Lurch209 Posted May 20, 2022 Share Posted May 20, 2022 I started this build about two weeks ago & here is where I’m at on it now. I’ve pretty much got the chassis all done just waiting to repaint the lower 1/2 of the body & the interior panels/seats. I might of been closer to done but had an issue with the paint that caused me to strip everything down to bare plastic again. Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 20, 2022 Author Share Posted May 20, 2022 The exhaust from the box was for a 409 big block motor but I decided to use an in-line six from an old monogram 53 Chevy kit that I “built”(model skills were lacking back then) way back in the 90s plus the exhaust from the box was pretty ugly so I took some evergreen plastic rod and the actual muffler from the Kit and worked up my own. Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 20, 2022 Author Share Posted May 20, 2022 (edited) Chassis & blue flame six engine. I had to notch the rear wheel well section of the chassis to get the wheels to fit with the skirts that I made up for it. I used a couple of different shades of testors enamel to come up with the blue for the engine. It’s not spot on what Chevrolet was using back in the day for that blue flame six engines but close enough. Edited May 20, 2022 by Lurch209 Quote Link to comment Share on other sites More sharing options...
Zippi Posted May 20, 2022 Share Posted May 20, 2022 That's a good looking 54 Chevy. I like this build. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 21, 2022 Author Share Posted May 21, 2022 Thanks zippi Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted May 21, 2022 Share Posted May 21, 2022 The added engine detail goes a long ways. The white roof looks great, good luck with the black! 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 21, 2022 Author Share Posted May 21, 2022 Here’s a little before photo I forgot I had. Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 21, 2022 Author Share Posted May 21, 2022 Here’s a little before photo I forgot I had. Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 21, 2022 Author Share Posted May 21, 2022 1 hour ago, Smoke Wagon said: The added engine detail goes a long ways. The white roof looks great, good luck with the black! It sure does though I should of used thinner wires, I might redo those. Quote Link to comment Share on other sites More sharing options...
espo Posted May 21, 2022 Share Posted May 21, 2022 Your added details on the engine look good, you even got the fuel filter in there. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted May 21, 2022 Author Share Posted May 21, 2022 Thanks espo. for the fuel filter& line I used, I think they’re called diodes for computers and other electronics. I bought a pack that had like 20 for around $5 Quote Link to comment Share on other sites More sharing options...
slusher Posted May 21, 2022 Share Posted May 21, 2022 I wouldn’t worry about the wires I would keep moving forward with your build. you have some good things going on your project, keep on building… 1 Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted May 21, 2022 Share Posted May 21, 2022 13 hours ago, Lurch209 said: It sure does though I should of used thinner wires, I might redo those. I wouldn’t worry. Looks more convincing than my method for plug wires. And if anyone points it out, you can say they’re just well insulated. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted June 1, 2022 Author Share Posted June 1, 2022 Here’s a few update pics. The tamiya white laid out on the roof beautifully but the black looked crappy. It was full of what looked like pin holes. I wet sanded it it with 2k followed by 3k & it seemed to of smoothed it out pretty good. I’m about done with the interior, laid some water decal seat patterns I got at NNL west a few years ago though I did manage to lift it in a couple spots while trying to clean up the loose flocking with tape. trying to find some bullet hole decals to lay on the trunk lid but everything I’ve found is 1/35 scale and way over in Ukraine oh well. 1 Quote Link to comment Share on other sites More sharing options...
dsummone Posted June 1, 2022 Share Posted June 1, 2022 Those seat decals look great! 1 Quote Link to comment Share on other sites More sharing options...
slusher Posted June 2, 2022 Share Posted June 2, 2022 On 5/31/2022 at 10:21 PM, dsummone said: Those seat decals look great! i agree and the dash looks great! 1 Quote Link to comment Share on other sites More sharing options...
Jantrix Posted June 2, 2022 Share Posted June 2, 2022 Real nice work. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted June 2, 2022 Author Share Posted June 2, 2022 Thanks guys. Going to start bare metal soon followed by clear. Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted June 21, 2022 Author Share Posted June 21, 2022 (edited) Well she’s done, came out ok I think. I still have a couple of minor touch ups to do on the bmf foil. The trim lines were pretty faint on this old revell which made it a bit of a pia but oh well. Edited June 21, 2022 by Lurch209 Quote Link to comment Share on other sites More sharing options...
Can-Con Posted June 21, 2022 Share Posted June 21, 2022 That looks great. It's one kit I don't have yet that I want to pick up some day after seeing how well you did yours. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted June 21, 2022 Author Share Posted June 21, 2022 Thanks. It’s a good looking kit but it isn’t perfect. The door panels are just a little difficult to get lined up and the front bumper is ugly. Thankfully this kit came with two different styles of rear bumper. I used one of them for the front. They’re pretty common on eBay. If you persistently look them up you can find one at a decent price. Quote Link to comment Share on other sites More sharing options...
dsummone Posted June 21, 2022 Share Posted June 21, 2022 That turned out very nice. I have been thinking of doing a garage of 40s and early 50s builds. 1 Quote Link to comment Share on other sites More sharing options...
Lurch209 Posted June 21, 2022 Author Share Posted June 21, 2022 13 minutes ago, dsummone said: That turned out very nice. I have been thinking of doing a garage of 40s and early 50s builds. That would be pretty cool. Would like to see others build this kit. I wish revell would re release it. Quote Link to comment Share on other sites More sharing options...
Bills72sj Posted June 21, 2022 Share Posted June 21, 2022 I like the diode fuel filter. Do you have a pic of the kit box art? 1 Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted June 21, 2022 Share Posted June 21, 2022 Great job. Glad to see the paint turned out nice. That’s quite a tasteful improvement over how the kit is out of box. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.