youpey Posted November 6, 2021 Share Posted November 6, 2021 (edited) I got this kit years ago, and stopped immediately on it because the front piece on the body doesn't sit right. I worked it for a while and im pretty happy with it now I finally decided it was time to build it or toss it. I dont have enough space for the kits i have, and since the 67 mustang fastback was my dream car growing up, and even today, i said im going to do it. The body is full prepped and ready for primer and paint. Im going to soray it tomorrow. its going to be tamiya ts54, light metallic blue. Its my new favorite color from tamiya. I did my 79 bronco this color. I need to do more work on the wheels and tires and then finish putting it all together. I came to a screeching halt on this because I had a rough week health wise, but i should be ready to ho again tomorrow Edited November 6, 2021 by youpey 1 Quote Link to comment Share on other sites More sharing options...
Olskoolrodder Posted November 6, 2021 Share Posted November 6, 2021 Looking great so far! Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted November 6, 2021 Share Posted November 6, 2021 Nice start on it. This style of Mustang is my favourite!👍 1 Quote Link to comment Share on other sites More sharing options...
Painted Black Posted November 6, 2021 Share Posted November 6, 2021 Looks like your on the home stretch should look good in that blue. 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted November 7, 2021 Share Posted November 7, 2021 Chassis and interior look really nice.. Quote Link to comment Share on other sites More sharing options...
Zippi Posted November 7, 2021 Share Posted November 7, 2021 Looking good so far and should be a nice build. I like the Mustangs and just picked up the Revell 66 Mustang at Michael's on sale. Quote Link to comment Share on other sites More sharing options...
afx Posted November 7, 2021 Share Posted November 7, 2021 Clean work. Quote Link to comment Share on other sites More sharing options...
absmiami Posted November 7, 2021 Share Posted November 7, 2021 Problem solving - you’re making room on the kit shelves - but your fastback will eventually fight for space on the display shelves - but that’s a good problem ! Quote Link to comment Share on other sites More sharing options...
youpey Posted November 7, 2021 Author Share Posted November 7, 2021 Thank you all for the very nice comments. i really appreciate it. Unfortunately I am still getting over my minor health problem, so i didn't feel up to painting the body. Im hoping another day or two and i will be ready to go. With that, i realized I didn't paint the air cleaner. I took it off and sprayed it with tamiya smoke to knock off a bit of shine. I also painted the white on the air filter media. I also added more black wash to the valve covers. Its a lot better in my opinion. I also cleaned up the tires and installed them. i wasn't getting a 4 wheel touch on the floor and it took me a while to figure out why, but one of the tires was not flat, it had and edge, and that was lifting the opposite side. I took a nail file and straightened it out and it lays right now. Quote Link to comment Share on other sites More sharing options...
happy grumpy Posted November 8, 2021 Share Posted November 8, 2021 great work so far, I like the exhaust pipe color, the heat effect is really good. Hope you get better soon. Quote Link to comment Share on other sites More sharing options...
tbill Posted November 8, 2021 Share Posted November 8, 2021 Looks great so far, that blue should killer on that body. Hope you’re feeling well soon. Quote Link to comment Share on other sites More sharing options...
youpey Posted November 9, 2021 Author Share Posted November 9, 2021 (edited) 9 hours ago, happy grumpy said: great work so far, I like the exhaust pipe color, the heat effect is really good. Hope you get better soon. thank you. im starting to feel much better now. i have tomorrow off for my dr appointment and the rest of the day is reserved for painting this body. the exhaust is model master metalizers burnt metal. i got it many years ago. i just brush paint it on, and where i start and stop brushing seems to get a slightly different color compared to the middle of the stroke. the start and stop look like the burnt part. on the curves, i will brush from the curve. its kind of hard to tell in the pictures, but its important when brushing it that you do one long stroke on the straight part it will get a "burnt" part where you stop. also, the paint needs to be shaken constantly in between strokes or it will just be dark gray. it says for airbrush only but its really thin, like the old humbrol paints, so it goes on nicely with a brush i also used this color for the dry brush on the chassis. it gives an interesting color i think. Edited November 9, 2021 by youpey Quote Link to comment Share on other sites More sharing options...
youpey Posted November 9, 2021 Author Share Posted November 9, 2021 (edited) The body is painted. There are 2 small spots of dust, and im going to sand them out Im happy with the shine. The next update will be when the car is finished Edited November 9, 2021 by youpey Quote Link to comment Share on other sites More sharing options...
Painted Black Posted November 9, 2021 Share Posted November 9, 2021 That paint looks real good. perfect blue for a Mustang. Quote Link to comment Share on other sites More sharing options...
moparfarmer Posted November 9, 2021 Share Posted November 9, 2021 Nice paint and have a ?..When you glued in the front and rear pans/facia did you have to modify the chassis to fit or was it an easy fit? Quote Link to comment Share on other sites More sharing options...
tbill Posted November 9, 2021 Share Posted November 9, 2021 Oh yeah, that looks great! Quote Link to comment Share on other sites More sharing options...
TransAmMike Posted November 9, 2021 Share Posted November 9, 2021 Very nice paint job Miles.....but what paint and your process? Quote Link to comment Share on other sites More sharing options...
Bainford Posted November 9, 2021 Share Posted November 9, 2021 The paint looks good, and I'm really digging the colour. What paint is it, and what colour primer, if any? Cheers. Quote Link to comment Share on other sites More sharing options...
youpey Posted November 9, 2021 Author Share Posted November 9, 2021 (edited) 1 hour ago, moparfarmer said: Nice paint and have a ?..When you glued in the front and rear pans/facia did you have to modify the chassis to fit or was it an easy fit? No, if i put the rear portion in firtst, its no issue. 1 hour ago, TransAmMike said: Very nice paint job Miles.....but what paint and your process? Tamiya primer. Very,very light coat of color. Doesn't matter if everything is covered. 2nd light coat, everything must be covered. 3rd coat is heavier, but not so heavy it runs. Single coat of tamiys clear, about as heavy as 3rd coat. I replied your post in the questions area in more detail a few days ago. I just checked, and the response to the full.prep is on the first page on your topic. 59 minutes ago, Bainford said: The paint looks good, and I'm really digging the colour. What paint is it, and what colour primer, if any? Cheers. Its tamiya white primer first. The color is tamiya ts54, light metallic blue Edited November 9, 2021 by youpey Quote Link to comment Share on other sites More sharing options...
Dominik Posted November 10, 2021 Share Posted November 10, 2021 looks very nice. well done so far! Quote Link to comment Share on other sites More sharing options...
David G. Posted November 10, 2021 Share Posted November 10, 2021 Chassis, engine, body work and paint all look great so far. David G. Quote Link to comment Share on other sites More sharing options...
youpey Posted November 10, 2021 Author Share Posted November 10, 2021 (edited) I am finished. I realized that i couldn't put it together with the firewall in place, so i put the firewall in the engine compartment and put it together and used toothpick to line it up. Overall a pretty fun build. I had a couple of mistakes but overall im pretty happy with it. Edited November 10, 2021 by youpey Quote Link to comment Share on other sites More sharing options...
gbtr6 Posted November 10, 2021 Share Posted November 10, 2021 I used this kit to make a '67 coupe for my son. He has the 1:1 version. Your color and ours looks similar, Acapulco Blue. It is finished, but I can't find any pictures of it finished. Perry Quote Link to comment Share on other sites More sharing options...
Dominik Posted November 11, 2021 Share Posted November 11, 2021 well done Miles, looks good. @Perry: that looks perfect!Have you made some pictures from the progress? Quote Link to comment Share on other sites More sharing options...
David G. Posted November 11, 2021 Share Posted November 11, 2021 Beautiful color, nicely detailed and built, Well Done! David G. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.