Jim B Posted November 13, 2022 Share Posted November 13, 2022 As much as i like Tamiya spray paint, I'm always a little apprehensive when I'm applying them because I know if I have a paint failure, I'll never get the paint off and I might as well buy a new kit. Fortunately, this has only happened to me twice. Well, it just happened again! It was recommended that I soak the parts in 91% isopropyl alcohol to strip the parts, buy that just made them wet. Even scrubbing didn't seem to have much effect. Anyone else have any ideas? Lacquer thinner? Turpentine? Gasoline & a match, maybe? Quote Link to comment Share on other sites More sharing options...
Dpate Posted November 13, 2022 Share Posted November 13, 2022 (edited) This product is what i use and it'll strip everything except enamel haven't tried that yet. The older the paint the longer it has to sit max is 13 hours. Max I've ever let anything sit has been 2 hours and comes off no problem without hurting the plastic. There is also another product that people were raving about on here while back, but i forgot what that product was. Not sure why it has thinner for coating clear on the label, but it's suppose to be paint remover on it lol. It'll strip 2K clear coat no problem too, and it'll strip fresh painted primer and color coat that's been baked for hours in bout 30 mins. Edited November 13, 2022 by Dpate Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted November 13, 2022 Share Posted November 13, 2022 12 minutes ago, Dpate said: This product is what i use... Hmmmm...I need to look up the MSDS and see what it is. Quote Link to comment Share on other sites More sharing options...
R. Thorne Posted November 13, 2022 Share Posted November 13, 2022 91 isopropyl alcohol soak overnight and light scrub with tooth brush has worked great for me for the past couple of years. Did you soak it overnight? Quote Link to comment Share on other sites More sharing options...
LL3 Model Worx Posted November 13, 2022 Share Posted November 13, 2022 DoT3 brake fluid will do the trick... that or wrap the body in bologna... then peel. 🤣 2 1 Quote Link to comment Share on other sites More sharing options...
Jim B Posted November 13, 2022 Author Share Posted November 13, 2022 Yes, soaked it overnight. Going to soak it longer, and try again tomorrow afternoon. Quote Link to comment Share on other sites More sharing options...
Dpate Posted November 13, 2022 Share Posted November 13, 2022 Scalecoat paint stripper for plastic is another product. Scalecoat paint stripper Quote Link to comment Share on other sites More sharing options...
Miatatom Posted November 13, 2022 Share Posted November 13, 2022 91% Isopropyl alcohol works good on Tamiya colors for me. I really have to scrub when removing Tamiya primer, though. Quote Link to comment Share on other sites More sharing options...
Ace-Garageguy Posted November 14, 2022 Share Posted November 14, 2022 1 hour ago, LL3 Model Worx said: ...that or wrap the body in bologna... then peel. 🤣 YUM !!! Fried bologna and old paint sammiges. 1 Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted November 14, 2022 Share Posted November 14, 2022 Is it Tamiya TS laquer? I’ve stripped a few bodies with that paint in my tub of Super Clean. I’ve found that scratching through the paint in a few inconspicuous spots helps the Super Clean dissolve the primer underneath. After letting it soak, the flexible Tamiya paint layer will peel off. Quote Link to comment Share on other sites More sharing options...
StevenGuthmiller Posted November 14, 2022 Share Posted November 14, 2022 30 minutes ago, Smoke Wagon said: Is it Tamiya TS laquer? I’ve stripped a few bodies with that paint in my tub of Super Clean. I’ve found that scratching through the paint in a few inconspicuous spots helps the Super Clean dissolve the primer underneath. After letting it soak, the flexible Tamiya paint layer will peel off. This is how I remove lacquer paint, but then again, I use Duplicolor primer, which is easily dissolved by Super Clean. My understanding is that Tamiya primer is much more difficult to remove. Steve Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted November 14, 2022 Share Posted November 14, 2022 5 minutes ago, StevenGuthmiller said: My understanding is that Tamiya primer is much more difficult to remove. I couldn’t say either, I use nothing but Rustoleum primer. How does the Duplicolor fair? Quote Link to comment Share on other sites More sharing options...
dragstk Posted November 14, 2022 Share Posted November 14, 2022 Ive used the Scalecoat with great success. I usually let it sit overnight but Ive seen results in a couple of hours. But it does have a harder time with Tamiya primer. If it is fresh (couple of days) it does better. But if its been on for much longer, it struggles Quote Link to comment Share on other sites More sharing options...
Jim B Posted November 14, 2022 Author Share Posted November 14, 2022 I've never had much luck stripping Tamiya TS paints in Super Clean either. Just gets wet. Riley, as I understand it from some (very) limited research, Tamiya TS paints are a synthetic lacquer. Whatever that means. I will have to look into some of these other products, so thank you all for the suggestions. Currently the pards are still in the alcohol, so we'll see what tomorrow afternoon brings. More frustration, probably. I am tempted to try lacquer thinner, but I'm worried what that might do to the plastic. Quote Link to comment Share on other sites More sharing options...
Smoke Wagon Posted November 14, 2022 Share Posted November 14, 2022 Yeah, that’s why I scratch through the TS paint in a few places so the super clean can make its way underneath the paint layer to eat at the primer layer instead. But if you’re using Tamiya primer, then like others said it wouldn’t be real effective. Good luck tomorrow Jim. 👍 Quote Link to comment Share on other sites More sharing options...
Plowboy Posted November 14, 2022 Share Posted November 14, 2022 I've only stripped one Tamiya paint job and I found that the 91% alcohol is the only thing that will strip it. It takes time. But, it will strip it off. By time, I mean weeks. Especially if you use Tamiya primer also. Is there no way to save the paint job you have? Quote Link to comment Share on other sites More sharing options...
LL3 Model Worx Posted November 14, 2022 Share Posted November 14, 2022 Seems like sanding the body down and a respray would be quicker and easier? I could be wrong but if lacquer primer has etched the plastic would you actually want to remove it 🤔 Quote Link to comment Share on other sites More sharing options...
espo Posted November 14, 2022 Share Posted November 14, 2022 The times I have needed to strip the paint on a model I have used Super Clean in the purple container. This can be found in just about any auto parts store and Wal Mart. The only drawback I have encountered is that it has little to no effect on the Tamiya primer. An old toothbrush will also come in handy for scrubbing body and door seems. Quote Link to comment Share on other sites More sharing options...
Oldcarfan27 Posted November 14, 2022 Share Posted November 14, 2022 13 hours ago, Jim B said: I am tempted to try lacquer thinner, but I'm worried what that might do to the plastic. DO NOT USE LACQUER THINNER AT ALL!!!!! It will dissolve plastic, quickly and permanently. Quote Link to comment Share on other sites More sharing options...
tbill Posted November 14, 2022 Share Posted November 14, 2022 Drop it off to me and I’ll put it in my scale coat ‘tank’ Quote Link to comment Share on other sites More sharing options...
NOBLNG Posted November 14, 2022 Share Posted November 14, 2022 13 hours ago, Jim B said: I am tempted to try lacquer thinner, but I'm worried what that might do to the plastic. 42 minutes ago, Oldcarfan27 said: DO NOT USE LACQUER THINNER AT ALL!!!!! It will dissolve plastic, quickly and permanently. But it will put an end to the dilemma of how to remove the paint!😳 Quote Link to comment Share on other sites More sharing options...
Jim B Posted November 14, 2022 Author Share Posted November 14, 2022 (edited) Ok, so no lacquer thinner. Got it, although like Greg said, it will put an end to my dilemma! 😄 Besides, it's that dreaded red plastic. Nothing seems to harm that stuff. Oh, and I contacted Tamiya USA Support, and this is what they say is "recommended": https://www.rcplanet.com/testors-easy-liftoff-remover-8-oz-tesf542143-tesf542143/p295312 Edited November 14, 2022 by Jim B Quote Link to comment Share on other sites More sharing options...
Dpate Posted November 14, 2022 Share Posted November 14, 2022 33 minutes ago, Jim B said: Ok, so no lacquer thinner. Got it, although like Greg said, it will put an end to my dilemma! 😄 Besides, it's that dreaded red plastic. Nothing seems to harm that stuff. Oh, and I contacted Tamiya USA Support, and this is what they say is "recommended": https://www.rcplanet.com/testors-easy-liftoff-remover-8-oz-tesf542143-tesf542143/p295312 That's so overpriced. The stuff i listed before will take off anything dunno bout enamel cause i haven't tried it, but it can take off 2K clear with ease so I'm sure it would take off enamel too. Just seems to be out of stock everywhere at the moment, but i would buy scalecoat before i would that over priced testors stuff get more for you money. But always strain after your done stripping to re-use the product better. Quote Link to comment Share on other sites More sharing options...
Sandboarder Posted November 14, 2022 Share Posted November 14, 2022 On 11/14/2022 at 7:47 AM, Jim B said: As much as i like Tamiya spray paint, I'm always a little apprehensive when I'm applying them because I know if I have a paint failure, I'll never get the paint off Have you searched the Tamiya catalog? Quote Link to comment Share on other sites More sharing options...
Jim B Posted November 15, 2022 Author Share Posted November 15, 2022 Actually, I have not. And I was kind of surprised the Tamiya recommended a Testors product. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.