back of this AMT Deuce. I wish Round2 would/could find or clone the 'implement' tires I have on the front. Edited August 14, 2022 by Dave Darby 1 Quote Link to comment Share on other sites More sharing options...
Luc Janssens Posted August 14, 2022 Share Posted August 14, 2022 18 hours ago, Mark said: IMC's tires were definitely better. If they are one-piece, and have sidewall lettering, they are indeed IMC. For the relatively few kits that company made during its brief existence, they made a bunch of different tires, most of them very well done. Did any of these IMC tires resurface during the Lindberg ownership, and if the tooling is usable would it be a good move for Round-2 to use them on future re-releaes of selected ex amt/mpc kits? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.