Kit Karson Posted January 7, 2022 Share Posted January 7, 2022 COMMON KIT CLASS: The Common Kit for GSL-XXVIII is the Revell 1929 Ford Model A Roadster (kit #RMX854463). The intent of this Class is for each entrant to start with the same kit, then display their widest array of individual creativity, craftsmanship, building skills, and technical innovations. The entrant may build the entry in any style or vintage. Regardless, all entered models must be based upon the parts from this kit. Entrants may also: i) swap parts from any other kit(s); ii) use any aftermarket parts (except for complete aftermarket resin bodies); and iii) use any building materials, techniques or technologies without restriction. '29 Track Nose Roadster '41 Lincoln V-12 Flat Head 4 Quote Link to comment Share on other sites More sharing options...
bisc63 Posted January 7, 2022 Share Posted January 7, 2022 Cool project! Will be following along... 1 Quote Link to comment Share on other sites More sharing options...
chris chabre Posted January 7, 2022 Share Posted January 7, 2022 this is going to be good! whats the trans off of? Rat roadster? 1 Quote Link to comment Share on other sites More sharing options...
cobraman Posted January 7, 2022 Share Posted January 7, 2022 Got me interested. 1 Quote Link to comment Share on other sites More sharing options...
mrm Posted January 8, 2022 Share Posted January 8, 2022 Great start. I always wanted to build a rod with a flathead v12. By the way, that GSL XXVII is going to be in a year and a half, correct? 1 Quote Link to comment Share on other sites More sharing options...
89AKurt Posted January 8, 2022 Share Posted January 8, 2022 Nice choice of engine, I love V12s but am used to the Italian versions. I've wondered if there is a minimum content amount required, all I know from the VW contest that resin conversion bodies are not allowed. Look forward to watching. 😎 1 Quote Link to comment Share on other sites More sharing options...
espo Posted January 8, 2022 Share Posted January 8, 2022 I like the track nose idea. 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 17, 2022 Author Share Posted January 17, 2022 On 1/7/2022 at 5:24 PM, chris chabre said: this is going to be good! whats the trans off of? Rat roadster? It's the stock manual transmission out of the Monogram 1/24th scale 1941 Lincoln Continental Convertible. 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 17, 2022 Author Share Posted January 17, 2022 On 1/7/2022 at 8:16 PM, mrm said: Great start. I always wanted to build a rod with a flathead v12. By the way, that GSL XXVII is going to be in a year and a half, correct? May 2023 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 17, 2022 Author Share Posted January 17, 2022 On 1/7/2022 at 9:26 PM, 89AKurt said: Nice choice of engine, I love V12s but am used to the Italian versions. I've wondered if there is a minimum content amount required, all I know from the VW contest that resin conversion bodies are not allowed. Look forward to watching. 😎 Brother, how are the GSL management going to respond if this roadster is being towed by my '28 XPU? 1 Quote Link to comment Share on other sites More sharing options...
Rocking Rodney Rat Posted January 17, 2022 Share Posted January 17, 2022 6 minutes ago, Kit Karson said: It's the stock manual transmission out of the Monogram 1/24th scale 1941 Lincoln Continental Convertible. I believe the question about the trans is in relation to the white transmission in the right side of your pic above. It does look like the transmission from the Rat Roaster. This looks like a nice project. Good to see you're up and about again, KK... -RRR 1 Quote Link to comment Share on other sites More sharing options...
chris chabre Posted January 17, 2022 Share Posted January 17, 2022 i mean the modern OD trans behind it in the engine photo haha 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 17, 2022 Author Share Posted January 17, 2022 On 1/8/2022 at 3:20 PM, espo said: I like the track nose idea. Me too, David! Although, I had to change the attitude of the track nose from the Revell '29 Roadster/PU kit: '29 Track Nose Roadster Mock-Up after Surgery Need to lengthen the hood... -KK Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 17, 2022 Author Share Posted January 17, 2022 Because the Revell '29 Roadster kit offers a choice of two frames, the '29 Track Nose Roadster will be running on the '29's Deuce frame. Revell's Deuce Rails are designed to allow the builder to have a High Boy roadster. Looking down at the deuce rails you can see the difference between the rear of the frame designed to fit inside and under the roadster body: To achieve the track nose's overall height the body will be channeled over the frame, so modifying the rails to fit under the body took some studying. Here's the before and after: Narrowing the '29 Deuce Frame Notches Kut Out Might have to lengthen the Narrowed '29 Deuce Frame to fit the '41 Lincoln V-12 Flat Head Quote Link to comment Share on other sites More sharing options...
CabDriver Posted January 17, 2022 Share Posted January 17, 2022 This is gonna be a cool build! Following! 1 Quote Link to comment Share on other sites More sharing options...
Dennis Lacy Posted January 17, 2022 Share Posted January 17, 2022 Nice work squeezing the frame! Instead of stretching the frame, shove the engine under the cowl. 😁 2 Quote Link to comment Share on other sites More sharing options...
geemoney Posted January 17, 2022 Share Posted January 17, 2022 notching the frame "joint".... so cool! 1 Quote Link to comment Share on other sites More sharing options...
espo Posted January 17, 2022 Share Posted January 17, 2022 The Track Nose looks like a little bit of work, but well worth it. 1 Quote Link to comment Share on other sites More sharing options...
Paul Payne Posted January 17, 2022 Share Posted January 17, 2022 Great project! Might the v-12 be getting Ardun heads? Really like the front mounted blower! 1 Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted January 17, 2022 Share Posted January 17, 2022 Cool project!🤪 1 Quote Link to comment Share on other sites More sharing options...
bobthehobbyguy Posted January 18, 2022 Share Posted January 18, 2022 Love the step photos. Nice work on the frame and noise. 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 18, 2022 Author Share Posted January 18, 2022 On 1/7/2022 at 5:24 PM, chris chabre said: this is going to be good! what's the trans off of? Rat roadster? Chris, you are correct! Rat Roaster TKO500 Trany Rat Roaster TKO500 Trany Separation from the tree: (Note: AMT Phantom Vickie Deuce Frame) It had to be an act from at least four/five years ago. The side that's up in the above picture shows seventeen years of abuse of benchtop cutting board. I looked back at the title of the folder: '29 Track Nose Roadster '41 Lincoln V-12 Flat Head\'29 Track Roadster Lincoln V-12\S.C.O.T. Potvin V-12 Lincoln 3-14-16 In fact, the date of this picture was June 22, 2016... wanna guess how long this roadster concept had been rattling around in the back of my mind!?. Back in the first month of 2011, Brother @Rocking Rodney Rat started on his Lakes Turtledeck Potvin Flat Head Roadster: I was over the top with RRR's rendition of the Potvin Supercharged Flat Head V-8! Build pics @: http://public.fotki.com/jferren/lakes-turtledeck/ A rare look at RRR working at my bench: Thanks for the memories, @chris chabre-KK 1 Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 18, 2022 Author Share Posted January 18, 2022 16 hours ago, Paul Payne said: Great project! Might the v-12 be getting Ardun heads? Really like the front mounted blower! Thought has crossed my mind! After having the stock heads chromed and the fact that these are narrower than the Ardun counterparts. -KK Quote Link to comment Share on other sites More sharing options...
Kit Karson Posted January 18, 2022 Author Share Posted January 18, 2022 (edited) 20 hours ago, Dennis Lacy said: Nice work squeezing the frame! Instead of stretching the frame, shove the engine under the cowl. 😁 ADL, we are so on the same page! From my initial measurements and considering the centered single seat version: The Steering Gear (suit sprint car) is from The Parts Box: http://www.thepartsbox.com/ It may require both centering the weight of the engine rearward and retaining legroom for the pilot as a rationale for a bit of frame extension. A longer wheelbase is also a plus along with a slightly stretched hood will add to the sleek style of a '29 Track Nose Roadster! -KK Edited January 18, 2022 by Kit Karson Add a picture... Quote Link to comment Share on other sites More sharing options...
chris chabre Posted January 18, 2022 Share Posted January 18, 2022 anytime!!! Per usual, I'm really digging what you're doing! 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.