mrm Posted February 8, 2022 Share Posted February 8, 2022 (edited) looks like a great kit and you are definitely doing a great job with it. I personally would have gone with darker red, as Ferrari used different red than what todays rosso corsa is. about the story with the real Ferrari, I don’t mean to rain on anyone’s parade, but that is not the first Ferrari car. The car in the picture caused a lot of stir when it resurfaced, but by now it is known that the oldest part on it is its Motto body (which is unique) originally made for serial number 002C, which in turn was the third Ferrari made. Edited February 8, 2022 by mrm Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 10, 2022 Author Share Posted April 10, 2022 The grill on the 166 Ferrari. This took a little time. Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted April 10, 2022 Share Posted April 10, 2022 Great work! It looks like a beautiful kit.🙂 Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 10, 2022 Author Share Posted April 10, 2022 14 minutes ago, NOBLNG said: Great work! It looks like a beautiful kit.🙂 Thank you NOBLNG. Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 11, 2022 Author Share Posted April 11, 2022 Primed some interior parts. Fitting engine to chassis. Made the grill. Built long block. Quote Link to comment Share on other sites More sharing options...
beeRS Posted April 14, 2022 Share Posted April 14, 2022 This is going to be a beauty! Lovely paint job. Who makes this kit? MFH? Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 14, 2022 Author Share Posted April 14, 2022 8 hours ago, beeRS said: This is going to be a beauty! Lovely paint job. Who makes this kit? MFH? Hello beeRS. Yes it is a mfh kit. But it needs a few things. I will try to make a hood and deck lid hinge. They are not included in the kit. Made a firewall. If you notice, there is a gap between the floor and the dash arrangement. So I made a firewall out of some evergreen. The kit engine has plug wires, but no other wire details are included. So you have to come up with the extra detail wires. No brake lines, or other lines are included. Need to fab a throttle linkage. Well the list goes on and on. Good kit, although expensive, you need to fab some extra detail to get it the way you want. Thank you sir. 1 Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted April 14, 2022 Share Posted April 14, 2022 Very clever assembly jig for the grille insert. I'll have to remember that one. Quote Link to comment Share on other sites More sharing options...
Brudda Posted April 15, 2022 Author Share Posted April 15, 2022 On 4/14/2022 at 7:42 AM, Ace-Garageguy said: Very clever assembly jig for the grille insert. I'll have to remember that one. Thank you Ace. Could not hold the parts with my hands. Had some silly putty for masking and thought it might work. Glued into a square and took it out of the silly putty and filled in the rest of the photo etch grill. Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 8, 2022 Author Share Posted May 8, 2022 Started on the small Ferrari again. Added transmission, still has a lot to go. Quote Link to comment Share on other sites More sharing options...
dino246gt Posted May 9, 2022 Share Posted May 9, 2022 You're doing a great job on that kit, looks like it's going to be a fantastic model after you finish it, FORZA FERRARI! Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 11, 2022 Author Share Posted May 11, 2022 On 5/9/2022 at 12:57 PM, dino246gt said: You're doing a great job on that kit, looks like it's going to be a fantastic model after you finish it, FORZA FERRARI! Thank you dino246gt. Speaking of a Dino 246 gt, reminds me when Ferrari of Los Gatos was open. I saw the most beautiful Ferrari I ever saw at that time. It was a maroon Dino 246 gt with a beautiful tan interior. I believe it to be one of the most beautiful pininfarina design on a automobile. I have a Fujimi kit of one and am working on it a little at a time. It’s going to be maroon with a tan interior. Cool name, cool car! 1 Quote Link to comment Share on other sites More sharing options...
dino246gt Posted May 11, 2022 Share Posted May 11, 2022 1 hour ago, Brudda said: Thank you dino246gt. Speaking of a Dino 246 gt, reminds me when Ferrari of Los Gatos was open. I saw the most beautiful Ferrari I ever saw at that time. It was a maroon Dino 246 gt with a beautiful tan interior. I believe it to be one of the most beautiful pininfarina design on a automobile. I have a Fujimi kit of one and am working on it a little at a time. It’s going to be maroon with a tan interior. Cool name, cool car! Yes, I use that name because I used to have one! Sold it to settle a divorce back in 1983! Got back on my feet and after 20 years I was able to get a 308GTB. Dino 246GT is now out of my price range, sadly. 1 Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 11, 2022 Author Share Posted May 11, 2022 3 hours ago, dino246gt said: Yes, I use that name because I used to have one! Sold it to settle a divorce back in 1983! Got back on my feet and after 20 years I was able to get a 308GTB. Dino 246GT is now out of my price range, sadly. You are a very lucky man to have had the pleasure of owning one! I had a choice of a lime green 246 Dino or a silver 914-6. I bought the 914-6. Because I was told they had few problems. The 914-6 was still a fun car, just did not look as sexy as a Dino. Cool, I love the stories! Thank you for them! 1 Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 11, 2022 Author Share Posted May 11, 2022 Just now, Brudda said: You are a very lucky man to have had the pleasure of owning one! I had a choice of a lime green 246 Dino or a silver 914-6. I bought the 914-6. Because I was told they had few problems. The 914-6 was still a fun car, just did not look as sexy as a Dino. Cool, I love the stories! Thank you for them! By the way , I really love that 308 also. Another pininfarina beauty Quote Link to comment Share on other sites More sharing options...
Codi Posted May 14, 2022 Share Posted May 14, 2022 I just don't know how you can build a car this small and intricate Bruce. My hats are off to you. cheers, tim Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 15, 2022 Author Share Posted May 15, 2022 On 5/14/2022 at 3:33 AM, Codi said: I just don't know how you can build a car this small and intricate Bruce. My hats are off to you. cheers, tim Thank you Tim. A very big challenge. Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 16, 2022 Author Share Posted May 16, 2022 Wired the engine. Took a few hours to do. Quote Link to comment Share on other sites More sharing options...
peteski Posted May 16, 2022 Share Posted May 16, 2022 That is some impressive work Bruce! I noticed that the silver engine parts seem to have a textured surface. Was that present on the unpainted parts, or is it the silver paint itself? Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 16, 2022 Author Share Posted May 16, 2022 9 hours ago, peteski said: That is some impressive work Bruce! I noticed that the silver engine parts seem to have a textured surface. Was that present on the unpainted parts, or is it the silver paint itself? Hello Peteski, it’s the metal. I polished the parts and this is what I ended up with. In person it looks polished. And the rough texture is not present. The pics really make it look rough. Smallest Ferrari i have worked on. Mfh kits are time consuming. My friend Phil calls them (time suckers). Good detail but it does take a lot of time. ( One of my things I do , is I take pics of the model in various stages and look at the pics for flaws. ) This works very well if you want to put the model in a contest. What I have so far. Quote Link to comment Share on other sites More sharing options...
peteski Posted May 16, 2022 Share Posted May 16, 2022 Thanks for the explanation Bruce. You mentioned that this is the smallest Ferrari you have worked on. Isn't the kit 1:24 (standard) scale? Do you normally work on larger scale (1:16, 1:12, OR 1:8), or even on 1:1 scale Ferraris? Quote Link to comment Share on other sites More sharing options...
mrm Posted May 16, 2022 Share Posted May 16, 2022 If you want o make it realistic, the valve covers need to be semi-gloss black (more on the flat side). The texture the parts come in would be perfect for the krinkle finish of the original. Also the tubes that collect all the spark wires need to be polished. Quote Link to comment Share on other sites More sharing options...
absmiami Posted May 16, 2022 Share Posted May 16, 2022 The Barchettas had the early spec V12 with unpainted cam covers - some with - some without - the decrative ribs - about the magnetos - i’m building one w/ the mags mounted to the rear of the block - but i think ive seen photos of one or two that had front mounted - so MFH may have based their 24th sc kit on a car w the front mounts - i think their 12th sc Barchetta - which they produced last yr - has rear mounted magnetos - anyway - yours look good ! I took this photo at a Cavallino event nearly 20 years ago - sometimes you get lucky … Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 17, 2022 Author Share Posted May 17, 2022 16 hours ago, peteski said: Thanks for the explanation Bruce. You mentioned that this is the smallest Ferrari you have worked on. Isn't the kit 1:24 (standard) scale? Do you normally work on larger scale (1:16, 1:12, OR 1:8), or even on 1:1 scale Ferraris? Hello peteski, I like 1/25-24 the most. I did a 1/43 Ferrari Dino years ago. But it did not have a engine. I kind of fell into big scale a few years ago with my friend Mark. He needed someone to make kits and I was available at the time. He Works for DeAgostini USA. Did a Toyota 2000 gt( remember the lens was crooked and you helped me with that) and things kind of took off. Quote Link to comment Share on other sites More sharing options...
Brudda Posted May 17, 2022 Author Share Posted May 17, 2022 16 hours ago, absmiami said: The Barchettas had the early spec V12 with unpainted cam covers - some with - some without - the decrative ribs - about the magnetos - i’m building one w/ the mags mounted to the rear of the block - but i think ive seen photos of one or two that had front mounted - so MFH may have based their 24th sc kit on a car w the front mounts - i think their 12th sc Barchetta - which they produced last yr - has rear mounted magnetos - anyway - yours look good ! I took this photo at a Cavallino event nearly 20 years ago - sometimes you get lucky … Yes absmiami, I have done the research and the covers were not black. They were raw aluminum. As were most of the other parts. The mags in the mfh car have them in the front but in some photos like yours , they were mounted in the rear. I do not know the reason for that. Thank you sir. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.