BIGTRUCK Posted October 5, 2021 Share Posted October 5, 2021 This idea uses 3 kits. The base is a 1:32 amphibious tank. The body needed to be spun so the taper is in the back along with the drive cogs. Then fill in the big void left over from the turret. Built a tail roller and added tread plate over the repair. I found the easiest part ( and it was all luck) when I cut the cab so it would mount up, it fit exactly like I needed it , interior and all associated parts too. Started mounting the Peerless logging equipment on board today, and so far no glitches.🤞😃 Quote Link to comment Share on other sites More sharing options...
yh70 Posted October 5, 2021 Share Posted October 5, 2021 ok..interesting..now u know the trailer has to be on tracks or it want look good... 1 Quote Link to comment Share on other sites More sharing options...
bismarck Posted October 5, 2021 Share Posted October 5, 2021 Boy that track could move some timber!! Cool project Ken.👍🏻😎 Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted October 6, 2021 Share Posted October 6, 2021 Very interesting and cool project Ken! Quote Link to comment Share on other sites More sharing options...
chris chabre Posted October 6, 2021 Share Posted October 6, 2021 COOL Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted October 8, 2021 Share Posted October 8, 2021 this is gonna a be a fun build ! cool idea using the tracks and cab together, it really fits well Some utilities company is laying groundwork for upgrades nearby.There's similar tracked vehicles driving around the woods on wood platforms. Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted October 8, 2021 Author Share Posted October 8, 2021 (edited) 19 hours ago, gotnitro? said: Some utilities company is laying groundwork for upgrades nearby.There's similar tracked vehicles driving around the woods on wood platforms. In the early 90's I worked as a driver for an electrical contractor for the power company, they had a few Husky 8's and some bigger tracked vehicles to bring in float flat beds on those wooden crane mats. Edited October 8, 2021 by BIGTRUCK 1 Quote Link to comment Share on other sites More sharing options...
Sam I Am Posted October 13, 2021 Share Posted October 13, 2021 That is awesome looking. Definitely following this one. Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted October 21, 2021 Author Share Posted October 21, 2021 Added another kit into the mix, an M1 A1 Abrams tank by Academy in 1:35th to be converted into my rear power . After much cutting and many test fits this is pretty close to where its going. The tracks are a loose fit as they needed to be shortened and are just on for the mock up. Now I have many tank parts left over if anyone is needing. Quote Link to comment Share on other sites More sharing options...
chris chabre Posted October 21, 2021 Share Posted October 21, 2021 so awesome! Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted October 21, 2021 Share Posted October 21, 2021 Now thats a swamp logger!!! Love the concept Quote Link to comment Share on other sites More sharing options...
Bainford Posted October 21, 2021 Share Posted October 21, 2021 Very cool project. Is the trailer portion powered? A hydraulic pump on the tractor, some hoses to a hydraulic motor on the trailer would do it. Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted October 21, 2021 Author Share Posted October 21, 2021 4 hours ago, Bainford said: Very cool project. Is the trailer portion powered? A hydraulic pump on the tractor, some hoses to a hydraulic motor on the trailer would do it. I have a long way to go, I have hangers to hold up lines. The hard part was getting the tracks on the rear unit rejoined as they were trimmed down to fit the cut-down body. This build is still pretty much in the trial and error stage..😀 Quote Link to comment Share on other sites More sharing options...
gatorincebu Posted October 21, 2021 Share Posted October 21, 2021 Ken, Now that is a unique vehicle , And I love it . I will be following this build to see how you finish it . Be Well Gator Quote Link to comment Share on other sites More sharing options...
Oldmopars Posted October 22, 2021 Share Posted October 22, 2021 (edited) I like it. You may want to swap the drive wheel with the forward idler wheel, the drive wheel would never be that close to the ground, always up high to avoid getting rocks and garbage caught in it. I love the creativity and the direction this is going, keep up the good work. Edited October 22, 2021 by Oldmopars Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted October 22, 2021 Author Share Posted October 22, 2021 18 hours ago, Oldmopars said: The drive wheel would never be that close to the ground. I wanted to keep the drive on both units to the back but I can raise the drives up some and back to tighten the tracks. Cut off the wheel dowel pins and install the drive wheels on evergreen rod. Thanks for the heads up. Quote Link to comment Share on other sites More sharing options...
yh70 Posted October 28, 2021 Share Posted October 28, 2021 (edited) On 10/22/2021 at 4:04 PM, BIGTRUCK said: I wanted to keep the drive on both units to the back but I can raise the drives up some and back to tighten the tracks. Cut off the wheel dowel pins and install the drive wheels on evergreen rod. Thanks for the heads up. you got it going your way now , only thing i see u need to do and im sure u already know is the trailer stinger needs to be at least another 2 inches added to the front (dont want the rear to close to the truck) and at least another 2 to 3 inches out the back . another thing are u gonna also haul the trailer on the back of the truck ? if so make sure u got the right width on the rear tracks..i know i rattle to much but im a scratch builder and just trying to help.. Edited October 28, 2021 by yh70 1 Quote Link to comment Share on other sites More sharing options...
DrKerry Posted October 29, 2021 Share Posted October 29, 2021 Now that is too kool!!!!! Quote Link to comment Share on other sites More sharing options...
chris chabre Posted October 31, 2021 Share Posted October 31, 2021 now I want to build something tracked.... Quote Link to comment Share on other sites More sharing options...
slusher Posted November 11, 2021 Share Posted November 11, 2021 Veery neat build idea". Quote Link to comment Share on other sites More sharing options...
OldTrucker Posted November 11, 2021 Share Posted November 11, 2021 What a change in the truck building realm this one is!LOL I like it!!! Quote Link to comment Share on other sites More sharing options...
BIGTRUCK Posted April 26, 2022 Author Share Posted April 26, 2022 After being on the back burner for a few months, I picked up the pace and started to get things done. Chopping the rear unit and getting the tracks fused back together took time. The work thats taking the most time is weathering every piece being used no matter how small before adding it to the model, sometimes painting an item 3 colors to achieve a certain look, then lightly hit it with 400 grit . A long way to go but its time to stay with it ... 1 Quote Link to comment Share on other sites More sharing options...
Mopar - D Posted April 26, 2022 Share Posted April 26, 2022 Nice progress update Ken. Quote Link to comment Share on other sites More sharing options...
gotnitro? Posted April 26, 2022 Share Posted April 26, 2022 awesome work ! Quote Link to comment Share on other sites More sharing options...
Dutzie Posted April 30, 2022 Share Posted April 30, 2022 Wow! This thing is so cool! Great work. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.