Texas 3D Customs

[Calb56]

On 1/3/2023 at 1:29 PM, Texas_3D_Customs said:

Well it's the amount of people that are building using them. I don't do the limited time or special edition game so as I expand I continue to dig myself in deeper. But as I said I am going full time and hopefully I will make ends meet. I understand I will be doing a lifestyle change, but there's more to life than money.

Here's to more than a job to make a life!!!

Congratulations. 

[Mr. Metallic]

@Ace-Garageguy thought you'd be interested in this since you started that "ultimate SOHC 427" thread awhile back. I can attest that their offerings are top notch.

https://tx3dcustoms.com/products/ford-427-sohc-hilborn-injected

[Ace-Garageguy]

3 minutes ago, Mr. Metallic said:

@Ace-Garageguy thought you'd be interested in this since you started that "ultimate SOHC 427" thread awhile back. I can attest that their offerings are top notch.

Thanks. I've been looking at his offerings, and will definitely be ordering. The quality looks to be absolutely first-rate.  

[George Bojaciuk]

My third engine arrived today! Carb’d 572 and 2 TKOs!

Edited January 7, 2023 by George Bojaciuk

[Texas_3D_Customs]

Adding this option for the Cammer

[Finks Garage]

Here is my finished Baja VW using the Texas 3D Customs transkit offered. I used it on the Tamiya bug as I like it better than the Revell kit. 

[espo]

22 minutes ago, Finks Garage said:

Here is my finished Baja VW using the Texas 3D Customs transkit offered. I used it on the Tamiya bug as I like it better than the Revell kit. 

Looks great and I like the Paddle tires.   

[George Bojaciuk]

Only one comment…..it’s too clean! Really nice build!

[stavanzer]

The Build is Awesome! I like the colour.

Where did you source the wheel/tire package?

It rocks!

 

[Oldmopars]

18 hours ago, Finks Garage said:

Here is my finished Baja VW using the Texas 3D Customs transkit offered. I used it on the Tamiya bug as I like it better than the Revell kit. 

Nice, where did you get the wheels and tires?

[Finks Garage]

12 hours ago, stavanzer said:

The Build is Awesome! I like the colour.

Where did you source the wheel/tire package?

It rocks!

 

The wheels I make at www.finksgarage.com

The tires are scaled down files from COSPLAYITEMSROCK on Cults.com

[TarheelRick]

On 1/12/2023 at 5:01 PM, Texas_3D_Customs said:

Adding this option for the Cammer

Just received my copy of this engine yesterday and it is as much a piece of art as all the other parts I have received from Texas 3D Customs.  Not sure if it was meant to be, but I found an extra set of long-tube Hilborn injectors and manifold with mine. Already had the short-tube injected engine, so now I can go crazy with some mid-60's Ford drag cars.

[Mike C.]

I'm trying to order the Jackman wheel set and the engine, but I can only find the rear Jackmans on the site. What gives ?????

[Texas_3D_Customs]

More Flat 4's coming soon

[TooOld]

I like this one !   Can I choose which exhaust I get ?

 

 

[Texas_3D_Customs]

4 hours ago, TooOld said:

I like this one !   Can I choose which exhaust I get ?

 

 

So this is the exhaust that comes with the engine the quad tip and stinger will be add on items

[Texas_3D_Customs]

Another great model done By Scott printed by me. He is making it easy on me now. 

[Mike C.]

I keep checking the site, but I can't find the stinger exhaust or the winch bumpers.

[Texas_3D_Customs]

5 minutes ago, Mike C. said:

I keep checking the site, but I can't find the stinger exhaust or the winch bumpers.

Winch bumpers aren't done The stinger exhaust is in the upgrade section if you click on the plus button it'll bring up 572 and Volkswagen Porsche I think and then the singer exhaust is in there, you can also use the search bar and just type in stinger it'll pull up

Edited February 6, 2023 by Texas_3D_Customs

[LDO]

A Nailhead? Another great engine for an old school rod or custom. Nice. 

[Nicholas]

i am trying to get a size on their weld v series,or all 1/24 scale wheels to see if they will fir my tires,but no response from e mail,or messaging on site?

[Texas_3D_Customs]

47 minutes ago, Nicholas said:

i am trying to get a size on their weld v series,or all 1/24 scale wheels to see if they will fir my tires,but no response from e mail,or messaging on site?

Must have gone to spam, but the drag wheels come with tires and are not separately available.

[Nicholas]

Ok then what  is the overall OD of tires mounted on rims for the welds v series? And how wide?

[TransAmMike]

2 hours ago, Texas_3D_Customs said:

Must have gone to spam, but the drag wheels come with tires and are not separately available.

Hi Charles....question for ya Buddy.   You say the 1/24 engines look fine in the 1/25 models.  From what I have seen, they just look out of proportion, at least to me.

So is it possible the engines can be printed in 1/25 scale?    Doesn't hurt to ask huh?

[Texas_3D_Customs]

8 minutes ago, TransAmMike said:

Hi Charles....question for ya Buddy.   You say the 1/24 engines look fine in the 1/25 models.  From what I have seen, they just look out of proportion, at least to me.

So is it possible the engines can be printed in 1/25 scale?    Doesn't hurt to ask huh?

So I am just going to state the facts, 1:24 vs 1:25 for a whole engine with a transmission is usually a difference of 2mm in length total and a width of 0.7-1mm depending on the style like OHV vs Push Rod. I find it very hard to believe that 2mm the width of a pencil lead over the whole length of a powertrain is what is making it look out of proportion.